• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.484-492
• /
• 2011

Power system analyses, which involve the handling of massive data volumes, necessitate the use of effective visualization methods to facilitate analysis and assist the user in obtaining a clear understanding of the present state of the system. This paper introduces an interface that compensates for the limitations of the visualization modules of dynamic security assessment tools, such as PSS/e and TSAT, for power system variables including generator rotor angle and frequency. The compensation is made possible through the automatic provision of dynamic simulation data in visualized and tabular form for better data intuition, thereby considerably reducing the redundant manual operation and time required for data analysis. The interface also determines whether the generators are stable through a generator instability algorithm that scans simulation data and checks for an increase in swing or divergence. The proposed visualization methods are applied to the dynamic simulation results for contingencies in the Korean Electric Power Corporation system, and have been tested by power system researchers to verify the effectiveness of the data visualization interface.

• Journal of Chest Surgery
• /
• v.17 no.4
• /
• pp.753-761
• /
• 1984

Most patients having annuloaortic ectasia are associated with marked dilatation of the sinuses of Valsalva and the aortic annulus as well as the huge aneurysm of the ascending aorta. A 19 year old male patient complaining of tightness on left posterior chest wall underwent cardiac angiography in which demonstrated annuloaortic ectasia with ascending aortic aneurysm and aortic insufficiency. The patient had corrective operation replacing the ascending aorta and aortic valve with a composite graft[Dacron prosthesis containing a Bjork-Shiley aortic valve] within the aneurysmal sac. The coronary orifices were anastomosed to the tubular Dacron prosthesis [30 mm in diameter] by means of a second smaller Gore-Tex tube [8mm in diameter]. The aneurysmal sac was trimmed by removing the redundant wall and then wrapped outer wall of the Dacron prosthesis. Postoperatively, mediastinal bleeding was temporarily observed in the operative day and satisfactory blood pressure was maintained with small dose of dopamine. One week later, large amount of serous effusion was drained out of the retrosternal space making partial disruption of the skin which was healed well by daily local dressing. The patient discharged in good condition on postoperative 29th day with no residual complications and is doing very well on the 4 months follow-up.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1639-1651
• /
• 1998

In this paper, we present analytical and simulation models for evaluating the operation of a uniprocessor computer which utilizes a time redundant approach (such as recomputation by shilted operands) for lault-tolerant computing. In the proposed approach, all incoming jobs to the uniprocessor are duplicated, thus two versions 01 each job must be processed. Three methods for appropriately scheduling the primary and sL'Condary versions of the jobs are proposed and analyzed. The proposed scheduling methods take into account the load and the fault rate of the uniprocessor to evaluate two figures of merit for cost and profit with respect to a delay in response time due to faults and fault tolerance. Our model utilizes a fault-tolerant schedule according to which it is possible to find an optimal delay (given by $\kappa$) based on empiric parameters such as cost, the load and the fault rate of the uniprocessor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.177-180
• /
• 1999

Nowadays, one of the major technical issues in manufacturing is to create an environment to promote collaboration among diverse engineering activities. Collaborative engineering is an innovative approach integrating widely distributed engineering activities through promoting information sharing and actual collaboration. It requires close interactions among developers, suppliers and customers, and consideration of entire product life cycle from concept to disposal. A carefully-designed operating system is crucial for successful collaboration of many different activities in a Networked Virtual Manufacturing System(NVMS). High extensibility, flexibility and efficiency ale the key characteristics requested of an operating system to handle the complexity of the NVMSs. In this paper, we propose a model of the operating system for collaborative engineering using concurrent quasi-procedural method(QPM). QPM is a goal-driven data management technique for distributed and parallel computing environments. It is to be applied to the evaluation of activities to be executed, validities of input data, execution path of activities for a needed output, and expected to greatly improve the productivity of operations by preventing redundant evaluations. Collaboration among many different engineering activities in NVMSs is to be performed by the network of agents that encapsulate the capabilities of both users and their tools.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1464-1469
• /
• 2003

In this paper, fault tolerant mechanisms are presented for a servo manipulator system designed to operate in a hot cell. A hot cell is a sealed and shielded room to handle radioactive materials, and it is dangerous for people to work in the hot cell. So, remote operations are necessary to handle the radioactive materials in the hot cell. KAERI has developed a servo manipulator system to perform such remote operations. However, since electric components such as servo motors are weakened with radiation, fault tolerant mechanisms have to be considered. For fault tolerance of the servo manipulator system, hardware and software redundancy has been considered. In the case of hardware, radioactive resistant electric components such as cables and connectors have been adopted and motors driving a transport have been duplicated. In case of software, a reconfiguration algorithm accommodating one motor's failure has been developed. The algorithm uses redundant axes to recover the end effector's motion in spite of one motor's failure.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.124-126
• /
• 2006

Pachydermodactyly is a rare distinct form of fibromatosis characterized by acquired, asymptomatic dense fibrosis and fibroblastic proliferation around one or more proximal interphalangeal joints. Intralesional triamcinolone injection may be helpful in improving the clinical appearance. A 20-year-old unemployed female patient gave a four years history of progressive swelling of the fingers affecting predominantly the proximal interphalangeal joints of index fingers of left hand and index, middle fingers of right hand. There was no pain and tenderness. Physical examination, complete blood count, antinuclear antibody, rheumatoid factor were unremarkable and radiograph of both hands showed soft tissue swelling only without bony abnormality. We excised the redundant soft tissue from the both sides of proximal interphalangeal joint with longitudinal elliptical fashion. After operation, the fingers of the patient showed marked improvement cosmetically. There were no motor or sensory changes. Pachydermodactyly was first reported in 1996 in Korea. Histologic features include an increased dermal accumulation of collagen and occasionally an increased number of fibroblast. We report for one patient with pachydermodactyly treated with longitudinal elliptical excision and obtained an improvement of clinical appearance.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.1
• /
• pp.35-44
• /
• 2016

Leading national R&D project to design a PWR spent nuclear fuel interim dry storage system that has been under development since mid-2009, which consists of a dual purpose metal cask and concrete storage cask. To ensure the safe operation of dry storage systems in foreign countries, major confinement monitoring techniques currently consist of pressure and temperature measurement. In the case of a dual purpose metal cask, a pressure sensor is installed in the interspace of bolted double lid(primary and secondary lid) in order to measure pressure. A concrete storage cask is a canister based system made of double/redundant welded lid to ensure confinement integrity. For this reason, confinement monitoring method is real time temperature measurement by thermocouple placed in the air flow(air intake and exit) of the concrete structure(over pack and module). The use of various monitoring technologies and operating experiences for the interim dry storage system over the last decades in foreign countries were analyzed. On the basis of the analysis above, development of the confinement monitoring technology that can be used optimally in our system will be available in the near future.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.194-199
• /
• 2009

Purpose: The orbital fat buldging may cause irregular contour of lower eyelid, which is not youthful appearance. The conventional method of fat excision may cause the eyeball to move backward and downward, making enopthalmia is inevitable. The transcutaneous approach to reach the orbital septum can increase the risks of scleral show resulting from scarification at the level of the septum orbicularis junction and damaging the vertical motor branches of the preseptal orbicularis oculi muscle of the lower eyelid. Method: From July 2007 to March 2008, total of 21 patients underwent transconjunctival capsulopapebral fascia fixation procedure. In 8 patients, the herniated fat pad of the lower eyelid was relocated back into the orbit without external skin excision using capsulopalpebral fascia fixation. But in 13 patients, excision of redundant skin of the lower eyelid was performed using pinching technique, not involving orbicularis oculi muslce. In 5 patients, lateral canthotomy was done bilaterally for good visual field. In 6 patients, lateral canthopexy was also combined to correct loosening of lower eyelid. Results: Most of the patients were satisfied after at least 5 months of follow up. No patient showed scleral show. But 2 patients complained of undercorrection slightly, without secondary operation in 1 patient and re - capsulopalpebral fascia fixtation through transconjunctival approach in another patient. Conclusion: Orbital fat repositioning using transconjunctival capsulopalpebral fascia fixation is a good procedure to show youthful appearance without increasing the risk of scleral show and also showed fast recovery compared to the conventional transcutaneous approach.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.489-500
• /
• 2014

In this study, remote handling strategies for a large-scale argon cell facility were considered. The suggested strategies were evaluated by several types of field test. The teleoperation tasks were performed using a developed remote handling system, which enabled traveling over entire cell area using a bridge transport system. Each arm of the system had six DOFs (degrees of freedom), and the bridge transport system had four DOFs. However, despite the dexterous manipulators and redundant monitoring system, many operators, including professionals, experienced difficulties in operating the remote handling system. This was because of the lack of a strategy for handling the installed camera system, and the difficulty in recognizing the gripper pose, which might fall outside the FOV (field of vision) of the system during teleoperation. Hence, in this paper, several considerations for the remote handling tasks performed in the target facility were discussed, and the tasks were analyzed based on ergonomic factors such as the workload. Toward the development of a successful operation strategy, several ergonomic issues, such as active/passive view of the remote handling system, eye/hand alignment, and FOV were considered. Furthermore, using the method for classifying remote handling tasks, several unit tasks were defined and evaluated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.105-113
• /
• 2004

This paper presents a design method for an asynchronous memory with a completion signal generation circuit meeting D-I model. The proposed design method is to generates a completion signal with dummy cell and a completion signal generation circuit to indicate completion of the required read or write operation to the processor. Dividing a memory exponentially to consider delay of a bit-line and a memory cell makes memory operates as a D-I model with minimum addition of redundant circuit. The proposed memory partitioning algorithm that divides entire memory into the several partitions with a exponentially increased size reduces the memory access delay by 40% compared with a conventional partitioning method to the same size.