• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.631-637
• /
• 1990

It is well-known that the redundancy can be exploited to avoid the singular regions of the redundant manipulators by increasing the manipulability. The method, however, requires excessive energy and gives rather large tracking errors since the manipulability is increased rapidly so that the manipulator avoids the singular region quickly. In this paper, a new method is proposed in which the increasing speed of the manipulability is confined to a certain bound. Therefore, in the proposed method, the movement energy and the tracking errors are reduced. The computer simulation studies are performed to show the validity of the method.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.638-648
• /
• 1990

An effective resolved motion control method of redundant manipulators is proposed to minimize the energy consumption and to increase the dexterity while satisfying the physical actuator constraints. The method employs the neural optimization networks, where the computation of Jacobian matrix is not required. Specifically, end effector movement resulting from each joint differential motion is first separated into orthogonal and tangential components with respect to a given desired trajectory. Then the resolved motion is obtained by neural optimization networks in such a way that 1) linear combination of the orthogonal components should be null 2) linear combination of the tangential components should be the differential length of the desired trajectory, 3) differential joint motion limit is not violated, and 4) weighted sum of the square of each differential joint motion is minimized. Here the weighting factors are controlled by a newly defined joint dexterity measure as the ratio of the tangential and orthogonal components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.103-106
• /
• 2001

A new control method for a redundant manipulator is developed using a local optimal torque and null space joint velocity. By solving the dynamic control equations of the system, the local optimal torque is obtained. If only the local optimal torque is used for controlling the robot there is a possibility that the system is unstable. To eliminate the characteristics of instability during the movements, the control law with a null space concept is used. The new method is applied to the 3-DOF planar manipulator. The simulation results show the effectiveness of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.37-40
• /
• 1988

It is well-known that the redundancy can be exploited to avoid the singular regions of the redundant manipulator by increasing the manipulability. The method, however, requires exprecessive energy and gives rather large tracking errors since the manipulability is increased repidly so that the manipulator avoid the singular region quickly. In this paper, a new method is proposed in which the increasing speed of the manipulability is confined to a certain bound. Therefore, in the proposed method, the movement energy and the tracking errors are reduced. The computer simulation studies are performed to show the validity of the method.

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.79-86
• /
• 2001

A method is presented for generating the path which significantly reduces residual vibration of the redundant, flexible robot manipulator in the presence of obstacles. The desired path is optimally designed so that the system completes the required move with minimum residual vibration, avoiding obstacles. The dynamic model and optimal path are effectively formulated and computed by using special moving coordinate, called VLCS, to represent the link flexibility. The path to be designed is developed by a combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems. The concept of correlation coefficients is used to select the minimum number of design variables. A planar three-link manipualtor is used to evaluate this method. Results show that residual vibration can be drastically reduced by selecting an appropriate path, in the presence of obstacles.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.168-177
• /
• 2007

In a number of fields, robots are being used for two purposes: efficiency and safety. Most robots, however, have single-actuator mechanism for each joint, where the tasks are performed with high stiffness. High stiffness causes undesired problems to the environment and robots. This study proposes redundant actuator mechanism as an alternative idea to cope with these problems. In this paper, Double-Actuator Unit (DAU) is implemented at each joint for applications of multi-link manipulators. The DAU is composed of two motors: the positioning actuator and the stiffness modulator, which enables independent control of positioning and compliance. A three-link manipulator with DAUs enables adaptive control of RCC. By modulating the joint stiffness of the manipulator and controlling the position of RCC, we can significantly reduce contact force during assembly tasks and surgical procedures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1297-1301
• /
• 1997

Generally, singularity analysis of 6-DOF parallerl manipulators is very difficult and, as result, velocity relation has many uncertainties. In this paper, an alternative method using the local structurizatioin method(LSM) for the analysis of singular configuraions is presented. With LSM, the velocity relation can be represented in a simple form, and the result is totally equivalent to the conventional velocity relation. The velocity relation suggested in this paper gives a closed-form solution of singularities.

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.298-308
• /
• 2000

In this paper a new two-arm cooperative assembly(or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly the adaptive accommodation controller is adopted since it does not require any complicated contact state analysis nor depends of the geometrical complexity of the assembly parts. Also the RMRC(resolved motion rate control) method using a relative jacobian is used to solve inverse kinematics for two manipulators. By using the relative jacobian the two cooperative redundant manipulators can be formed as a new single redundant manipulator. Two arms can perform a variety of insertion tasks by using a relative motion between their end effectors. A force/torque sensing model using an approximated penetration depth calculation a, is developed and used to compute a contact force/torque in the graphic assembly simulation . By using the adaptive accommodation controller and the force/torque sensing model both planar and a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally through a cooperative assembly task experiment using a humanoid robot CENTAUR which inserts a spatially bent pin into a hole its feasibility and applicability of the proposed algorithm verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1115-1120
• /
• 2003

The present paper shows the possible development of particle swarm optimization (PSO) based fuzzy-neural networks (FNN) which can be employed as an important building block in real life robot systems, controlled by voice-based commands. The PSO is employed to train the FNNs which can accurately output the crisp control signals for the robot systems, based on fuzzy linguistic spoken language commands, issued by an user. The FNN is also trained to capture the user spoken directive in the context of the present performance of the robot system. Hidden Markov Model (HMM) based automatic speech recognizers are developed, as part of the entire system, so that the system can identify important user directives from the running utterances. The system is successfully employed in a real life situation for motion control of a redundant manipulator.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3871-3882
• /
• 1996

In this paper, a closed-form formulation for inverse kinematics of robot manipulators with kinematic redundancy under the constrained environment has been derived using the Kuhn-Tucker condition, the extended Lagrange multiplier method and the working set method. The proposed algorithm satisfies the necessaryand sufficient conditions for optimization subject to equality and inequality constraints. In addition, computationally efficient kinematic control methods have been proposed using differential kinemetics and gradient projection mehtod. The effectiveness of the proposed methods has been demonstrated with a 4-dof planar robot, and then a 7-dof spatial robot as a practical application to the nozzle dam task in the Nuclear Power Plant.