• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1180-1188
• /
• 2008

As many systems depend on electronics, concern for fault tolerance is growing rapidly in the safety critical system such as intelligent vehicle. In order to make system fault tolerant, there has been a body of research mainly from aerospace field including predictive hybrid redundancy by Lee. Although the predictive hybrid redundancy has the fault tolerant mechanism to satisfy the fault tolerant requirement of safety crucial system such as x-by-wire system, it suffers form the variability of prediction performance according to the input feature of system. As an alternative to the prediction method of predictive hybrid redundancy for robust fault tolerant, Kalman prediction has attracted some attention because of its well-known and often-used with its structure called Kalman hybrid redundancy. In addition, several numerical simulation results are given where the Kalman hybrid redundancy outperforms with predictive smoothing voter.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.11-17
• /
• 1996

In the case of redundancy control performed by a netowrk management system, it can not be ignored some delay of control time and break of control by failure of the system. This paper proposed a new method to improve the performacne of a redundancy control system interfaced to the network management system. At first, it produced the modelling of the total system and analyzed the functional relation of reliability and failure rate for a transmission system having an one-to-one active redundancy structure controlled by itself. After describing the loss rate of transmission data and the time required for the redundancy control process of the network management system when a failure is occurred, it proposed the new redundancy method of complex system control mode as an effective redundancy control method to improve reliability of a redundancy control system. Finally, it proved the effect by comparing the new result to the previous result.

• 대한산업공학회지
• /
• 제39권2호
• /
• pp.90-98
• /
• 2013

The k-out-of-n system with mixed redundancy is defined as k-out-of-n system which both includes warm-standby and cold-standby components. In case that operating components in the system fail and the system needs quick transition of standby components to operation state, the k-out-of-n system with mixed redundancy is useful for decreasing system failure rate and operational cost. Reliability-Redundancy Optimization Problem (RROP) involves selection of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. A solution methodology by using harmony search algorithm for RROP of the k-out-of-n system with mixed redundancy to maximize system reliability was suggested in this study.

• 산업경영시스템학회지
• /
• 제9권14호
• /
• pp.45-48
• /
• 1986

This paper studies reliability growth model in redundancy allocation of Parallel-series system in which several series system is linked parallelly, The model is generalized by system redundancy of sub-system that have components redundancy. The stage of components in each sub-system is established differently. At the same time by assigned the different number of constraints to the sub-system, this paper deals with rather practical reliability growth model.

• 한국통신학회논문지
• /
• 제22권1호
• /
• pp.21-29
• /
• 1997

This paper describes implementation contents contents of manual/automatic complex redundancy control mothod for control of a modulation system of a Paging earth station in redundancy stracture. The existed redundancy control method usually is a automatic local control method in which the redundancy switching, including display or alarm beeping through operation of display devices or audio devices, is performed by the co-action of components or modules when the abnormal status is occurred in a modulation system. However, this method introduced in here is designed to enable use of three control modes;1) Manual mode by an operator, 2) Auto-remote mode by the Network Maagement System, through implementation of the redundancy control system composed of the redundancy control board and the redundancy switching circuit.

• 품질경영학회지
• /
• 제43권1호
• /
• pp.31-42
• /
• 2015

Purpose: System consists of a lot of units with coherent function. In design phase, various units could be considered with the same function. In this study, we consider the alternative units with the same function and redundancy allocation to maximize system reliability in multi level system. Methods: The redundancy allocation problem with the alternative units in multi level system is formulated. Memetic algorithm(MA) is proposed to optimize the redundancy allocation problem. In addition, the performance of the proposed algorithm is explained by a numerical experiment. Results: MA showed better results than genetic algorithm(GA) and the convergence of the solutions in MA was also faster than GA. In addition, we could know from experiment that system reliability is increased and the chosen unit for redundancy allocation is changed if cost limit is increased. Conclusion: The chose unit for redundancy allocation is changed as resource constraints. It means we need to consider the alternative units in system design. In the future, we need to consider various problem related to redundancy allocation in multi level system and develop the better method to enhance search performance.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.413-421
• /
• 2013

Purpose: System availability and life cycle cost are often used to evaluate the system performance and is influenced by the operation and maintenance characteristic. In this paper, we propose the method to improve life cycle cost and satisfy the target availability through redundancy allocation. Methods: We consider the redundancy is available at all items in multi level system. Thus, we assume that sub-assembly, module, components can be duplicated. Simulation and genetic algorithm are employed to optimize redundancy allocation. Results: Target availability is higher, the life cycle cost is increased. In addition, the items for redundancy are selected at higher level in multi level system if target availability is higher. Conclusion: We could know that target availability affects the duplication number of items and the selection of redundancy items. For further study, we will consider new optimization algorithms to compare with the proposed GA algorithm and improve optimization performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.450-455
• /
• 2003

This paper is to discuss the hardware redundancy architecture of fault-tolerance system with using redundancy. Each architecture will be studied to implement fault-tolerance in classifying hardware redundancy architecture as passive, active and hybrid hardware redundancy. Therefore Fault-Masking and Fault-Detecting Techniques in each redundancy architecture is studied.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.240-247
• /
• 1993

The precise prediction of reserved carrying capacity of bridge as a system is extremely difficult especially when the bridges are highly redundant and significantly deteriorated or damaged. This paper is intended to propose a new approach for the evaluation of reserved system carrying capacity of bridges in terms of equivalent system-strength, which may be defined as a bridge system-strength corresponding to the system reliability of the bridge. This can be derived from an inverse process based on the concept of FOSM form of system reliability index. It may be emphasized that this approach is very useful for the evaluation of the deterministic system redundancy and reserve strength which are measured in terms of either probabilistic system redundancy factor and reserve factor or deterministic system redundancy factor and reserve factor. The system reliability of bridges is formulated as a parallel-series model obtained from the FAM(Failure Mode Approach) based on the major failure mechanisms. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed approach and method for the system redundancy and reserve safety/strength are applied to the safety assessment of actual RC and steel box-girder bridges. The results of the evaluation of reserved system safety or bridge system-strength in terms of the system redundancy and the system safety/strength are significantly different from those of element reliability-based or conventional methods.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.76-87
• /
• 2010

According to the new rules and regulations (New SOLAS), major safety critical systems are to be designed to be redundant, which is called 'Redundancy Design'. This paper was to quantitatively analyze the degree of influence of the redundancy design applied to major safety critical systems using IMO's FSA(formal Safety Assessment) method. For the purpose of this study, the diesel engine system, which is actually one of major safety critical systems, was dealt with FMEA, FTA and ETA technique. In addition, whether the redundancy was met or not was verified and the degree of safety, or redundancy, was represented in terms of reliability. In conclusion, the safety of propulsion systems is possibly assessed systematically by estimating the risk level in terms of frequency and fatality.