• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• 태양에너지
• /
• 제19권2호
• /
• pp.37-44
• /
• 1999

Experimental investigation has been carried out to determine drag reducing effects of polymer additives for a plate type heat exchanger(evaporator or condenser) in OTEC power plant applications, where the pressure drop in the heat exchangers takes up $70{\sim}80%$ of the total pumping power in the existing system. The rate of drag reduction was investigated with various polymer concentrations and mass flow rates. Experiments were undertaken for a test section in Alfa-Laval plate heat exchanger utilizing Poly Ethylene Oxide(Mw $5{\times}10^6$) as polymer additives. Concentrations of polymer additives were 5, 10, 20, 30, 40, 50, 100, 200, 400 wppm at $25^{\circ}C$ and mass flow rates were 0.6kg/s, 0.7kg/s, 0.8kg/s and 0.9kg/s in normal operating ranges for a 15kW Alfa-Laval plate heat exchanger. The maximum effects of drag reductions were found at approximately 0.7kg/s of mass flow rate. The results show that there exists the optimum mass flow rate for the plate heat exchanger to obtain maximum drag reductions. Drag reduction of 20% means considerable savings in pumping power for a large size of OTEC plant.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.87-95
• /
• 2000

The changes on shrinkage, dyeability, antimicrobial activities and other physical properties of wool fabrics by chitosan treatment were investigated. A acid dye, a basic dye and natural artemisia were used for dyeing of wool fabrics. For Antimicrobial test of wool fabrics, S.Aureus was used. As the results, The wool fabrics treated with chitosan showed a marked decrease in shrinkage. Dyeability increased slightly as concentration of chitosan treatment increased, Dyeability of acid dye was the highest than other dyes. On the other hand, the dyeability of basic dye on chitosan treated fabrics was lower than untreated fabrics. Reduction rates of colony of chitosan-treated wool fabrics showed from 64.8% to 85.24% as chitosan concentration increased. Reduction rates of colony of the chitosan-treated fabrics decreased by dyeing with acid and basic dye. But increased by retreating with chitosan. Fabrics dyeing with atremisia showed above 90% reduction rate against S.Aureus on all chitosan concentrations. The Tensile properties of chitosan-treated fabrics showed little decrease. The moisture regain and the air permeability was decreased on chitosan concentration on 0.1% but recovered as chitosan concentration increased. The warmth retention was increased a little by chitosan treatment. The drapeability became hard as chitosan concentration increased.

• 한국축산시설환경학회지
• /
• 제20권1호
• /
• pp.15-20
• /
• 2014

The present study was conducted to develop a milk filtering system for decreasing somatic cell count (SCC) in bulk tank milk. The pore sizes of the filter were 0.1, 0.3, 0.4, 0.5 and $0.8{\mu}m$. The rate of SCC reduction of $1^{st}$ grade milk on $0.1{\mu}m$ filter was 76% and significantly higher than other treatments. The rates of SCC reduction for 0.3, 0.4, 0.5 and $0.8{\mu}m$ were 35, 32, 18 and 6.4%, respectively. The effects of the milk filtering system on bacterial count and milk fat content were minimal. The milk flow rates per minute between the filter sizes were similar. But discharge pressures were increased as the pore size of the filter decreased. In conclusion, Considering the rate of SCC reduction, discharge pressure and cost, $0.4{\mu}m$ filter could be recommended.

• 한국컴퓨터정보학회논문지
• /
• 제28권11호
• /
• pp.89-101
• /
• 2023

사이버 공격으로 인한 국가, 기업 등의 피해를 막기 위해 공격자의 접근을 사전에 감지하는 이상 탐지 기술이 꾸준히 연구되어왔다. 외부 혹은 내부에서 침입하는 공격들을 즉각적으로 막기 위해 실행시간의 감축과 오탐지 감소는 필수불가결하다. 본 연구에서는 공격 이벤트의 유형과 빈도가 이상 탐지 정탐률 향상 및 오탐률 감소에 영향을 미칠 것으로 가설을 세우고, 검증을 위해 Los Alamos National Laboratory의 2015년 로그인 로그 데이터셋을 사용하였다. 전처리 된 데이터를 대표적인 이상행위 탐지 알고리즘에 적용한 결과, 공격 이벤트 유형과 빈도를 동시에 적용한 특성을 사용하는 것이 이상행위 탐지의 오탐률과 수행시간을 절감하는데 매우 효과적임을 확인하였다.

• 한국생활과학회:학술대회논문집
• /
• 한국생활과학회 2008년도 하계학술대회
• /
• pp.163-164
• /
• 2008

• The Korean Journal of Ecology
• /
• 제22권2호
• /
• pp.79-83
• /
• 1999

Phytotoxic effects of ozone and ethylenediurea (EDU) on soybean (Glycine max) and spinach (Spinacia oleracea) were observed by using open-top field chamber system (OTC). Gas exchange rates (photosynthesis. stomatal conductance and transpiration rates) of soybean plants were decreased by 20% to 30% by ambient ozone and resulted in 30% reduction of seed yields. In OTC. ambient ozone and 0.12 $\mu$l/l $O_3$ decreased gas exchange rates of spinach by 25% to 40% and by 50%. respectively. The protective effect of EDU against ozone induced injury was obtained at 100 mg/l on soybean. and at 250 mg/l on spinach, respectively. The excessive application of EDU. however. inhibited photosynthesis. transpiration. and stomatal conductance without any specific visible damage.

• 한국환경과학회지
• /
• 제13권1호
• /
• pp.69-77
• /
• 2004

In this study, sulfate reduction reaction was used to increase the decomposition of organics, which is the most critical factor for the stabilization of a landfill site. Composite of sewage sludge, papers, and incineration ashes was used in the column. The experimental results indicated that out of 10 reactors, the reactors 3, 4, 8. and 9 showed higher organics (i.e., TOC) removal rate than that in the absence of sulfate. The organics removal rates (K) in R3 and R9 were 8.65e$\^$-4/d and 3.82e$\^$-4//d, respectively. The times to reach 10％ of initial concentrations in R3 and R9 was 7.3 and 16.5 years, respectively, showing faster organics decomposition rates in these reactors.

• ETRI Journal
• /
• 제32권3호
• /
• pp.447-456
• /
• 2010

Asymmetric regulation as applied to mobile termination rates refers to regulatory arrangements in which different mobile operators charge different termination rates, even though the services provided are essentially identical. The asymmetric regulation has been frequently used as a regulatory tool to support new entrants to a mobile market. This paper examines the economic effects of asymmetric regulation of mobile termination rates using a theoretical model and its simulation. The result shows that when there is no noticeable difference in brand loyalty between mobile operators with the high degree of substitutability between services provided by mobile operators, and the costs of new entrants are low, a reduction in the asymmetry of mobile access prices results in an enhancement of consumer welfare. These findings provide positive evidence for the argument that in certain situations asymmetric pricing of mobile access services may be counterproductive for consumer welfare.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.93-100
• /
• 2004

For accurate construction contract time estimation, few parameters are more significant than crew production rates and factors affecting the rates. However, statistical analysis techniques for finding such factors are not always simple mainly because there are many factors and the interaction between factors is not well quantitatively understood. This paper presents methodology of identifying factors driving crew production rates. The methodology is further demonstrated with representative data collected by the author from 13 on-going highway constructions. Three factors were identified as statistically significant drivers of Cap crew production rate: 'Cap Size (m3/ea)'; 'Cap Length (m)'; and 'Cap Shape (Rectangle vs. Inverted 'T')'. It was also found that the production rates are best explained by a multiple regression model with two of the drivers; 'Cap Size' and 'Cap Shape'.