• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.440-444
• /
• 2005

An increase in the surface area of drugs by reducing particle sizes from microns to nanometers has been known as an efficient method to improve the bioavailability of water-insoluble drugs. To prevent drug nanoparticles from aggregation during the processes of drug formulation, a limited number of pharmaceutical inactive ingredients such as hydroxypropyl cellulose has been employed as stabilizers or dispersants. In this study, copolymers of hydrophilic and hydrophobic amino acids were synthesized by the ring opening polymerization of their N-carboxyanhydride monomers and evaluated as novel candidates to stabilize the nanoparticles of a water insoluble drug, naproxen. Naproxen nanoparticles stabilized by synthesized amino acid copolymers were successfully prepared in the size of $200\~500nm$ in 60 min by a wet comminution process. Particle size analysis showed that the effective stabilization performance of copolymers required the hydrophobic moiety content to be higher than $10 mol\%$. However, the molecular weight and morphology of copolymers was not the critical parameters in determining the particle size reduction. Their particle size was found to be stable up to 14 days without significant aggregation.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.239-250
• /
• 2003

The reliability degradation phenomena in the SiGe hetero-junction bipolar transistor (HBT) are investigated in this review. In the case of the SiGe HBT the decrease of the current gain, the degradation of the AC characteristics, and the offset voltage are frequently observed, which are attributed to the emitter-base reverse bias voltage stress, the transient enhanced diffusion, and the deterioration of the base-collector junction due to the fluctuation in fabrication process, respectively. The reverse-bias stress on the emitter-base junction causes the recombination current to rise, increasing the base current and degrading the current gain, because hot carriers formed by the high electric field at the junction periphery generate charged traps at the silicon-oxide interface and within the oxide region. Because of the enhanced diffusion of the dopants in the intrinsic base induced by the extrinsic base implantation, the shorter distance between the emitter-base junction and the extrinsic base than a critical measure leads to the reduction of the cut-off frequency ($f_t$) of the device. If the energy of the extrinsic base implantation is insufficient, the turn-on voltage of the collector-base junction becomes low, in the result, the offset voltage appears on the current-voltage curve.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.179-187
• /
• 2009

This study develops a real-time signal control algorithm based on sectional travel times and includes a field test and evaluation. The objective function of the signal control algorithm is the equalization of delay of traffic movements, and the main process is calculating dissolved time of the queue and delay using the sectional travel time and detection time of individual vehicles. Then this algorithm calculates the delay variation and a targeted red time and calculates the length of the cycle and phase. A progression factor from the US HCM was applied as a method to consider the effect of coordinating the delay calculation, and this algorithm uses the average delay and detection time of probe vehicles, which were collected during the accumulated cycle for a stabile signal control. As a result of the field test and evaluation through the application of the traffic signal control algorithm on four consecutive intersections at 400m intervals, reduction of delay and an equalization effect of delay against TOD control were confirmed using the standard deviation of delay by traffic movements. This study was conducted to develop a real-time traffic signal control algorithm based on sectional travel time, using general-purpose traffic information detectors. With the current practice of disseminating ubiquitous technology, the aim of this study was a fundamental change of the traffic signal control method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Biomolecules & Therapeutics
• /
• v.14 no.4
• /
• pp.253-258
• /
• 2006

LDD175(4-choloro-7-trifluoromethyl-10H-benzo[4,5]furo[3,2-b]indole-l-carboxylic acid) is one of benzofuroindole derivatives that act as a potent $BK_{Ca}$ channel openers. In the process of testing LDD175 as a new drug candidate, an acute toxicity study was carried out in mice. The mice were administered LDD175 intraperitoneally at dose of 0.2, 1, 10, 50, 100, 200, 400, 800mg/kg and orally at dose of 10, 100, 400, 800mg/kg body weight. After administering LDD175, the vital organs such as the liver, kidney and spleen were carefully observed for any significant pathological features or differences from the norm over a l4-day period. LDD175 did not induce any short-term toxicity at doses less than 100mg/kg. A $LD_{50}$ of LDD175 was 2493mg/kg in male mice and 4908mg/kg in female mice. Weight reduction was observed at a dose of 800mg/kg in male, and 400 and 800mg/kg in female. The kidney weight decreased in females after an intraperitoneal injection of LDD175 high dose(>400mg/kg, i.p.), and the spleen weight increased in the male(800mg/kg, i.p.) and female(400mg/kg, i.p.) mice. Inspite of the change in organ weights, there were neither histopathological changes nor any gross morphological abnormalities detected in any organ. LDD175 did not produce significant changes in the general behavior at doses of <200mg/kg, but decreased locomotor activity was observed at an intraperitoneal dose of 400mg/kg. Its effects on the locomotor activity and activity on the rotarod were tested and compared with the effects of diazepam 5mg/kg. The decrement in the locomotor activity and the activity on the rotarod induced by LDD175 was less serious than it by diazepam.

• Journal of Plant Biotechnology
• /
• v.41 no.4
• /
• pp.216-222
• /
• 2014

This study was carried out to develop an efficient transformation protocol via particle bombardment with PLBs (protocorm-like bodies) in Phalaenopsis. To achieve this aim, osmoticum treatment and an increasing shooting chances in particle bombardment process were applied for this study. In addition, pCAMBIA3301: ORE7 vector which contains a herbicide-resistance bar gene as a selectable marker and ORE7 gene as a gene of interests were employed. With regard to the increasing chances of shooting in particle bombardment, double shooting was the best results with 1.5 ~ 2.5 times higher than those of a single or triple shooting treatment in the productioon of PPT (D-L-phosphinothricin)-resistant PLBs. However, regeneration rate of shoots in double shooting was not high as a single shooting. Further, double shooting showed 35 ~ 40% higher than that of a single shooting in the frequency of browning. Regarding effects of different osmotic treatments, combination of 0.2 M sorbitol with 0.2 M mannitol showed the best results in transformation efficiency, regeneration of transformants and reduction of browning. Putative transgenic Phalaenopsis plants were analyzed by PCR analysis and confirmed the presence of bar and ORE 7 gene. Also, real-time PCR was conducted by using 21 transgenic plants and showed only 4 plants had one copy of transgene; whereas, the other 17 plants had more than 2 copies of transgene. Transgenic phalaenopsis plants produced in this study were transferred to pots and flowered normally without morphological variations in flower and leaf.

• Journal of Plant Biotechnology
• /
• v.41 no.4
• /
• pp.223-228
• /
• 2014

To establish an efficient proliferation and regeneration of PLBs (protocorm-like bodies) of Phalaenopsis plants, a variety of propagation medium types, various concentraions of sucrose as well as liquid and solid type were tested in this study. Further, activated charcoal, citric acid and ascorbic acid were compared whether these agents are suppose to reduce the browning in culture process using PLBs of Phalanopsis plants. With regard to the proper propagation medium, VW medium showed 1.3 ~ 2 times highr than those of other medium in an index of increasing for fresh weight and 50% higher than those of other medium in the frequency of shoot regeneration. However, regarding liquid and solid types of culture, there were no significant differences in the proliferation of PLBs and regeneration of shoots from PLBs. In the experiment for a variety of sucrose concentrations (0 ~ 50 g/l), 10 g of sucrose showed 30 ~ 50% higher than other concentrations in increasing index and 10 ~ 50% higher in the regeneration of shoots from PLBs. Regarding the reduction of browning in tissue culture via PLBs of Phalaenopsis plants, 1 g of activated charcoal showed only 1.5% browning of PLBs cultured. Whereas, other treatments including citric acid and ascorbic acid showed 6 ~ 16% of browning of PLBs. Therefore, activated charcoal was selected as an efficient anti-browning agents for the culture of PLBs in Phalaenopsis plants. Using above-described results can be contibuted to the establishment of mass propagation system using PLBs of Phalaenopsis plants in the future.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.292-296
• /
• 2018

Softening effects of enzyme following pre-treatments were examined. Four pre-treatments: raw (R), heat (H), heat and freeze-thawing (HFT), heat and freeze-drying (HFD) were applied to carrot. Subsequently, each treated sample was immersed in 10% celluclast enzyme solution for up to 6 h and then their properties were compared. The minimum and the maximum color change was observed in HFD and H, respectively. R showed no change in hardness after 6 h immersion, indicating that the enzyme did not penetrate the carrot. The number and size of pores were greater in samples undergone HFT or HFD as observed by microstructure analysis using SEM, and HFD caused 99.5% reduction in hardness after 6 h immersion. After 6 h immersion post-HFT or 3 h immersion post-HFD, the hardness was less than $20,000N/m^2$, indicating tongue ingestion was possible, and the samples retained their original shape and easily collapsed by spoon pressing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3304-3311
• /
• 2014

In the saponification to manufacture plant fatty acid hard soap, the drying process is required for its water evaporation and hardness. This study mixed it with essential oil(E.O) with high volatility instead of adding synthetic flavor. And it comparatively observed the duration of flavor changing to the additive ($TiO_2$) and the drying period of the major flavor component (Linalool, Linalyl acetate) in the essential oil (Lavender E.O) contained in the soap during the soap manufacture by using GC-MS. Advanced researches have mostly dealt with the utility of plant hard soap, and those related with the volatility of flavor have been hardly conducted. Regarding the volatility of linalool contained in the soap, the soap mixed with $TiO_2$ showed a higher reduction ratio up to the 12th week; however, at the point of the 20th week, it reduced to a similar level. Although Linalyl acetate did indicate a slight difference according to the mixture of $TiO_2$, the volatility was shown similar up to the point of the 20th week. During the 20 weeks of drying, the residual rate of linalool was found to be higher than that of Linalyl acetate regardless of the mixture of $TiO_2$. It has been found that the flavor component of lavender essential oil with the duration of two or so days at the room temperature remains for 20 weeks (or 5 months) when it is manufactured through the mixture of plant fatty acid hard soap.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.21-26
• /
• 2016

This paper presents a step-down DC-DC buck converter with a CCM/DCM dual-mode function for the internal power stage of portable electronic device. The proposed converter that is operated with a high frequency of 1 MHz consists of a power stage and a control block. The power stage has a power MOS transistor, inductor, capacitor, and feedback resistors for the control loop. The control part has a pulse width modulation (PWM) block, error amplifier, ramp generator, and oscillator. In this paper, an external capacitor for compensation has been replaced with a multiplier equivalent CMOS circuit for area reduction of integrated circuits. In addition, the circuit includes protection block, such as over voltage protection (OVP), under voltage lock out (UVLO), and thermal shutdown (TSD) block. The proposed circuit was designed and verified using a $0.18{\mu}m$ CMOS process parameter by Cadence Spectra circuit design program. The SPICE simulation results showed a peak efficiency of 94.8 %, a ripple voltage of 3.29 mV ripple, and a 1.8 V output voltage with supply voltages ranging from 2.7 to 3.3 V.