• 한국경영과학회지
• /
• 제21권3호
• /
• pp.47-61
• /
• 1996

An ATM switch must deal with various kinds of input sources having different traffic characteristics and it must guarantee very small value of cel loss probability, about 10$^{8}$ -10$^{12}$ , to deal with loss-sensitive traffics. In order to estimate such a rate event probability with simulation procedure, a variance reduction technique is essential for obtaining an appropriate level of precision with reduced cost. In this paper, we propose a hybrid simulation technique to achieve reduction of variance of cell loss probability estimator, where hybrid means the combination of analytical method and simulation procedure. A discrete time queueing model with multiple input sources and a finite shared buffer is considered, where the arrival process at an input source and a finite shared buffer is considered, where the arrival process at an input source is governed by an Interrupted Bernoulli Process and the service rate is constant. We deal with heterogeneous input sources as well as homogeneous case. The performance of the proposed hybrid simulation estimator is compared with those of the raw simulation estimator and the importance sampling estimator in terms of variance reduction ratios.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.11-15
• /
• 2015

주석을 함유한 폐기물에서 고순도 주석을 회수하는 기술을 개발하기 위해 주석오니의 환원 제련 및 전해정련에 대해 연구하였다. 2단계의 건식제련을 통해 주석오니에 함유된 주석산화물을 환원시켜 92.7%의 주석을 회수하였다. 또한 건식공정으로 회수한 조주석을 전해정련시켜 순도를 99.87%까지 증가시켰다. 본 연구결과는 국내에서 발생하는 폐자원으로부터 주석을 회수하여 국내 주석 소비량의 일부를 대체할 수 있는 상용화기술의 토대가 될 수 있다.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.656-660
• /
• 2002

It was investigated that $Al_2$$O_3$/Cu nanocomposite powder could be optimally prepared by dispersion and reduction of Cu oxide, and suitably consolidated by employing pulse electric current sintering (PECS) process. $\alpha$-$Al_2$$O_3$ and CuO powders were used as elemental powders. In order to obtain $Al_2$O$_3$ embedded by finely and homogeneously dispersed CuO particles, the elemental powders were high energy ball milled at the rotating speed of 900 rpm, with the milling time varying up to 10 h. The milled powders were heat treated at $350^{\circ}C$ in H$_2$ atmosphere for 30 min to reduce CuO into Cu. The reduced powders were subsequently sintered by employing PECS process. The composites sintered at $1250^{\circ}C$ for 5 min showed the relative density of above 98%. The fracture toughness of the $Al_2$$O_3$/Cu nanocomposite was as high as 4.9MPa.$m^{1}$2//, being 1.3 times the value of pure $Al_2$$O_3$ sintered under the same condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.575-578
• /
• 2000

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation for the die wear is too hard because the prediction of the die wear is determined with many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard's wear model in order to reduce the rapid wear rate that is generated for the backward extrusion product exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat, angle, and round of the punch nose part. As the flat and angle of the punch nose are larger, the surface expansion is reduced. and, the wear rate is decreased according to the reduction of the punch round. These results obtained through this study are applied to the real manufacturing process, it is implemented the reduction of the wear rate.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4221-4226
• /
• 2011

Honeycomb-patterned polyvinypyrrolidone (PVP) thin films coated with nanometer-sized silver particles were prepared using honeycomb-patterned polystyrene (PS) template films fabricated by casting a polystyrene solution under humid condition. Silver was first metallized on the patterned PS films via silver nitrate ($AgNO_3$) reduction using tetrathiafulvalene (TTF) and a small amount of PVP as the reductant and dispersing agent, respectively. The effects of $AgNO_3$, TTF, and PVP solution concentrations during the reduction process in acetonitrile were determined to obtain a uniform silver-coated honeycomb-patterned PS film. Second, the silver-metallized patterned porous PS films were filled with high PVP concentration solutions via the spincoating process. Silver-coated patterned PVP films were obtained by peeling off the PVP layer from the template PS film after drying. The results show that the honeycomb-patterned PVP films uniformly coated with silver particles are conveniently obtained using the silver-coated patterned PS template, although the direct fabrication of these films using water droplets under humid conditions was not feasible because of the water solubility of PVP.

• 자원리싸이클링
• /
• 제11권4호
• /
• pp.37-43
• /
• 2002

전기로 분진의 유해성을 제거하고 인공자원으로써의 가치를 활용하기 위하여 연구되고 있는 고온용융법을 이용한 전기로 분진의 처리공정에 있어서 유가금속 특히 아연의 환원 거동에 관한 연구를 속도론적인 측면에서 수행하였다. 전기로 분진의 구성 성분인 ZnO와 Franklinte의 환원 반응이 CO gas의 분압에 대하여 1차 반응인 chemical reaction에 의해 지배를 받음을 확인 할 수 있었다. ZnO와 Franklinite의 CO 가스에 의한 환원 반응에 있어서 활성화 에너지는 각각 44.95 kcal/mol, 4.9546 kcal/mol로 나타나 화학반응 단계가 전체 반응의 율속 단계임을 알 수 있었다.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.136-141
• /
• 2010

Bismuth-telluride based $(Bi_{0.2}Sb_{0.8})_2Te_3$ thermoelectric powders were fabricated by two-step planetary milling process which produces bimodal size distribution ranging $400\;nm\;{\sim}\;2\;{\mu}m$. The powders were reduced in hydrogen atmosphere to minimize oxygen contents which cause degradation of thermoelectric performance by decreasing electrical conductivity. Oxygen contents were decreased from 0.48% to 0.25% by the reduction process. In this study, both the as-synthesized and the reduced powders were consolidated by the spark plasma sintering process at $350^{\circ}C$ for 10 min at the heating rate of $100^{\circ}C/min$ and then their thermoelectric properties were investigated. The sintered samples using the reduced p-type thermoelectric powders show 15% lower specific electrical resistivity ($0.8\;m{\Omega}{\cdot}cm$) than those of the as-synthesized powders while Seebeck coefficient and thermal conductivity do not change a lot. The results confirmed that ZT value of thermoelectric performance at room temperature was improved by 15% due to high electric conductivity caused by the controlled oxygen contents present at bismuth telluride materials.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.304-310
• /
• 1998

Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.193-197
• /
• 2020

Porous Cu-14 wt% Co with aligned pores is produced by a freeze drying and sintering process. Unidirectional freezing of camphene slurry with CuO-Co₃O₄ powders is conducted, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The dried bodies are hydrogen-reduced at 500℃ and sintered at 800℃ for 1 h. The reduction behavior of the CuO-Co₃O₄ powder mixture is analyzed using a temperature-programmed reduction method in an Ar-10% H₂ atmosphere. The sintered bodies show large and aligned parallel pores in the camphene growth direction. In addition, small pores are distributed around the internal walls of the large pores. The size and fraction of the pores decrease as the amount of solid powder added to the slurry increases. The change in pore characteristics according to the amount of the mixed powder is interpreted to be due to the rearrangement and accumulation behavior of the solid particles in the freezing process of the slurry.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권6호
• /
• pp.635-642
• /
• 2000

본 논문에서는 이동 단말에 적응적으로 웹 문서를 제공할 수 있는 효율적인 문서 변환 방법과 적응적 태그 단순화(tag reduction)를 수행하기 위한 RHTML(Reduced HTML)을 제안하였다. 제안한 적응적 문서 변환 방법은 마크업(markup) 오류 제거 과정을 통해 HTML(HyperText Markup Language) 문서를 XML(Extensible Markup Language)의 응용 문서로 변환한다. 이를 통해 웹 문서는 DOM(Document Object Model)을 사용하여 트리 구조로 손쉽게 다루어질 수 있게 되며, 따라서 이동 단말에서 마크업 오류를 수정하는 하드웨어의 부하를 제거할 수 있다. 또한 제안한 문서를 단순화하는 과정에서는 RHTML에 정의 된 3가지의 DTD(Document Type Definition)중 하나를 참고하여 이동 단말에 적응적으로 웹문서를 제공한다.