• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.725-732
• /
• 2014

The silencer for the medium caliber gun was studied to reduce the propagation of gun-generated noise from the firing test range to the community. Three types of silencer were made to compare the reduction of sound pressure level and the effect of chamber volume and the exit angle to the reduction of sound pressure was considered. The structural analysis and measurement of pressure in the silencer showed that the structure is safe in terms of strength. The increase of recoil force to buffer must be considered in the development of silencer. The hypothesis test on the muzzle velocity for the existence of silencer showed that there are no difference at the significance level of 0.05.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1643-1647
• /
• 2000

The intake noise of an automobile induced by firing of an engine accompanies acoustic resonances of ducts of an intake system. Conventionally, the adoption of the Helmholtz type resonator was one of possible ways to eliminate the booming noise due to acoustic resonances of air ducts. Although the Helmholtz type resonator is convenient to attenuate the intake noise of an automobile, the usage of the Helmholtz type resonator requires cost increase or big engine room space. Therefore, reduction of the number of the resonators or the volume of the resonators is essential to increase the value of an automobile. To meet these requirements, other types of resonator are suggested instead of the Helmholtz type resonator. The effectiveness of the suggested resonators is compared considering noise reduction ability, effect to the engine performance and size of each resonator.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.700-709
• /
• 2011

In this paper, we propose a novel method which can detect ordnance firing events in IR images. The proposed algorithm is comprised of effective target detection and robust clutter rejection methods based on the temporalspatial cooperative filter. And additional clutter reduction is performed based on the proposed two features, NTFF (Number of Temporal Filter Frames) and SNS(Size-Normalized Signal). Experimental results show the effectiveness and feasibilities of our proposed algorithm.

• 한국군사과학기술학회지
• /
• 제19권4호
• /
• pp.453-461
• /
• 2016

The paper represents the experimental analysis of the shock noise of medium caliber guns when a projectile is passed through the shielding material. In the study, the shielding material was constructed and tested in three separate experiments. The shielding material was not installed for medium caliber gun in Case 1. A medium caliber gun was fully covered with shielding material in Case 2, and another one was put with shielding material near muzzle in Case 3. In each experiment, the experimental data was compared with each other. Results showed the firing shielding material achieved a significant noise reduction in $90^{\circ}$ to the noise source. Case 3 is confirmed to be better effective than Case 2 in the near field. But, the noise reduction in the far field is small in quantity due to the low frequency. The paper is considered that further study is necessary for the shielding material which can absorb a low frequency noise in the future.

• 보존과학회지
• /
• 제36권5호
• /
• pp.393-404
• /
• 2020

본 연구는 도자기 유약 내 철산화물의 함량에 따라 유약층에서 나타나는 미세조직적 특성변화의 비교분석을 통해 과거 흑유자기들의 제작 과정에서 사용된 재료의 성분 함량과 제작 방법을 유추해보고자 하였다. 먼저 산화철과 장석, 석회석, 참나무재의 성분비를 달리한 유약을 사용하여 온도와 소성조건을 달리한 재현시편을 제작하였고, 색차와 단면관찰, 성분분석, 결정구조분석을 통해 발현 특성을 알아내고자 하였다. 분석 결과 산화조건에서는 유약의 특성이 5개 그룹으로 분류된 것을 관찰할 수 있었으며, 1200℃ 이상의 환원환경에서는 각자 다른 양상의 유약 특성을 확인하였다. 실험을 통해 확인한 결정형태는 출토 흑유자기에서 나타나는 유약특성과 유사한 것을 확인하였다. 철 산화물의 농도 변화에 따라서도 산화조건에서는 결정상이 띠모양, 원형, 수지상, 침상 등 4개의 그룹으로 나타났으나, 고온에서는 결정의 차이가 크게 나타나지 않았다. 또한 성분비에 따라서 유약의 결정상이 2개의 그룹으로 나뉘었다. 이는 장석의 유무가 결정성과 무정형의 철산화물을 만드는데 영향을 주는 것으로 판단되며, 이들의 양에 따라서도 단면에서 나타나는 변화 양상이 극명하게 달라졌다. 특히 산화조건과 환원환경에서 나타나는 철산화물의 조직 양상이 다르게 나타나는 것으로 보아 소성조건으로 인한 결정상 또한 광학적으로 나타나는 발색특성에 영향을 미치는 것을 확인할 수 있었다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.437-442
• /
• 2019

Green $BaSi_2O_2N_2:0.02Eu^{2+}$ phosphor is synthesized through a two-step solid state reaction method. The first firing is for crystallization, and the second firing is for reduction of $Eu^{3+}$ into $Eu^{2+}$ and growth of crystal grains. By thermal analysis, the three-time endothermic reaction is confirmed: pyrolysis reaction of $BaCO_3$ at $900^{\circ}C$ and phase transitions at $1,300^{\circ}C$ and $1,400^{\circ}C$. By structural analysis, it is confirmed that single phase [$BaSi_2O_2N_2$] is obtained with Cmcm space group of orthorhombic structure. After the first firing the morphology is rod-like type and, after the second firing, the morphology becomes round. Our phosphor shows a green emission with a peak position of 495 nm and a peak width of 32 nm due to the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ion. An LED package (chip size $5.6{\times}3.0mm$) is fabricated with a mixture of our green $BaSi_2O_2N_2$, and yellow $Y_3Al_5O_{12}$ and red $Sr_2Si_5N_8$ phosphors. The color rendering index (90) is higher than that of the mixture without our green phosphor (82), which indicates that this is an excellent green candidate for white LEDs with a deluxe color rendering index.

• 공업화학
• /
• 제31권6호
• /
• pp.646-652
• /
• 2020

본 연구는 200~500 ℃ 영역에서 NOx를 제어하기 위한 NH3-SCR 실험을 수행하였다. V/Sb/TiO2 조성의 촉매에서 Sb/TiO2의 소성온도를 다르게 하여 반응활성 실험을 진행하였다. 그 결과 Sb/TiO2의 소성온도가 600 ℃일 때, 가장 효율이 우수하였으며, 특히 반응온도 250 ℃에서 NOx 전환율이 80% 가까이 나오는 것을 확인할 수 있었다. 이와 같이 다른 소성온도로 제조하였을 때 활성증진의 원인을 도출하기 위하여 H2-TPR, XRD, BET, Raman, XPS 분석을 진행하였다. 그 결과 활성이 우수하였던 Sb/TiO2의 소성온도를 600 ℃로 제조하였을 때, VSbO4가 생성되는 것을 확인하였으며, 이 종이 생성됨으로써 V의 비 화학양론종이 증가하여 V/Sb/TiO2의 NOx 전환율이 우수한 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1464-1472
• /
• 1999

Design and operation of $1MW_{th}$ pulverized coal combustion testing facility are described. Also the influence of air staging on NOx emission and burnout of coal flames was investigated in this facility. The test facility consisted of coal feeding system, firing system and flue gas treatment system. A top-fired externally air staging burner was adopted in order to avoid influence of gravity on the coal particles and for easy maintenance. Distribution of temperature and chemical species concentration of coal flames could be measured in vertical pass of furnace. Main fuel was pulverized (83.4% less than $80{\mu}m$) Australian high bituminous coal. From variety of test conditions, overall excess air ratio was selected at 1.2(20% excess air). Tho study showed that increasing the staged air resulted in lower NOx omission, and it was suggested to be more than 40% of the total combustion air for the substantial NOx reduction. Sufficient burnout was not achievable when NOx emission was less than 500ppm. Also, the amount of core air did not influence tho NOx reduction.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.45-50
• /
• 2013

This paper focuses on the fundamental issues for improving the efficiency and throughput of the AC PDP (Plasma Display Panel) manufacturing. The properties of the MgO protective layer affect the PDP efficiency. Especially, the secondary electron emission efficiency was affected on the deposition rate of MgO during the evaporation. In this study, the deposition rate of 5 $\AA$/s has given the maximum efficiency value of 0.05 It is demonstrated that the impurity gases such as $H_2O$, $CO_2$, CO or $N_2$, and $O_2$ can be remained inside the PDP panel before sealing and the amount of the impurity gases decreased rapidly as the base vacuum level increased, especially near $10^{-5}$ torr. The fundamental solution in order to overcome these problems is the vacuum in-line sealing process from the MgO evaporation to the final sealing of the panel without breaking the vacuum. We have demonstrated this fundamental process technology and shown the feasibility. The firing voltage was reduced down to 285 V at the base vacuum value of $10^{-6}$ torr, whreras it was about 328 V at the base vacuum value of $10^{-3}$ torr.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.431-439
• /
• 1999

Among the variable-speed AC motor drive systems, the static slip power recovery system has been widely adopted in large power drives because a high efficiency drive can be obtained by recovering the slip power to the AC line. Although many improvements have been made in this system, several problems also remain such as the need of transformer in inverter AC side, which results in limiting speed control range and increasing the losses, production of reactive power by the control of inverter firing angle, harmonics in line currents, and so on. This paper presents the novel high performance slip power recovery system using the boost converter and small size filter in the rotor circuit, which recovers slip power of a wound rotor induction machine to AC supply efficiently with the aid of the boost converter, in which most of the problems in conventional system can be solved. The speed can be controlled by the duty ratio of the converter switch, not by inverter firing angle. As a results, the proposed system can operate in high power factor and the harmonic currents caused by the inverter and rectifier can be considerably suppressed. The validity of the proposed system verified by demonstrating the good agreement in the simulation and experimental results.