• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.676-682
• /
• 2008

In this study a guideline of the 3D-fit pattern for the ECG(electrocardiogram) measurement of elderly's u-healthcare clothes was proposed. In the screening test of the ECG measurement band, ECG peak band was observable at the band pressure of 0.20 kPa. By employing a 3D body image, tight-fit 3D patterns were made at two different reduction rates of 21%(pattern 1) and 33%(pattern 2), and corresponding pressure of both of the clothes were 0.25 kPa and 0.54 kPa, respectively. Typical waves of ECG were found in both stationary and moving position. In terms of the subjective evaluation of the u-healthcare clothes when worn, it was confirmed that reduction pattern 1(0.25 kPa) conveyed comfortable clothing pressure and pleasantness, which is very close to the result of screening test of ECG band experiment. As results, it is recommended that reduction rate should be adjusted, so that clothing pressure is about 0.2 kPa for the elderly's comfortable and efficient u-healthcare clothes.

• 한국연소학회지
• /
• 제4권2호
• /
• pp.11-22
• /
• 1999

Combustion characteristics of the wood chips(balsa chips) were experimentally investigated with respect to the thermal recycle system of the urban waste. The urban waste contains plastics, vegetable and wood materials. Wood was chosen as an example of the one of the component of urban dust. A small wood chip was burned in a electric furnace by the micro-electric balance. The mass reduction rate was normalized by the initial mass of test piece and the time of volatile combustion end. When the mass of the wood chips(balsa chips) was larger than 0.5g, the combustion similarity was found on the normalized mass reduction rate.

• 보건행정학회지
• /
• 제3권1호
• /
• pp.102-123
• /
• 1993

This study investigates effcts of HMO internal structural arrangements on performance, specially cost reduction measured by hospitalization rate. This study formulates formalization, centralization measured by decision-making participation, differentiation, and coordination as structural factors, considering coordination as an intermediate factor between the rest of structural factors and hospitalization rate. The commonly used HMO types is assumed not effective in explaining performance differences. For the empirical test, I use bootstrap regression analyses with 48 HMOs. The results of the analyses show that HMO types fail to explain differences in hospitalization rate. However, dicision-making participation and differention effectively reduce hospiatalization rate, while frmalization increases hospitalization rate and coordination has nonessential effect on hospitalization rate. And, formalization and decision-making participation positively contribute to achieve coordination in HMO. These findings suggest that the theoretical framework derived from rational-citingency theory of formal organization better explains performance differences of HMOs than HMO types.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.455-462
• /
• 2002

There exist several kinds of continuous consolidation tests to analyze the consolidation behavior of soft clay. The constant rate of strain (CRS) test has been adopted as a standard method by several countries, and some researches also have been peformed by domestic researchers. Among those, the constant pressure ratio (CPR) test is peformed with the constant ratio of excess porewater pressure to vertical effective stress. The test has the advantage of considerable reduction of duration time. In the study, the consolidation characteristics are analyzed by performing the CPR test as validate the pressure ratio with undisturbed soft clay and remolded clay, Also, results of the standard consolidation test and CRS test are compared to verify the CPR test can be employed for practical use. As a result, effects of variation of the pressure ratio on consolidation parameter are similar to the strain rate in the CRS test. Therefore, the test can be used to analyze the consolidation behavior of soft clay But the test have some problems such as expensive cost of equipment and highly skilled workmanship.

• 치위생과학회지
• /
• 제17권3호
• /
• pp.267-274
• /
• 2017

This study aimed to compare the effectiveness of chewable toothbrush and manual toothbrush and provide basic data for recommendation of the chewable toothbrush in specific groups and situations. A total of 20 subjects participated in this study (rolling method, 10; non-rolling method, 10). After professional prophylaxis, participants used the manual toothbrush to brush their teeth for 3 minutes. After a 7-day wash-out period, participants used the chewable toothbrush according to the manufacturer's instructions. Pre- and post-plaque indexing of the teeth was performed. The dental plaque index was assessed using the Turesky Modification of the Quigley-Hein Plaque Index (TMQHPI) for amount of plaque and Silness-Loe Plaque Index (SLPI) for plaque thickness. The difference between pre- and post-dental plaque index was analyzed using a paired t-test and the Wilcoxon signed-rank test. The Mann-Whitney U test was also used to compare the dental plaque index reduction rates. The dental plaque index differed significantly between the chewable toothbrush and the manual toothbrush. The TMQHPI reduction rate was significantly different between the rolling and non-rolling method groups for the manual toothbrush but not the chewable toothbrush. The difference in SLPI reduction rate between the rolling and non-rolling method groups was significant for the manual toothbrush but not for the chewable toothbrush. Differences in the dental plaque index reduction rates between the chewable and manual toothbrushes were not significant in the non-rolling method group. The results of this study showed higher reduction rates in dental plaque with manual toothbrush use than with chewable toothbrush use. However, the non-rolling method group did not show statistically significant differences according to toothbrush type. The present study showed that a chewable toothbrush can be an alternative to a manual toothbrush for individuals who have difficulty using the generally recommended rolling method.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권2호
• /
• pp.16-24
• /
• 2014

To test the potential effects of extracellular electron shuttles (EES) on the rate and extent of heavy metal release from contaminated soils during microbial iron reduction, we created anaerobic batch systems with anthraquinone-2,6-disulfonate (AQDS) as a surrogate of EES, and with contaminated soils as mixed iron (hydr)oxides and microbial sources. Two types of soils were tested: Zn-contaminated soil A and As/Pb-contaminated soil B. In soil A, the rate of iron reduction was fastest in the presence of AQDS and > 3500 mg/L of total Fe(II) was produced within 2 d. This suggests that indigenous microorganisms can utilize AQDS as EES to stimulate iron reduction. In the incubations with soil B, the rate and extent of iron reduction did not increase in the presence of AQDS likely because of the low pH (< 5.5). In addition, less than 2000 mg/L of total Fe(II) was produced in soil B within 52 d suggesting that iron reduction by subsurface microorganisms in soil B was not as effective as that in soil A. Relatively high amount of As (~500 mg/L) was released to the aqueous phase during microbial iron reduction in soil B. The release of As might be due to the reduction of As-associated iron (hydr)oxides and/or direct enzymatic reduction of As(V) to As(III) by As-reducing microorganisms. However, given that Pb in liquid phase was < 0.3 mg/L for the entire experiment, the microbial reduction As(V) to As(III) by As-reducing microorganisms has most likely occurred in this system. This study suggests that heavy metal release from contaminated soils can be strongly controlled by subsurface microorganisms, soil pH, presence of EES, and/or nature of heavy metals.

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.672-678
• /
• 2020

국내에서 생산중인 대구경 탄약은 대부분 Ogive 부를 제조하는 방법으로 Press Nosing 공법을 적용하고 있다. Press Nosing 공법은 프레스 공정 전 후 윤활처리 등의 추가적인 공정이 필요한 단점이 있다. 본 연구에서는 이러한 단점을 개선할 수 있는 점진성형 공법 중 하나인 Swaging 공법의 대구경 탄약 적용 가능성을 제시하고자 하였다. 대구경 탄약인 155MM K307 탄체는 Press Nosing 공정을 적용하는 대표적인 제품으로, 본 연구에서는 K307 탄체의 Sub-scale 시험품을 제작하여 Swaging 공정을 적용한 소성가공 실험을 실시하였다. 최종 성형 치수를 만족하는 단면감소율 75 % 까지 소성가공이 가능한지 여부 및 Swaging 성형으로 제작된 제품의 치수만족 여부, 제품 결함 발생 여부, 단면감소율에 따른 경도 변화, 두께의 증가 등을 고찰하였다. 시험을 통해 단면적 감소율에 따라 비례적으로 경도가 증가하여 단면적 감소율 75 %에서 경도는 HV 335 이상 증가하는 것을 확인하였다. 소재두께 변화량은 이론적 계산값과 유사한 경향을 보였으며 단면 감소율 75 %에서 두께 증가율은 65.4 %로 비례함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2010

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.241-244
• /
• 1999

The purpose of this study is to examine the characteristics of stress corrosion cracking(SCC) and acoustic emission(AE) signals for the weld HAZ of HT-60 steel under corrosion control in synthetic seawater. Corrosive environment was controlled by potentiostat, and SCC experiment was conducted using a slow strain rate test method at strain rate of 10$^{-5}$ /sec. In order to verify the miroscopic fracture behaviour of the weldment during SCC phenomena, AE test was done simultaneously. Besides, correlationship between mechanical parameters and AE ones was investigated. In case of the parent, reduction of area(ROA) at -0.5V was samller than any other applied voltage such as -0.8V and -1.1V. In addition, reduction of area for the PWHT specimens at -0.8mV was larger than that of the weldment due to the softening effect according to PWHT. In case of the weldment, a lots of events was produced because of the singularities of the weld HAZ compared with the parent.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1616-1623
• /
• 2001

A basic experimental study has been carried out to find out the design parameters of fuel 2-staging atomizers in order to reduce nitrogen oxides(NOx) rate emitted from the steam boilers used the liquid fuel. The heavy fuel oil(B-Coil) and fuel 2-staging Y-jet twin-fluid atomizers were adopted in this study. The results of this paper were obtained from the real as well as the model scale atomizers. In the case of model atomizers test, NOx reduction rate was strongly dependent on the staged fuel rate, but it was weakly dependent on the injection hole arrangement and air swirl conditions. The real scale atomizers was designed and manufactured on the base of these test results, and those was mounted and operated in the real boiler generates 185 ton steam per an hour. The reduction rate of the model and real plant was reached 10∼30% of base NOx by atomizers. but dust was sharply increased in the low O$_2$combustion region of the real plant.