• Journal of Pharmaceutical Investigation
• /
• 제22권3호spc1호
• /
• pp.65-76
• /
• 1992

The superoxide dismutase (SOD)-mimetic activities of copper complexes of a series of salicylic acid (SA) analogs were tested and compared to the activity of bovine erythrocyte SOD using ferricytochrome c reduction assay. Stability constants of copper complexes were measured potentiometrically using SCOGS2 program. In the presence of 10 g/l albumin, all the copper complexes lost their SOD mimetic activities. Multiple regression analysis was employed for the statistical comparisons between the SOD mimetic activity and their physicochemical properties. Correlation exists for the SOD mimetic activity and steric parameter $(E_s)$ and/or electronic parameter $({\Sigma}{\sigma})$ in xanthine/xanthine oxidase (XOD) system, demonstrating that E, plays a key role in SOD activity whereas ${\Sigma}{\sigma}$ influences it to a lesser extent. The protective effect of copper complexes against membrane damage was measured by counting D-glucose released frm $EG_s$. D-glucose and XOD were entrapped within $EG_s$ and acetaldehyde was used as a substrate for XOD. In this membrane model system using $EG_s$, hydrophobic parameter $({\Sigma}{\pi})$ is of most importance, producing parabolic equation while $E_s$, and ${\Sigma}{\sigma}$ appear to playa minor role in protection against D-glucose release. In summary, to design an efficient SOD mimetic, stability, steric factor, lipophilicity and redox potential should be considered.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.152-157
• /
• 2021

The pseudocapacitor has a high energy density characteristic because it accumulates charges through a paradic redox reaction. However, due to its strong insulation properties, metal hydroxides should be designed as structural systems optimized for charge transfer to support fast electron transport. Also, Nickel material is weak to heat and is easily deformed when used as a cathode material, so stability must be secured. In this study, nickel hydroxide was produced by electrodeposition to secure the stability of nickel. Electrodeposition is a synthetic method suitable for growing optimized nickel hydroxide because it allows fine control. Nickel hydroxide (Ni(OH)₂) is a metal hydroxide used as a pseudocapacitor anode due to its high capacitance, electrical conductivity and resistance. Therefore, in order to determine how Ni(OH)₂ nanosheets are formed and what are the optimization conditions, various measurement methods were used to focus on structural growth of nanosheets produced by electrodeposition.

• 한국결정성장학회지
• /
• 제29권4호
• /
• pp.160-166
• /
• 2019

산화세륨($CeO_2$)는 고체산화물연료전지, 자동차 삼원 촉매, 산소 캐패시터 소재 등의 고온환경에서 구동되는 촉매 응용분야에 널리 활용되고 있으며 중요한 희토류 산화물 중에 하나이다. 고온 환경에서 $CeO_2$의 우수한 촉매 활성을 유지하기 위하여 초기 합성단계에서 높은 비표면적을 갖는 미세구조제어 연구와 나노 미세구조가 고온 열 사이클과 산화-환원 사이클 변화에서 안정하도록 하는 연구가 필요하여 많은 연구가 진행되고 있다. 따라서 본 연구에서는 탄산염 침전법의 전구체 결정화 단계에서의 이방성을 정밀 제어하여 고 비표면적의 flower-like $CeO_2$를 성공적으로 합성할 수 있었다. 또한, 서로 다른 탄산염이온 침전제의 침전 반응 경로 제어를 통한 침전 수화물 전구체의 이방적 결정 특성으로부터 최종 고 비표면적 $CeO_2$ 산화물의 미세구조 제어와 고온 안정 제어를 확인하고 특성을 평가하였다.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.1076-1081
• /
• 2012

라텍스 개질 콘크리트의 혼화용 라텍스를 개발할 목적으로 carboxylated styrene butadiene 라텍스를 이단계 유화중합법으로 제조하고 콘크리트에 적용하는 실험을 수행하였다. 음이온 유화제로는 sodium dodecylbenzene sulfonate와 sodium salt of lauryl sulfate를 선정하였고, 라텍스 안정제로는 nonylphenoxy poly(ethyleneoxy) ethanol 계열의 동족체들(n=10, 20, 40)을, 그리고 potassium persulfate와 sodium bisulfite를 redox 개시제로, $Na_2HPO_4$와 $K_2CO_3$를 전해질로 각각 사용하였다. 중합안정성에 대한 음이온 유화제의 종류와 사용량의 영향 및 입자크기의 전해질 농도 의존성을 실험적으로 고찰하여 LMC용 라텍스 제조에 적합한 중합처방을 제시하였다. 이 중합처방으로 제조한 라텍스의 LMC 용도에 대한 적용성을 시험한 결과, 슬럼프와 공기량은 한국도로공사의 품질기준을 충족하며, 역학적 물성시험 결과에서는 28일간 경화시킨 시편의 압축강도와 휨강도가 품질기준보다 각각 39.6, 87.3% 더 높은 증진효과가 발현됨을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.423-423
• /
• 2011

Zinc oxide is metal oxide semiconductor with the 3.37 eV bandgap energy. Zinc oxide is very attractive materials for many application fields. Zinc Oxide has many advantages such as high conductivity and good transmittance in visible region. Also it is cheaper than other semiconductor materials such as indium tin oxide (ITO). Therefore, ZnO is alternative material for ITO. ZnO is attracting attention for its application to transparent conductive oxide (TCO) films, surface acoustic wave (SAW), films bulk acoustic resonator (FBAR), piezoelectric materials, gas-sensing, solar cells and photocatalyst. In this study, we synthesized ZnO nanoparticles and defined their physical and chemical properties. Also we studied about the application of ZnO nanoparticles as a photocatalyst and try to find a enhancement photocatalytic activity of ZnO nanorticles.. We synthesized ZnO nanoparticles using spray-pyrolysis method and defined the physical and optical properties of ZnO nanoparticles in experiment I. When the ZnO are exposed to UV light, reduction and oxidation (REDOX) reaction will occur on the ZnO surface and generate O2- and OH radicals. These powerful oxidizing agents are proven to be effective in decomposition of the harmful organic materials and convert them into CO2 and H2O. Therefore, we investigated that the photocatalytic activity was increased through the surface modification of synthesized ZnO nanoparticles. In experiment II, we studied on the stability of ZnO nanoparticles in water. It is well known that ZnO is unstable in water in comparison with TiO2. Zn(OH)2 was formed at the ZnO surface and ZnO become inactive as a photocatalyst when ZnO is present in the solution. Therefore, we prepared synthesized ZnO nanoparticles that were immersed in the water and dried in the oven. After that, we measured photocatalytic activities of prepared samples and find the cause of their photocatalytic activity changes.

• Corrosion Science and Technology
• /
• 제3권5호
• /
• pp.198-208
• /
• 2004

Although there has been no general agreement on the mechanism of primary water stress corrosion cracking (PWSCC) as one of major degradation modes of Ni-base alloys in pressurized water reactors (PWR's), common postulation derived from previous studies is that the damage to the alloy substrate can be related to mass transport characteristics and/or repair properties of overlaid oxide film. Recently, it was shown that the oxide film structure and PWSCC initiation time as well as crack growth rate were systematically varied as a function of dissolved hydrogen concentration in high temperature water, supporting the postulation. In order to understand how the oxide film composition can vary with water chemistry, this study was conducted to characterize oxide films on Alloy 600 by an in-situ Raman spectroscopy. Based on both experimental and thermodynamic prediction results, Ni/NiO thermodynamic equilibrium condition was defined as a function of electrochemical potential and temperature. The results agree well with Attanasio et al.'s data by contact electrical resistance measurements. The anomalously high PWSCC growth rate consistently observed in the vicinity of Ni/NiO equilibrium is then attributed to weak thermodynamic stability of NiO. Redox-induced phase transition between Ni metal and NiO may undermine the integrity of NiO and enhance presumably the percolation of oxidizing environment through the oxide film, especially along grain boundaries. The redox-induced grain boundary oxide degradation mechanism has been postulated and will be tested by using the in-situ Raman facility.

• 한국진공학회지
• /
• 제7권4호
• /
• pp.306-313
• /
• 1998

전기적 착색 텅스텐산화물 박막이 전자비임 증착법에 의해 제작되었다. 전자비임에 의한 막의 퇴화에 미치는 영향이 논의되었다. 진공도 $10^{-4}$mbar에서 제작된 막이 사이클 내 구성 시험에 의한 결과, 가장 안정하였다. 황산 수용액에서 막의 퇴화는 진공도에 의존함을 보였다. 막두께는 산화와 환원전류 그리고 광학적 특성에 큰 영향을 미쳤다. 박막들 중에서 두께 5,000$\AA$의 시료가 사이클에 의한 내구성이 가정 안정하였다. 착색과 탈색이 반복되는 동안에 막의 퇴화의 근원은 막속에 이온의 누적 때문이며, 이로인해 산화와 환원전류가 감 소하였다. 티타늄의 양이 약10~15mol% 함유된 텅스텐산화물 박막은 착색과 탈색사이클이 반복되는 동안 최소한의 퇴화가 일어나서 가정 안정하였다. 사이클이 반복되는 동안 최소한 의 막 퇴화의 주 원인은 막속에 리튬이온의 포획위치 개수의 감소에 있었으며 이로인해 막 의 내구성이 증가하였다.

• 한국축산식품학회지
• /
• 제23권4호
• /
• pp.361-375
• /
• 2003

In this study, significant factors influencing on the quality and stability of fermented sausage, such as materials, processing conditions, and microbiological characteristics as well as topography during ripening, were documented. Since most fermented sausages are not heated during manufacture or before consumption, a strict control of the growth of pathogens and the selection of favourable conditions that encourage the specific growth and development of desirable microflora are particularly important. With respect to microbiological safety, hurdles, i.e., preservations(nitrite), redox potential, competitive flora, acidity(pH), and water activity($a_{w}$) are matters of importance to prevent proliferation of bacterial pathogens. Today, for ensuring the safety and quality of the final product, the application of starter cultures in combination with the proper processing is subsequently used in practice. For improving the efficiency of microbiological utility in the production of fermented sausages, the understanding of their topography is essential. The documented different points must be taken into account when HACCP systems set up for the manufacture of fermented sausages. There are continuous researches concerning desirable improvements to sausage fermentation with health enhancing properties.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.212-217
• /
• 1998

The electrochemistry and valence tautomerism of CoⅢ(N-N)(SQ)(Cat), [N-N=N,N,N',N'-tetramethylethylenediamine (TMEDA); SQ=3,5- or 3,6-di-tert-butyl-semiquinone, Cat=3,5- or 3,6-di-tert-butyl-catechol], have been investigated by spectroscopic, electrochemical, spectroelectrochemical methods in nonaqueous solvents under anaerobic condition. The transition temperature between tautomers is dependent upon the donation effect of substituted quinone ligand and solvent. It increases with the increase of donation effect of solvent and quinone ligand. CoⅢ(TMEDA)(SQ)(Cat) is reduced to [CoⅡ(TMEDA)(SQ)(Cat)]-, and then reduces to [CoⅡ(TMEDA)(Cat)2]2-. CoⅢ(TMEDA)(SQ)(Cat) is oxidized to [CoⅢ(TMEDA)(SQ)2]+, but the stability of the oxidized form in DMF is dependent upon the solution temperature. With the increase of solution temperatrue the oxidized form may be converted to [CoⅡ(TMEDA)(SQ)(BQ)]+ by intramolecular electron transfer from SQ ligand to CoⅢ.

• 센서학회지
• /
• 제30권2호
• /
• pp.71-75
• /
• 2021

Recently, transition-metal-based hydroxide materials have attracted significant attention in various electrochemical applications owing to their low cost, high stability, and versatility in composition and morphology. Among these applications, transition-metal-based hydroxides have exhibited significant potential in supercapacitors owing to their multiple redox states that can considerably enhance the supercapacitance performance. In this study, nanostructured Ni-Mn double hydroxide is directly grown on a conductive substrate using an electrodeposition method. Ni-Mn double hydroxide exhibits excellent electrochemical charge-storage properties in a 1 M KOH electrolyte, such as a specific capacitance of 1364 Fg-1 at a current density of 1 mAcm-2 and a capacitance retention of 94% over 3000 charge-discharge cycles at a current density of 10 mAcm-2. The present work demonstrates a scalable, time-saving, and cost-effective approach for the preparation of Ni-Mn double hydroxide with potential application in high-charge-storage kinetics, which can also be extended for other transition-metal-based double hydroxides.