• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.130-131
• /
• 2013

Nanostructured oxides are widely used in heterogeneous catalysis where their catalytic properties are closely associated with the size and morphology at nanometer level. The effect of particle size has been well decumented in the past two decades, but the shape of the nanoparticles has rarely been concerned. Here we illustrate that the redox and acidic-basic properties of oxides are largely dependent on their shapes by taking $Co_3O_4$, $Fe_2O_3$, $CeO_2$ and $La_2O_3$ nanorods as typical examples. The catalytic activities of these rod-shaped oxides are mainly governed by the nature of the exposed crystal planes. For instance, the predominant presence of {110} planes which are rich in active $Co^{3+}$ on $Co_3O_4$ nanorods led to a much higher activity for CO oxidation than the nanoparticles that mainly exposed the {111} planes. The simultaneous exposure of iron and oxygen ions on the surface of $Fe_2O_3$ nanorods have significantly enhanced the adsorption and activation of NO and thereby promoted the efficiency of DeNOx process. Moreover, the exposed surface planes of these rod-shaped oxides mediated the reaction performance of the integrated metal-oxide catalysts. Au/$CeO_2$ catalysts exhibited outstanding stability under water-gas shift conditions owing to the strong bonding of gold particle on the $CeO_2$ nanorods where the formed gold-ceria interface was resistant towards sintering. Cu nanoparticles dispersed on $La_2O_3$ nanorods efficiently catalyzed transfer dehydrogenation of primary aliphatic alcohols based on the uniue role of the exposed {110} planes on the support. Morphology control at nanometer level allows preferential exposure of the catalytically active sites, providing a new stragegy for the design of highly efficient nanostructured catalysts.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.780-786
• /
• 2005

The biomass of the brown seaweed, Ecklonia, was used to remove Cr(VI) from wastewater. Previously, Cr(VI) was removed through its reduction to Cr(III) when brought into contact with the biomass. In this study, the effects of ionic strength, background electrolytes, and Cr(III), Ni(II), Zn(II), and Fe(III) on the Cr(VI) reduction were examined. An increased ionic strength inhibited the Cr(VI) reduction. The presence of other heavy metals, such as Cr(III), Ni(II), or Zn(II), only slightly affected the Cr(VI) reduction, while Fe(III) enhanced the reduction. Although the above various parameters could affect the reduction rate of Cr(VI) by Ecklonia biomass, these effects were relatively smaller than those of pH and temperature. In addition, the previously derived rate equation was found to be applicable over a range of ionic strengths and with different background electrolytes. In conclusion, Ecklonia, bioniass may be a good candidate as a biosorbent for the removal of Cr(VI) from wastewaters containing various other impurities, and scale-up to a practical process may be accomplished using the previously derived rate equation.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.56-62
• /
• 2000

The hpa gene genetically linked to the ctxa2b gene was cloned into the pTED expression vector, and the constructed pTEDhpa/ctxa2b was transformed into Excherichia coli. The fusion protein, the adhesin fused to the cholera toxin subunit A2B (CTXA2B) subunit, was expressed to high levels as inclusion bodies in E. coli. The expressed protein was partially purified by washing the inclusion bodies with working solution containing 8M Urea and 0.1M DTT. Refolding of denatured fusion protein was carried out in the presence of glutathione redox buffer. The refolded fusion protein was purified by size exclusion chromatography. The expressed fusion protein was verified by SDS-PAGE, western blotting with antibodies to both antigenic components of adhesin and cholera toxin subunit B (CTXB), and its N-terminal amino acid sequence was analyzed. The orderly assembled fusion protein was confirmed by modified Gm1-ganglioside ELISA with Abs to adhesin. The results indicate that the purified fusion protein is an Adhesin/CTXA2B protein containing the H. pylori adhesin and $G_{m1}4-ganglioside binding activity of CTXB and the expressed fusion protein in E. coli could be easily purified by the refolding process, Its molecular weight was 168kDa as estimated by size exclusion chromatography. The Adhesin/CTXA2B protein may be used as a candidate antigen for oral immunization against H. pylori.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.667-671
• /
• 2015

Enzyme fuel cells were operated with cells composed of enzyme anode and PEMFC cathode. Enzyme anodes was fabricated by compression of a mixture of graphite particle, glucose oxidase(Gox) as a enzyme and ferrocene as a redox mediator, and then coated with Nafion ionomer solution. Performances of enzyme unit cell were measured with variation of anode manufacture factors, to find optimum condition of enzyme anode. Optimum pressure was 8.89MPa for enzyme anode pressing process. Highest power density was obtained at 60% graphite composition in enzyme anode. Optimum glucose concentration was 1.7 mol/l in anode substrate solution. The enzyme anode was stabilized by two times of deeping in Nafion solution for 1 sec.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.782-788
• /
• 2001

The $[Ru(v-bpy)_3]^{2+}$ and vinylbenzoic acid (vba) were electrochemically copolymerized to afford electrodes modified with dopamine to study their properties such as electropolymerization rate, redox process, and electron transfer. The optimum mole ratio of the monomers was 5:2, which gave $1.84{ imes}10^{-2}s^{-1}$ of rate constant for first order reaction, while the ratio of the substances on the copolymeric film produced was 5:1.68. The formal potential produced from the hydroquinone=quinone+$2H^+2e^-$reaction at the electrode of GC/p- $[Ru(v-bpy)_3]^{2+}$/vba-dopamine was 0.17 V in phosphate buffer (pH=7.10). The electrocatalytic rate was $2.58{ imes}10^5cms^{-1}$;2.41 times faster than that of non-modified one. The mass change measured by EQCM was $3.28{ imes}10^3$$gmol^{-1}$ which is larger than that of non-modified one.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.250-257
• /
• 1987

The electrical conductances for the thorium (IV) complexes with crown ethers have been measured in DMSO, and water solvents, and the oxidation-reduction reaction mechanisms, electron number and diffusion coefficients in the reversible reduction process have been examined by polarography and cyclic voltammography. The dissociation mole ratio of $Th^{4+}$ and nitrate ion are 1:1 and in aprotic solvent, and 1:4 in protic solvent like as water. The limiting molar conductances of all complexes in aprotic solvent have been found to be in the range of $92.2{\times}159$ $ohm^{-1}cm^2mol^{-1}$. In aprotic solvent, DMSO, the reduction of each complex is reversible by one electron reduction of one step, and the range of diffusion coefficients is obserbed to be $5.83\;10^{-6}{\sim}6.90{\times}10^{-6}$. The complexes which have reduction step were hydrolyzed above at 1.8volt with reference saturated calomel electrode, generating the hydrogen gas. The reaction mechanisms of thorium (IV)-crown ether complexes appear as follows. ${Th_m(IV)L_n(H_2O)_x(NO_3)_{4y}}_=^{DMSO} {\overline{{Th_m(IV)L_n(H_2O)_x(NO_3)_{4y-1}}}^+ + NO_3-$

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.435-436
• /
• 2008

Dye-sensitized Solar Cells(DSSCs) which convert incident sun light into electricity were expected to overcome global warming and depletion of fossil fuels. And it is one of study that is lately getting into the spotlight because manufacturing method is more simple and inexpensive than existing silicon solar cells. In this respect, DSSCs are in the limelight as the next generation solar cells. DSSCs are generally composed of a dye-modified $TiO_2$ photoelectrode, a Pt counter electrode, and an electrolytes containing a redox couple$(I^-/I_3^-)$. Among these elements, pt electrode were prepared by applying electric potential to FTO substrate in the $H_2PtCl_6$ solution. In this study, we report the solar cell efficiency depending on $PtCl_4$ concentration change. $PtCl_4$ concentration was 1mM, 5mM, 10mM, and 20mM, and adhered on FTO glass substrate by sintering process. When applied each $PtCl_4$ counter electrode on DSSC, the best efficiency was found at 10mM of $PtCl_4$ concentration. The catalyst promotes the movement of electron from the counter electrode to the electrolyte the higher the molarity, the better the efficiency. However, in case of 20mM, it is estimated that over-deposited $PtCl_4$ tends to restrict the movement of electron due to its bundle formation.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.295-302
• /
• 1995

Menadione-ghitathione conjugate (MEN-SG), a metabolite of menadione, is known to be a redoxcycler in rat hepatocyte subcellular fraction. Therefore, it was assumed that MEN-SG could exert cytotoxlclty to ral platelets, another target tissue of menadione. We first synthesized MEN-SG, the identity of which was verified by mass, $^1{H}$-NMR and UV-visible spectra. In addition, the stability of MEN-SG was investigated in biological assay system. MEN-SG was degraded in a time-dependent manner in DMSO which had been used as a vehicle and thus, tris-HCl buffer was used as a vehicle of MEN-SG despite the low solubility in it. Perchloric acid as well as platelets itself did not affect the stability of MEN-SG. Our next attempt was the evaluation of cytotoxicity of MEN-SG in rat platelets. MEN-SG did not induce cytotoxicity to rat platelets measured by two different methods, LDH release and turbidity changes. The extents of oxygen consumption by MEN-SG in intact platelets were significantly lower than those by menadione, though it had been observed that oxygen consumptions by menadione and MENSG were similar in subcellular fractioas of platelets. These results suggest that MEN-SG is not toxic to rat platelets despite its redox cycling capacity and glutathione conjugation reaction of menadione could be regarded as a detoxification process.

• Journal of the Korean Chemical Society
• /
• v.48 no.5
• /
• pp.519-526
• /
• 2004

The purpose of this study was to search pre-service teachers?and chemistry teachers?conceptions related to electrolysis process by predicting electrolysis products in NaI solution. A questionnaire developed by the researchers and following interviews were adopted for the research. By the methods, the conceptions of the groups were compared. Also, the relationship between their conceptions and explanations of chemistry II textbooks and general chemistry books was examined. From the analysis, it was found that most of the pre-service teachers had difficulties in using standard electrode potential when they predicted products of electrolysis. Most of the chemistry teachers could use standard electrode potential, but it was difficult to understand water electrolysis in redox reaction. The explanations of chemistry II textbooks also contained misconceptions.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1703-1706
• /
• 1996

The purpose of this study is to research and develop polypyrrole(PPy) positive for thin film rechargeable lithium battery. We investigated cyclic voltammetry, AC impedance response and charge/discharge cycling of PPy/SPE/Li cells as a function of temperature. The redox capacity of $PPy/CF_{3}SO_{3}$ film was the most large. The discharge capacity of PPy/SPE/Li cell with $PPy/CF_{3}SO_{3}$ film was higher than those of $PPy/ClO_{4}$ and $PPy/AsF_6$ films at all cycles. The energy density of PPy/SPE/Li cells during 1st cycle was 73, 90 and 101Wh/kg at $25^{\circ}C$, $45^{\circ}C$ and $60^{\circ}C$, respectively. The improvement of energy density is due to reduction of charge-transfer resistance associated doping-undoping process in PPy film with Increasing temperature. $PPy/CF_{3}SO_{3}$ film shows a good property on charge/discharge cycling in PEO-$LiClO_4$-PC-EC electrolyte.