• Korean Journal of Materials Research
• /
• v.32 no.10
• /
• pp.425-428
• /
• 2022

In this study, Y₃Al₅O₁₂:Eu³⁺ red phosphors were synthesized at different temperatures using a solid state reaction method. The crystal structures, surface and optical properties of the Y₃Al₅O₁₂:Eu³⁺ red phosphors were investigated using X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and photoluminescence (PL) analyses. From XRD results, the crystal structure of the Y₃Al₅O₁₂:Eu³⁺ red phosphors was determined to be cubic. The maximum emission spectra were observed for the Y₃Al₅O₁₂:Eu³⁺ red phosphor prepared by annealing for 4h at 1,700 ℃. The 565~590 nm photoluminescent spectra of the Y₃Al₅O₁₂:Eu³⁺ red phosphors is associated with the ⁵D₀ → ⁷F₂ magnetic dipole transition of the Eu³⁺ ions. The intensity of the photoluminescent spectra in the red phosphors is more dominant for the magnetic dipole transition than the electric dipole transition with increasing annealing temperature. The International Commission on Illumination (CIE) coordinates of Y₃Al₅O₁₂:Eu³⁺ red phosphors prepared by 1,700 ℃ annealing temperature are X = 0.5994, Y = 0.3647.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.58-62
• /
• 1995

Substituted 3-phenyl-1-silabutanes such as 3-phenyl-1-silabutane (1), 3-(2,5-dimethylphenyl)-1-silabutane (2), 3-(p-chlorotolyl)-1-silabutane (3), and 3-naphthyl-1-silabutane (4) were prepared in 62-96% yield by reduction of the corresponding substituted 3-phenyl-1,1-dichloro-1-silabutanes with LiAlH4. The dehydrogenative polymerization of the monomer silanes was carried out with Cp2MCl2/Red-Al (M=Ti, Hf) catalyst system. The molecular weight of the polymers produced ranged from 700 to 1300 (vs polystyrene) with degree of polymerization (DP) of 5 through 16 and with polydispersity index (PDI)=1.1-2.1. The dehydrogenative polymerization of the monomer silanes with Cp2TiCl2/Red-Al catalyst system occurred at a faster rate and produced somewhat higher molecular weights of polysilane than that with Cp2HfCl2/Red-Al catalyst system.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.138-143
• /
• 1995

Substituted 3-phenyl-1-silabutanes, 3-chlorophenyl-1-silabutane (1), 3-tolyl-1-silabutane (2), and 3-phenoxyphenyl-1-silabutane (3), were prepared in 68-98% yield by reduction of the corresponding substituted 3-phenyl-1,1-dichloro-1-silabutanes with LiAlH4. The dehydrogenative homopolymerization and copolymerization of the silanes were performed with Cp2MCl2/Red-Al (M=Ti, Hf) catalyst system. The molecular weights of the resulting polymers were in the of range 600 to 1100 (vs polystyrene) with degree of polymerization (DP) of 5 to 8 and polydispersity index (PDI) of 1.6 to 3.8. The monomer silanes underwent the dehydrogenative polymerization with Cp2TiCl2/Red-Al catalyst to produce somewhat higher molecular weight polysilanes compared with Cp2HfCl2/Red-Al catalyst.

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.453-458
• /
• 2008

New inorganic red pigments based on Cr-doped $Y_2O_3$ and $Al_2O_3$ were synthesized by solid state method and characterization of their pigments were characterized by using XRD, FT-IR, SEM and UV-Vis spectrophotometer. The single perovskite phase revealed at $1450^{\circ}C{\sim}1550^{\circ}C$ for 6 h due to using mineralizers. The color of pigment powders resulted out various red-shades depending on the compositions of used materials and temperatures. Glazed tiles painted with pigment powders showed red color in oxidation and reduction firing. The best red colour was obtained when the $Cr_2O_3$ was used 0.04 mole at $1450^{\circ}C$ for 6 h.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.248-249
• /
• 2017

Red mud is an industrial by-product produced during the manufacturing aluminum hydroxide (Al(OH)₃) and aluminum oxide(Al₂O₃) from Bauxite ores. In Korea, approximately 2tons of red mud in a sludge form with 40~60% moisture content is produced when 1 ton of Al₂O₃ is produced through the Bayer process. An annual production of approximately 20tons are produced by company K, which is responsible for most of the domestic production. Therefore, in order to utilize Red Mud in the construction industry, this study evaluated the pore characteristics of ordinary portland cement mortar according to the red mud replacement ratio.

• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2018

Red phosphor in glasses (PiGs) for automotive light-emitting diode (LED) applications were fabricated with 620-nm $CaAlSiN_3:Eu^{2+}$ phosphor and Pb-free silicate glass. PiGs were synthesized and mounted on high-power blue LED to make a monochromatic red LED. PiGs were simple mixtures of red phosphor and transparent glass powder. After being fabricated with uniaxial press and CIP at 300 MPa for 20 min, the green bodies were thermally treated at $550^{\circ}C$ for 30 min to produce high dense PiGs. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30% phosphor had a full sintered density. Changes in photoluminescence spectra and color coordination were studied by varying the thickness of plates that were mounted after optical polishing. As a result of the optical spectrum and color coordinates, PiG plate with $210{\mu}m$ thickness showed a color purity of 99.7%. In order to evaluate the thermal stability, the thermal quenching characteristics were measured at temperatures of $30{\sim}150^{\circ}C$. The results showed that the red PIG plates were 30% more thermally stable compared to the AlGaInP red chip.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.517-525
• /
• 2017

Red mud is an industrial by-product produced during the manufacturing aluminum hydroxide ($Al(OH)_3$) and aluminum oxide($Al_2O_3$) from Bauxite ores. In Korea, approximately 2 tons of red mud in a sludge form with 50% moisture content is produced when 1ton of $Al_2O_3$ is produced through the Bayer process. In the paper, dispersion characteristics of liquefied red mud that does not require heating and grinding process for recycling were investigated through viscosity and sediment index. The results showed that the sediment index of liquefied red mud increased but viscosity of that decreased with a higher W/R ratio. Also we proposed the range of initial viscosity from 2000cP to 8000cP and target sedimentation index below 20% at elapsed time 180days for stable dispersion of liquefied red mud.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.422-426
• /
• 2006

[ $Sr_xCa_{(1-x)}TiO_3$ ] red phosphors doped with Pr(0.13 mol%) and Al(0.23 mol%) were synthesized by solid state reaction method. Change of crystal structure occurred in $Sr_xCa_{(1-x)}TiO_3:Pr,Al$ phosphors with increasing value of x. Green and red luminescence were observed from $SrTiO_3:Pr,Al$ phosphors at low temperature. However, only red luminescence in the case of $CaTiO_3:Pr,Al$ phosphors was measured at low temperature. The main cause of green luminescence was explained by the bandgap reduction.