• KSBB Journal
• /
• v.27 no.4
• /
• pp.263-267
• /
• 2012

The purpose of this study was to determine optimum value of aeration rate for the cultivation of Chlorella sp. under illumination of red light emitting diode. The aeration rates varied from 0 to 2.4 vvm under the illumination of 4,400 lux of red light emitting diode. The highest specific growth rate of $1.51\;day^{-1}$ was obtained at the aeration of 0.7 vvm and lower specific growth rates were obtained for other aeration tests. Furthermore, the highest biomass concentration (1.02 g/L) was also obtained at the aeration of 0.7 vvm. Therefore, aeration of 0.7 vvm was determined to be the optimum aeration rate for the cultivation of Chlorella sp. under red light emitting diode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.125-131
• /
• 2014

The purpose of this study is to verify the utility of reflected photoplethysmography sensor using two green light emitting diodes that influenced by ambient light. Recently it has been studied that green light emitting diode is suitable for light source of reflected photoplethysmography sensor at low temperature and high temperature. Another study showed that, green light is better for monitoring heart rate during motion than led light. However, it has a bad characteristic about ambient light noise. To verify the utility of reflected photoplethysmography sensor using green light emitting diode, this study measures the photoplethysmography signal that is distorted by ambient light and will propose a solution. This study has two parts of research method. One is measurement system that composed sensor and board. The sensor is made up PE-foam and Non-woven fabric for flexible sensor. The photoplethysmography signal is measured by measurement board that composed high-pass filter, low-pass filter and amplifier. Ambient light source is light bulb and white light emitting diode that has three steps brightness. Photoplethysmography signal is measured with lead II electrocardiography signal at the same time and it is measured at the finger and radial artery for 1 minute, 1000 Hz sampling rate. The lead II electrocardiography signal is a standard signal for heart rate and photoplethysmography signal that measured at the finger is a standard signal for waveform. The test is repeated 3 times using three sensor. The data is processed by MATLAB to verify the utility by comparing the correlation coefficient score and heart rate. The photoplethysmography sensor using two green light emitting diodes is shown better utility than using one green light emitting diode and red light emitting diode at the ambient light. The waveform and heart rate that measured by two green light emitting diodes are more identical than others. The amount of electricity used is less than red light emitting diode and error peak detectability factor is the lowest.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.712-713
• /
• 2017

Clinically applicable light emitting diode (LED) has been widely investigated because of relatively low heat generation, low cytotoxicity, and non-invasiveness compared to other therapeutic methods. Therefore, we investigated the therapeutic effects of several wavelengths of light emitting diode against human cervical cancer cells and analyzed the individual inhibitory effect for the cancer cell proliferation. In the experiment, prepared HeLa cells were exposed by red, green and blue light-emitting diode for 10 minutes each. Relatively short-wavelength light-emitting diode (blue) showed stronger therapeutic effects than relatively long-wavelength light-emitting diodes.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1870-1878
• /
• 2021

Objective: The objective of this experiment was to investigate the effects of different colors produced by light emitting diode (LED) on Brown Tsaiya ducks. Methods: A total of 144 female Brown Tsaiya ducks were randomly allocated into three individual cage rearing chambers with different LED illumination colors as treatments. Three different treatments were: i) white color, ii) blue color, and iii) red color. The experiment periods were from ducks 21 to 49 weeks of age, determined traits included i) egg laying performance, ii) feed intake, iii) egg shell breaking strength, iv) egg shell thickness, v) egg Haugh unit, vi) egg weight, vii) serum Estradiol and Progesterone concentration, and viii) behavior pattern. Results: The results indicated that when compared with white and blue color, red color could stimulate ducks sexual maturation and raised the egg laying performance. The red light group was also observed to have the highest feed intake among three treatments. The blue treatment had the lowest egg shell breaking strength and the highest egg weight among three treatments, nevertheless, no significant difference was observed among three treatments on egg shell thickness and egg Haugh unit. The red light group had higher serum estradiol concentration than the white and blue groups, but no significant difference among treatments on the serum Progesterone concentration was found. The results of behavior pattern indicated that red light group showed more feeding and less resting behavior compared to the blue light group. Conclusion: We found a potential of applying red light illumination in the indoor laying duck raising system with positive results on egg laying performance and acceptable egg weight, equivalent egg qualities compared to white and blue light.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.44-49
• /
• 2014

In this study, we investigated the effects of sodium hypochlorite (NaOCl) and red or blue light-emitting diode (LED) light on embryo swelling and germination of Oreorchis patens (Lindl.) Lindl. A method for determining the swelling and protocorm formation in O. patens seeds through in vitro examination of immature seeds was established. NaOCl treatment of immature seeds was found to significantly enhance the extent of embryo swelling and protocorm formation in immature zygote embryos compared to those in the untreated controls. Additionally, the effects of white fluorescent light, and red and blue LED lights on embryo swelling and protocorm formation in in vitro cultured seeds were examined and compared to the conditions with or without NaOCl treatment. The most suitable light for embryo swelling and protocorm formation was the red LED light.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.41-47
• /
• 2012

The purpose of this study was to determine optimum condition for the cultivation of Chlorella sp. FC-21 using red light emitting diodes (LED). Specific growth rate and cell concentration were measured for the reactors at the illuminations of different light intensity of red LED. Under the illumination of red LED, specific growth rate increased as light intensity increased but cell concentrations decreased. To determine beneficial effect of aeration to cell cultivation, micro-air bubbles were aerated at 0.7 vvm in the reactor at the illumination of red LED. Two and ten times greater specific growth rate and cell concentration were obtained when aeration was applied. In case of blowing of carbon dioxide, pH of culture medium decreased below to pH 3, which resulted in decreases of cell concentration. From this study, we found that red LED with aeration were the most appropriate light source for the cultivation of Chlorella sp. FC-21.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.121-124
• /
• 2000

Achieving red light-emitting diodes with high quantum and luminous efficiency is required to fabricate the full-color organic electroluminescence display. In this work, we report that devices with 2.3,7,8,12,13,17,18-Octaethyl-21H,23H-porphine palladium (II) (PdOEP), doped into tris(8-Hydroxyquinolinato)-aluminum (III) (Alq3) show a narrow deep red emission (670nm). In addition, PdOEP has been used as host material in which red dyes such as 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) doped in order to fabricate efficient red-emitting diodes.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.750-754
• /
• 2010

Among the environmental conditions employed in micropropagation, light quality plays an important role in growth, specially morphogenesis and photosynthesis. The effect of radiation quality (350-740 nm) on the development and growth of zygotic embryos and in vitro plantlets of open-pollinated chestnut (Castanea crenata S. et Z.) were studied. Two types of explants were exposed for 4 weeks to cool white (W, as control), monochromatic red (R, peak emission 650 nm), monochromatic blue (B, peak emission 440 nm), red+blue (R+B, 1:1), or red+far-red (R+Fr, 1:1, far-red peak emission 720 nm) radiation from a light-emitting-diode (LED) system. While the zygotic embryos showed positive photoblastic behavior, their germination was inhibited by blue radiation. Hypocotyl elongation and root development were promoted by red radiation. The emergence of primary leaf and its expansion were faster under blue than under red radiation. In the plantlets, red and red+far-red radiation significantly increased the formation and growth of the root, whereas blue light reduced rooting. Therefore, radiation quality appears to influence some steps in the development of zygotic embryos and plantlets in the chestnut.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.247-250
• /
• 2015

Organic light-emitting diode (OLED) research field has received great attention from academic and industrial circles. Recently, The technical feature of OLEDs is more and more attractive in the lighting market, including area emission characteristics different from other existing light sources. Features are environmentally friendly and efficient use of energy, large area, ultra-light weight, and ultrathin shape, etc. Furthermore, OLED light became the mainstream of next-generation lighting to replace the light emitting diode (LED) fluorescent light. This article summarizes phosphorescent emitting materials that have been applied to white OLEDs. In particular, the chemical structures and device performances of the important yellow, orange, and red phosphorescent emitting materials is discussed. Systematic classification and understanding of the phosphorescent materials can aid the development of new light-emitting materials.