• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.393-401
• /
• 2006

The development of Korean glaze originated from the development of ash glazes. Ash not only has strong solubility but also can shows the glaze a variety of different colors according to what the glaze has in it as the main component. In addition, it gives a feeling of lucidness and softness. For these reasons, there are a lot of needs for ash and many potters want to take advantage of ashes as glaze. But natural ashes have not been widely used as glaze primarily because it is relatively hard to find or manufacture. Considering the difficulty of finding or manufacturing natural ashes, this study aims to formulate synthetic ash which not only is available to the potters in general but also has the sam ε characteristics as the natural ashes. To achieve this aim, this study examines the characteristics of the pine tree ash, the main component of the glaze of celadon porcelains, and the red pepper stem ash, the main component of the brown glaze, both of which have been used by the Korean traditional potters. In this study, the alkaline component of the glaze. A important ingredient when the ashes are synthesized, was supplied by mixing of $Na_2CO_3$, Chungju limestone and rice straw ash. Furthermore, the synthetic ash, when it shows no change of pH in its composition rate of 6:2:2, was found to be usable as the most stable material. In conclusion, the formula which frits some raw $materials-Na_2CO_3$, Chungju limestone and rice straw ash-can duplicate the synthetic ash which is simila to the natural ash.

• Journal of Ecology and Environment
• /
• 제30권4호
• /
• pp.281-285
• /
• 2007

We conducted research to determine the effects of forest tending works (FTW) on forest carbon (C) storage in Korean red pine forests by estimating changes in the quantity and distribution of stored organic C in an approximately 40-year-old red pine stand after FTW. We measured organic C storage (above- and belowground biomass C, forest floor C, and soil C at 50 cm depth) in the Hwangmaesan Soopkakkugi model forest in Sancheonggun, Gyeongsangnam-do before and after the forest was thinned from a density of 908 trees/ha to 367 trees/ha. The total C stored in tree biomass was 69.5 Mg C/ha before FTW and 38.6 Mg C/ha after FTW. The change in total C storage in tree biomass primarily resulted from the loss of 19.9 Mg C/ha stored in stem biomass after FTW. The total C pool in this red pine stand was 276 Mg C/ha before FTW and 245.1 Mg C/ha after FTW. Prior to FTW, 71.5% of the total C pool was stored in mineral soil, 25.2% in tree biomass, and 3.3% in the forest floor, where as after FTW 80.5% of the total C pool was stored in mineral soil, 15.7% in tree biomass and 3.7% in the forest floor. These results suggest that the development of site-specific tending techniques may be required to minimize the loss of tree biomass C storage capacity in red pine stands from FTW.

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.52-59
• /
• 2001

본 연구는 양생방법과 양생온도에 따른 소나무, 낙엽송, 북양가문비나무 변재부에서 CCA와 CCFZ의 정착특성을 조사하기 위하여 수행되었다. 방부제 유효성분의 정착 정도는 6가크롬의 3가크롬으로 환원율에 의해 결정하였으며, 연구결과를 토대로 수종, 방부제, 양생방법, 양생온도의 조합별 적정 양생기간을 예측하였다. 양생방법에 관계없이 양생온도가 높을수록 방부제 유효성분들의 정착이 크게 가속되었으며, 건조양생에 비하여 비건조양생시 정착이 빨리 진행되었다. 수종간의 양생속도는 양생방법과 방부제의 종류에 관계없이 전반적으로 소나무>낙엽송>북양가문비나무 순으로 빨랐고, 소나무를 대상으로 비교한 방부제간의 정착속도는 CCA 2호>CCA 3호>CCFZ의 순이었다. 양생방법에 관계없이 양생온도와 양생 소요기간간의 상관이 매우 우수하여 처리재 양생장소의 대기온도에 의해 수종과 방부제의 조합별 적정 양생기간을 거의 완벽하게 예측할 수 있었다.

• Journal of Ecology and Environment
• /
• 제30권1호
• /
• pp.101-105
• /
• 2007

Lammas growth, a rare phenomenon for Korean red pine (Pinus densiflora), occurred in 2006. Lammas shoots showed higher frequency and longer length in Seoul's hotter urban center than in urban boundary or suburban forest sites. Frequency and length showed a close correlation with urbanization density and vegetation cover expressed in NDVI. Air temperature in the late summer of 2006 was more than $1^{\circ}C$ higher than an average year. Of the predominant environmental signals that modulate bud flush, only temperature changed significantly during the year. Differences in temperature between the urban centers, urban boundaries and suburban forests correlated with varying land-use density. The rise in temperature likely spurred lammas growth of the Korean red pine. Symptoms of climate change are being detected throughout the world, and its consequences will be clearer in the future. Considerate interest in the responses of ecological systems to the variable changes is required to prepare for unforeseeable crises. Monitoring of diverse ecological phenomena at Long Term Ecological Research sites could offer harbingers of change.

• 한국산림과학회지
• /
• 제110권4호
• /
• pp.569-576
• /
• 2021

This study developed an estimation model for litterfall input using the stand parameters (basal area, stand density, mean DBH, and carbon stocks of the aboveground tree biomass) collected from the Korean red pine (Pinus densiflora S. et Z.) stands of seven regions in Gyeongsangnam-do. The mean annual litterfall was 2,779 kg ha^-1 year^-1 for needles, 883 kg ha^-1 year^-1 for miscellaneous, 611 kg ha^-1 year^-1 for broadleaved, 513 kg ha^-1 year^-1 for branches, and 340 kg ha^-1 year^-1 for bark litter. The mean annual total litterfall was 5,051 kg ha^-1 year^-1. Litterfall components were significantly correlated with stand parameters, except for broadleaved litter. A stronger correlation was observed between the carbon stock of the aboveground tree biomass and all the litterfall components compared with the other stand variables. The allometric equations for all the litterfall components were significant (P < 0.05), with the stand parameters accounting for 5%-43% and 8%-42% of the variation in the needle litter and total litterfall, respectively. The results indicated that the annual litterfall inputs of the Korean red pine stands on a regional scale can be effectively estimated by allometric equations using the basal area and carbon stocks of the aboveground tree biomass.

• 한국산림과학회지
• /
• 제108권1호
• /
• pp.21-28
• /
• 2019

This study was conducted to determine the carbon (C) and nitrogen (N) response of litterfall components as affected by N addition in compound fertilizer in a Korean red pine (Pinus densiflora S. et Z.) stand in southern Korea. Litterfall in a mature red pine stand was collected for two years following compound fertilizer application ($N_3P_4K_1$; $P_4K_1$) and no fertilization (control). The C concentration of litterfall components was not significantly (P > 0.05) different between the $N_3P_4K_1$ and the control plots, whereas the N concentration of the litterfall components was significantly higher in the $N_3P_4K_1$ plot than in the control plot. The $N_3P_4K_1$ and $P_4K_1$ additions induced a lower C/N ratio of litterfall components compared with the control plot. Annual C and N fluxes via litterfall components were not affected by the $N_3P_4K_1$ addition over the study period, except for reproduction litter. Annual N fluxes via reproduction litter were significantly higher in the $N_3P_4K_1$ plot than in the control plot. Thus, the $N_3P_4K_1$ and $P_4K_1$ additions could modify differently nutrient distribution of the forest floor and mineral soils in a red pine stand. These results indicate that N concentration and C/N ratio in litterfall components are more susceptible to fertilizer application than the C response in litterfall components.

• Journal of the Korean Wood Science and Technology
• /
• 제50권1호
• /
• pp.1-11
• /
• 2022

To evaluate the bearing strength of red pine cross-laminated timber (CLT) with self-tapping screw (STS), which is widely used as a fastener for connection in CLT building, the bearing test was conducted. Accoring to the STS's diameters (8, 10, 12 mm), the bearing test specimens with half hole were manufactured. Bearing strength was compared and reviewed in consideration of the configuration in STS and the loading direction to the grain of red pine. As a result of the bearing test on the STS's diameter, the yield bearing load increases as the larger diameter of the STS in all directions of the red pine. The bearing strength of the thread part (thread + tip) was higher than the shank part (shank + shank cutter). In compared with the directions to the grain of red pine, the bearing strength of the cross section parallel to the loading direction was the highest, and the tangent section was the lowest bearing strength. The average bearing strength of the loading direction in parallel to the grain was 23.43 MPa, which was about 45% higher than the average 16.16 MPa in perpendicular to the grain. The predicted bearing strength calculated by Eurocode (EN) and Korean Building Code (KBC)'s equation was lower than the experimental value. It is nessesary to propose the new equations of bearing strength reflected the configuration information of STS.

• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.27-31
• /
• 2003

이 논문은 소나무와 일본잎갈나무의 변장 14.0 cm와 16.5 cm인 큰 정각재의 천연건조과정과 함수율분포에 관한 내용으로서 건조속도는 건조개시 첫 8주 동안 비교적 컸었으나, 그 이후부터 점차 감소하였다. 생재에서 규격함수율 18% 수준까지 건조시간은 소나무 14.0 cm와 16.5 cm가 각각 26주와 32주이고, 일본잎갈나무의 경우는 각각 32주와 48주이었다. 이들 정각재의 재장방향과 두께방향의 수분경사는 비교적 완만하였다. 일본잎갈나무의 수분경사는 소나무의 것보다 컸었고, 일본잎갈나무의 변장의 크기가 수분경사에 미치는 영향은 소나무의 것보다 컸었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.202-212
• /
• 2017

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

• 한국농림기상학회지
• /
• 제19권1호
• /
• pp.10-18
• /
• 2017

소나무는 우리나라에서 생태적, 사회 문화적으로 가장 중요한 수종으로 보호 이용되어 온 수종이다. 그러나 산림유전자원보호구역 내 금강소나무 고사가 발생하고 있어 명확한 원인 구명 및 대책 마련이 필요하다. 따라서 본 연구에서는 금강소나무의 고사 원인 구명을 위해 시계열 항공영상을 이용하여 금강소나무 고사 발생 전수 조사를 실시하고 고사발생 지역에 대한 지형환경특성을 분석하여, 소나무 고사의 위치적 특성 및 이에 따른 기상 요인과의 연관성을 파악하였다. 그 결과, 2,600ha 연구 대상지 내에서 약 1,956본의 금강소나무 고사목이 추출되었다. 소나무의 고사는 소나무 생육지역에 비해 고도가 높고, 일사량이 많고, 지형습윤지수가 낮은 지역, 남 남서사면, 능선 부위, 풍노출도가 높은 지역에 집중되어 발생한 것으로 나타났다. 이러한 지역은 지형조건에 따라 영향을 받는 미기상 특성에 따라 고온과 건조 스트레스가 상대적으로 높은 지역으로 분류되는 지역이다. 기후변화에 따라 고온 건조 스트레스가 전반적으로 높아지고 있으며 취약지역을 중심으로 스트레스의 임계치를 넘으면서 고사현상이 발생하는 것으로 추정되었다. 이러한 지형환경 특성을 바탕으로 MaxEnt 모형을 이용하여 소나무 고사 발생 위험 지도를 제작하였으며, 이는 향후 소나무 보호 관리 대책 수립에 활용될 수 있다.