• 제목/요약/키워드: Recycling waste asphalt concrete

검색결과 25건 처리시간 0.025초

폐타이어 재활용 아스팔트 혼합물의 기계적 성질에 대한 습윤과 동결 융해의 영향 (Effect of Moisture and Freeze-Thaw on Mechanical Properties of CRM Asphalt Mexture)

  • 김낙석;조기주
    • 자원리싸이클링
    • /
    • 제9권3호
    • /
    • pp.37-45
    • /
    • 2000
  • 본 논문은 가열 페타이어 재활용 아스팔트 혼합물의 습윤과 동결융해 저항성에 대한 시험결과를 나타내고 있다. 재래식 아스팔트 혼합물과 페타이어 재활용 아스팔트의 기계적 특성을 비교하기 위하여 각기 다른 습윤 조건과 동결 융해 횟수하에서 시험이 수행되었다. 또한, 두 혼합물에 대한 최적 아스팔트 함량을 결정하기 위하여 마샬배합설계가 우선 수행되었다. 본 연구에서 수행된 시험결과에 의하면 페타이어 재활용 아스팔트 혼합물의 습윤과 동결-융해 저항성이 재래식 아스팔트 혼합물보다 우수함을 나타내었다. 따라서 향후 도로포장 재료로의 페타이어 재활용은 습윤과 동결융해로 인한 피해를 최소화할 수 있을 것으로 기대된다.

  • PDF

TDF ash를 채움재로 사용한 아스팔트 콘크리트 물성 평가 (Evaluation of TDF ash as a Mineral Filler in Asphalt Concrete)

  • 최민주;이재준;김혁중
    • 한국도로학회논문집
    • /
    • 제18권4호
    • /
    • pp.29-35
    • /
    • 2016
  • PURPOSES : The new waste management policy of South Korea encourages the recycling of waste materials. One material being recycled currently is tire-derived fuel (TDF) ash. TDF is composed of shredded scrap tires and is used as fuel in power plants and industrials plants, resulting in TDF ash, which has a chemical composition similar to that of the fly ash produced from coal. The purpose of this study was to evaluate the properties of an asphalt concrete mix that used TDF ash as the mineral filler. METHODS : The properties of the asphalt concrete were evaluated for different mineral filler types and contents using various measurement techniques. The fundamental physical properties of the asphalt concrete specimens such as their gradation and antistripping characteristics were measured in accordance with the KS F 3501 standard. The Marshall stability test was performed to measure the maximum load that could be supported by the specimens. The wheel tracking test was used to evaluate the rutting resistance. To investigate the moisture susceptibility of the specimens, dynamic immersion and tensile strength ratio (TSR) measurements were performed. RESULTS : The test results showed that the asphalt concrete containing TDF ash satisfied all the criteria listed in the Guide for Production and Construction of Asphalt Mixtures (Ministry of Land, Infrastructure and Transport, South Korea). In addition, TDF ash exhibited better performance than that of portland cement. The Marshall stability of the asphalt concrete with TDF ash was higher than 7500 N. Further, its dynamic stability was also higher than that listed in the guide. The results of the dynamic water immersion and the TSR showed that TDF ash shows better moisture resistance than does portland cement. CONCLUSIONS : TDF ash can be effectively recycled by being used as a mineral filler in asphalt, as it exhibits desirable physical properties. The optimal TDF ash content in asphalt concrete based on this study was determined to be 5%. In future works, the research team will compare the characteristics of asphalt concrete as function of the mineral filler types.

순환 가열 아스팔트의 용도별 기계적성능 평가 및 경제성 분석 연구 (A Study on Mechanical Performance Evaluation and Economic Analysis by Reclaimed Hot Asphalt Pavement)

  • 문성호;가현길;이시원;박용부
    • 토지주택연구
    • /
    • 제10권4호
    • /
    • pp.51-59
    • /
    • 2019
  • The government is encouraging the notice of obligatory reclaimed asphalt as a result of the economic and social positioning of green growth to reduce the amount of waste resources and to solve natural resource problems by recycling continuously generated waste resources. However, it is necessary to develop application guideline for each application to apply reclaimed asphalt to the site because quality control of the reclaimed asphalt is difficult and the specifications are ambiguous as well. Therefore, in this study, the mix design, quality test, performance test, and finite element analysis about reclaimed Asphalt Pavement were conducted to develop application guideline for reclaimed hot asphalt. The mix design was carried out for the comparative general hot mix asphalt mixture, the reclaimed hot mix asphalt mixture using the additive, and the reclaimed hot mix asphalt mixture without the additive. Indirect tensile strength and tensile strength ratio tests were used to characterize the reclaimed hot mix asphalt mixture. Using the results of dynamic modulus test and FWD test for KPRP analysis and finite element analysis, the performance life was evaluated for general pavement and pavement using recycled aggregate. Finally, the life cycle cost analysis was used to compare and analyze the economics of reclaimed asphalt concrete pavement.

Assessment of recycled concrete aggregates as a pavement material

  • Jayakody, Shiran;Gallage, Chaminda;Kumar, Arun
    • Geomechanics and Engineering
    • /
    • 제6권3호
    • /
    • pp.235-248
    • /
    • 2014
  • Population increase and economic developments can lead to construction as well as demolition of infrastructures such as buildings, bridges, roads, etc resulting in used concrete as a primary waste product. Recycling of waste concrete to obtain the recycled concrete aggregates (RCA) for base and/or sub-base materials in road construction is a foremost application to be promoted to gain economical and sustainability benefits. As the mortar, bricks, glass and reclaimed asphalt pavement (RAP) present as constituents in RCA, it exhibits inconsistent properties and performance. In this study, six different types of RCA samples were subjected classification tests such as particle size distribution, plasticity, compaction test, unconfined compressive strength (UCS) and California bearing ratio (CBR) tests. Results were compared with those of the standard road materials used in Queensland, Australia. It was found that material type 'RM1-100/RM3-0' and 'RM1-80/RM3-20' samples are in the margin of the minimum required specifications of base materials used for high volume unbound granular roads while others are lower than that the minimum requirement.

가연성 건설폐기물의 자원화 제고를 위한 방안 (A Study on the Promotion of Combustible Construction Waste Recycling)

  • 박지선;이세현
    • 한국건설순환자원학회논문집
    • /
    • 제4권1호
    • /
    • pp.89-95
    • /
    • 2009
  • 현행 "건설폐기물의 재활용 촉진에 관한 법률" 시행령 별표1에서는 다양한 성상으로 배출되는 건설폐기물의 종류를 17가지로 구분하고 이중 제17호의 혼합폐기물은 건설폐토석을 제외한 나머지 15가지 성상의 건설폐기물중 둘 이상의 건설폐기물이 혼합된 것으로 정의하고 있다. 이중 폐콘크리트, 폐아스콘과 같은 건설폐재류는 대부분이 순환골재와 같이 재활용되고 있으며 폐금속과 같은 유가성 자재류는 대부분 분리 판매되어 2차 제품 제조등에 활용되고 있다. 그러나 폐목재, 폐합성수지, 폐섬유 등과 같은 가연성 폐기물의 경우 발열량이 높고 인체에 해로운 중금속 함유량이 적어 RDF나 RPF와 같은 에너지 연료로 활용이 가능하지만 상당량이 혼합폐기물 형태로 배출되어 단순 소각 및 매립되고 있는 실정이다. 그러므로 본 연구에서는 단순하게 외관상의 분류만을 고려하여 설정한 현행 "건폐법"과는 달리 최초 발생단계에서부터 최종처리까지 건설폐기물의 흐름을 보다 효율적으로 제어할 수 있도록 건설폐기물의 분류를 크게 가연성, 불연성, 가연성 불연성 혼합, 기타 등으로 분류하였다. 가연성 폐기물의 경우 기존의 소각 폐기물을 중심으로 폐목재, 폐섬유 등 기존의 소각 폐기물을 중심으로 분류를 하고 불연성은 재활용이 원활한 건설폐재류와 기타로 구분, 혼합건설폐기물은 발생 자체부터 서로 다른 물질이 결합되어 있어 분리 자체가 어려운 폐기물을 대상으로 하였다. 또한 이상에서 폐기물은 지정폐기물을 제외하고 모든 기타 폐기물로 분류하도록 하였으며 기본적으로 건설현장에서 발생하는 폐기물은 1차적으로 가연성, 불연성, 혼합폐기물로 분류하여 배출하는 시스템이 되도록 폐기물의 분류를 실시하였다.

  • PDF

폐타이어/폐윤활유 열분해 잔류물의 아스팔트 활용기술 (A Study on the Utilization of Waste Tire/Waste Moter Oil Pyrolytic Residue for Asphalt)

  • 김상국;손성근;김동찬
    • 자원리싸이클링
    • /
    • 제4권4호
    • /
    • pp.16-21
    • /
    • 1995
  • 폐타이어/폐윤활유를 열분해하면 대부분이 가스화되고 남는 부분은 카본블랙을 주성분으로 하는 잔류물로써 폐타이어량의 약 30%가 된다. petroleum oil로 조립한 카본블랙을 아스팔트에 분산시킨 결과 아스팔트혼합물의 내구성, 내마모성, 온도-점도 감응성이 크게 향상되었다는 외국의 연구결과를 토대로하여 폐타이어/폐윤활유 열분해 잔류물을 아스팔트 보강재로 활용하기 위한 연구를 수행하였다. 카본블랙이 주성분으로 표면에 오일피막이 형성되어 아스팔트와의 친화력이 높은 잔류물을 아스팔트 보강재로 활용하기 위하여 배합설계, 휠트랙킹, 라벨링등의 실험을 한국에너지기술연구소, 한국도로공사, 국토관리청 등에서 반복실험한 결과 마샬실험값이 KS 규격을 만족하였고 동적안정도가 현저히 향상되어 한냉조건에서 내마모성이 증가한다는 것을 알았다. 환경에 미치는 영향을 조사하기 위하여 용출실험을 하여본 결과 잔류물을 아스팔트 보강재로 활용한 아스팔트콘크리트를 시공하였을 때 주변의 토양에 영향을 미치지 않은 것으로 확인되었다.

  • PDF

건설폐기물 재활용촉진을 위한 종류별 분류 및 발생원단위 산정 방안 (The method for the classification according to their kinds and the estimation of unit generation rate for promoting recycling of construction and demolition(c&d) debris)

  • 이희선;김동식
    • 한국재난정보학회 논문집
    • /
    • 제4권1호
    • /
    • pp.86-100
    • /
    • 2008
  • It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

  • PDF

유변성(油變性) 알키드 수지(樹脂)와 규사(硅砂)를 사용(使用)한 밀입도(密粒度) 투수(透水)콘크리트의 강도(强度) 및 내구특성(耐久特性) (Durability and Strength of Dense Grate Permeable Concrete Using Silica sand and Flexible Alkyd Resin)

  • 김인중;홍창우
    • 자원리싸이클링
    • /
    • 제19권6호
    • /
    • pp.36-42
    • /
    • 2010
  • 건설 분야의 자원재활용 연구는 폐콘크리트의 순환골재화, 아스팔트의 재활용 등에 광범위하게 진행되어온 반면에, 폐식용유를 원료로 한 도로용 포장공법에 관한 연구는 전무한 설정이다. 한국에서는 년간 20만톤의 폐식용유가 배출되며 이중 약 10만톤이 회수 가능한 것으로 추산된다. 폐식용유를 재활용한다면, 폐기비용을 절감할 수 있음은 물론, 하천의 수질오염도 방지할 수 있을 것으로 기대된다. 따라서 본 연구에서는 폐식용유를 회수하여 알키드 수지를 만들기 위해 에스테르반응을 시켜 제조된 유변성 알키드 수지에 규사를 혼입한 밀입도 투수콘크리트가 비차도용 도로 포장에 적용가능한지에 대한 역학적 특성(강도, 내수성, 화학저항성, 마모저항성, 동결융해저항성, 투수계수)을 평가하였다 실험결과 휨강도는 도로설계기준 4.5MPa에 1.6배의 결과를 보였으며, 내수성 및 화학저항성, 동결융해저항성은 재령 초기에 강도저하현상이 나타났으나, 재령이 증가함에 따라 큰 변화는 보이지 않았다. 그리고 양생온도는 수지의 유리전이온도 특성에 의해 고온에 비해 저온에서 강도증진현상을 보이는 것으로 나타났다. 따라서 도로포장용으로 적용시에는 작업성, 강도 및 내구성 측면을 고려해서 유변성 알키드 수지의 혼입률이 규사 중량대비 10~12%가 적정한 것으로 나타났다