• 제목/요약/키워드: Recycling of wastes

검색결과 584건 처리시간 0.024초

미국의 폐플라스틱 재활용 현황 (Recycling of Post-consumer Plastic Wastes in the USA)

  • 김진현
    • 자원리싸이클링
    • /
    • 제6권2호
    • /
    • pp.70-77
    • /
    • 1997
  • 미국에서의 플라스틱 생산은 93년 현재 317억톤으로 연평균 10%의 증가율을 나타내고 있으며 종류별 사용량은 PET>HDPE.LDPE>PVC>PS>PP의 순서이다. 93년 현재 미국의 도시폐기물 중 폐플라스틱은 약 2,650만톤으로 전체 폐기물 중 8.3wt.% 이며 이중 재활용되는 양은 3.5%인 92만톤에 불과하다. 폐플라스틱의 재활용은 폐플라스틱을 재생하는 방법, 고형화, 액화 및 가스화에 의한 연료화방법, 연소에 의한 에너지 회수 방법으로 나눌 수 있으며 폐플라스틱에 대한 관심의 증가로 92년에는 플라스틱 음료수병의 41%가 재활용되고 있다. 그러나 플라스틱의 재활용시 가장 큰 문제로 수집, 분류 및 정제를 들 수 있는데 혼합 플라스틱의 분리기술이 현실화되지 못해서 현재의 재활용 기술은 비교적 균질한 성분을 대상으로 하고 있으며 공기분류, 하이드로싸이클론, 부상/침전, 탈중합/정제/재중합, 분리용해, 적외선 분석 및 폴리머의 레이저 주사에 의한 분리 등이 연구되고 있다.

  • PDF

연질 폐우레탄 폼의 재활용을 위한 해중합법 개발 (Development of Depolymerization Method on the Recycling of Waste Flexible Polyurethane Foam)

  • 엄재열;이병학;신판우;김용렬
    • 한국환경보건학회지
    • /
    • 제28권2호
    • /
    • pp.41-49
    • /
    • 2002
  • Resource recovery and recycling of materials and products including polyurethanes are viewed as a necessity in today's society. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and physical. In the chemical recycling method, there ate hydrolysis, glycolysis, pyrolysis and aminolysis. This study was carried out glycolysis using new method such as sonication and catalyzed reaction. There are kinds of recycled polyols were produced by current method(glycolysis) but, this study were with catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols and then the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication and catalyzed reaction for the various glycols, increased as: PPG

Characteristics of food waste: water and salinity contents

  • Lee, Jae-Han;Kang, Yoon-Gu;Luyima, Deogratius;Park, Seong-Jin;Oh, Taek-Keun;Lee, Chang Hoon
    • 농업과학연구
    • /
    • 제47권2호
    • /
    • pp.375-380
    • /
    • 2020
  • The high intrinsic water content and salinity of food waste prevent a smooth composting process and consequently cause social, economic and environmental problems. In this study, we investigated the distribution of the water content and salinity in food wastes to obtain useful primary data to ensure adequate and quality recycling. A total of 300 food waste (FW) samples were collected from residential apartments (home generated FW), a wide range of restaurants, i.e., restaurant generated FW that included Korean, Chinese, Japanese and western FWs, and several places that included food waste processing facilities (dehydrated FW cakes). The collected food wastes were oven dried for 48 hours at 80℃ after which the water and salinity contents were analyzed. The results show that the average water content of the FWs was 72.45 ± 10.51%, and the average salinity content was 2.03 ± 0.57%. Furthermore, the salinity of the collected FWs was characterized by where the FW was generated. By location, the salinity concentration of home generated FW was 2.30% while western food had the lowest salinity concentration of 1.18%. However, dehydrated cakes had the highest salinity concentration of 2.84%. Especially, the distribution of the salinity content in food wastes can form the basis for improving the compost quality in food waste recycling.

BIM/GIS을 활용한 건설폐기물관리시스템 개선방안에 대한 연구 (A Study of How to Improve of Building Waste Management Systems Using by 'BIM / GIS')

  • 김혜미;손병훈;김영찬;홍원화
    • Spatial Information Research
    • /
    • 제19권5호
    • /
    • pp.53-62
    • /
    • 2011
  • 최근 전 세계적으로 환경오염이나 자원고갈이 급속히 진전되고 있다. 그 중 건설 산업은 다른 산업의 생산 활동에 비해 막대한 자원 소비 및 대량의 폐기물을 배출하여, 지구의 환경부하를 증대시키는 주요 원인이다. 우리나라에서는 건설폐기물을 재활용하기 위한 기술적, 제도적 기반이 필요함을 인식함에 따라 폐기물 종합관리시스템인 올바로(Allbaro) 시스템을 구축하여 실시간 건설폐기물의 발생과 이동에 따른 처리에 대한 표준화된 정보처리 및 건설폐기물 처리의 투명성 확보 및 업무의 능률향상을 도모하였다. 하지만 시스템의 구성에서 해체 건물에 대한 객관적인 정보가 구축되지 않아 배출자가 폐기물에 대한 정보를 임의로 생산하고 배출함에 따라 정확한 폐기량을 파악하기 힘들고 폐기 후 재활용이라는 한계점을 벗어나지 못하고 있다. 따라서 본 연구에서는 기존 건설폐기물관리시스템의 장단점을 분석하고 BIM/GIS를 활용하였을 시의 건설폐기물관리시스템 개선방안에 대해 제안하고자 한다.

수도권 및 강원지역 도시고형폐기물의 조성과 물리·화학적 특성연구 (The study of the Composition and Physico-chemcal Characteristics of MSW in urban and gangwon area)

  • 이건주
    • 유기물자원화
    • /
    • 제16권3호
    • /
    • pp.65-74
    • /
    • 2008
  • 본 연구에서는 서로다른 4지역의 도시 생활 쓰레기의 성상 및 물리 화학적 조성을 조사 하였다. 생활 쓰레기 연료화시설 설치 및 자료확보 차원 매립장 관리차원에서 매우 필요한 연구이다. 평균 밀도는 $79{\sim}199.8kg/m^3$ 범위내의 결과를 얻었다. 생활 쓰레기는 8.87%의 음식물류, 38.8%의 종이류, 34.12%의 플라스틱류 및 비닐류, 7.16%의 섬유류, 0.96%의 목재류 1.3%의 고무 및 가죽류 등으로 구성되어 있다. 생활쓰레기의 대부분은 음식물, 종이류, 플라스틱류 등으로 이루어져 있으며 94% 정도가 가연 성분이다. 삼성분 분석에서는 17.38%의 수분 및 69.03%의 가연분 그리고 6.24%의 회분으로 이루어져 있다. 원소분석결과는 탄소 산소 수소 순으로 이루어져 있다. 생활쓰레기의 저위 발열량은 2973.8kcal/kg 이며 고위 발열량은 5209.94 kcal/kg 결과를 얻었다.

  • PDF

강원지역 도시폐기물의 물리·화학적 특성 연구 (The Study of Physico-chemcal Characteristics of Municipal Solid Waste (MSW) in Gangwon Area)

  • 이건주
    • 유기물자원화
    • /
    • 제17권2호
    • /
    • pp.101-111
    • /
    • 2009
  • 본 연구에서는 강원지역의 도시 생활 쓰레기의 성상 및 물리 화학적 조성을 연구하였다. 생활 쓰레기 자원화시설 설치 및 자료확보 차원, 매립장 관리차원에서 본 연구는 필요한 연구이다. 폐기물의 평균 밀도는 $101.8{\sim}199.8kg/m^3$ 범위내의 결과를 얻었다. 생활 쓰레기는 30.7%의 음식물류, 36.3% 의 종이류, 15.8%의 플라스틱 및 비닐류, 1.9%의 섬유류, 3.2%의 목재류 1.5%의 고무 및 가죽류 등으로 구성되어 있다. 생활쓰레기의 대부분은 음식물, 종이류, 플라스틱류 등으로 이루어져 있으며 90% 정도가 가연 성분이다. 삼성분 분석에서는 44.6%의 수분 및 47.4%의 가연분 그리고 7.7% 의 회분으로 이루어져 있었다. 원소분석결과는 탄소, 산소, 수소 순으로 많았다. 생활쓰레기의 저위 발열량은 2,631kcal/kg 이며 고위 발열량은 3,310 kcal/kg 이었다.

음식물찌꺼기 소멸효율 재고를 위한 발효균 및 발효 공정 최적화 연구 (Studies on the Selection of Microorganism for Food Wastes and Optimization of Fermentation Process)

  • 김영권;홍명표;김명진;홍석일;박명석;김종석;장호근
    • 유기물자원화
    • /
    • 제6권2호
    • /
    • pp.95-112
    • /
    • 1998
  • 186종의 후보미생물을 대상으로 우수발효(소멸)균 선발시험을 실시한 결과, Rhizopus sp., Galactomyecs sp., Pichia sp., Hyphopichia sp.로 구성되는 4종의 발효균을 선발하였다. 이들 발효균을 이용한 발효(소멸)공정 시험결과, 내용적 50L의 발효조에 대해서, BIO-CHIP Volume 25-30L, BIO CHIP입도 2.0-6.0mm, 송풍량 200-280L/min, 교반강도 24 rpm, 온도 $30-45^{\circ}C$가 최저 발효조건인 것으로 나타났으며, 이러한 조건에서 1일 1kg의 음식물을 30일간 투입하면서 소멸기를 가동한 결과, 93%의 소멸율을 나타내었다. 소멸기 배출물의 재활용 가치를 평가하기 위하여, 발아율 시험을 실시한 결과, 배출물을 적절하게 희석하여 사용하면, 퇴비로서의 가치가 매우 양호한 것으로 나타났다.

  • PDF

폐기물로부터 메탄발생량 예측을 위한 Sigmoidal 식과 1차 반응식의 통계학적 평가 (Statistical Evaluation of Sigmoidal and First-Order Kinetic Equations for Simulating Methane Production from Solid Wastes)

  • 이남훈;박진규;정새롬;강정희;김경
    • 유기물자원화
    • /
    • 제21권2호
    • /
    • pp.88-96
    • /
    • 2013
  • 본 연구의 목적은 고형폐기물의 메탄발생 특성을 나타내기 위한 1차 반응식과 S형태 식들의 적합성을 평가하는 것이다. S형태 식은 수정 Gompertz와 Logistic 식을 사용하였다. 모델의 적합성을 평가하기 위해 잔차제곱합, 표준제곱근 오차, Akaike's information criterion 등의 통계분석을 실시하였다. AIC (Akaike's information criterion)는 모델의 변수 개수 차이에 따른 모델 적합성을 비교하기 위하여 적용하였다. 1차 반응식의 경우 지체기를 고려하지 않을 때보다 고려하였을 경우 잔차제곱합과 표준제곱근 오차는 감소하는 것으로 나타났다. 그러나 1차 반응식의 경우 S형태 식보다 AIC가 상대적으로 높게 나타났다. 이는 S형태 식이 1차 반응식보다 메탄발생특성을 나타낼 때에 더욱 적합한 것으로 사료된다.

생물자원 폐기물을 활용한 친환경 가죽염색(III): 매리골드와 편백나무 잎 추출물의 복합염색에 의한 기능성 부여 (Eco-friendly Leather Dyeing Using Biomass Wastes(III): Imparting Functionality by Combination Dyeing with Marigold (Tagetes erecta L.) and Hinoki Cypress(Chamaecyparis obtusa) Leave Extracts)

  • 이건희;신윤숙
    • 한국염색가공학회지
    • /
    • 제31권1호
    • /
    • pp.1-13
    • /
    • 2019
  • In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.

혐기성 폐기물매립지에 있어서 수분이 매립폐기물의 안정화에 미치는 영향 (Effect of Moisture on Stabilization of Municipal Solid Wastes in Anaerobic Landfill)

  • 김혜진;김종호;오동익;김석찬;이남훈;김낙주
    • 유기물자원화
    • /
    • 제13권1호
    • /
    • pp.124-130
    • /
    • 2005
  • 매립은 폐기물의 최종처분방법으로 광범위하게 이용되며, 매립된 폐기물은 미생물의 활동에 의해 분해된다. 미생물에 의한 생분해는 수분함량, 산화환원전위, pH, Alkalinity, 황산염, 영양물질과 미량원소, 방해인자, 미량이온, 온도와 같은 여러 인자에 의해 영향을 받는다. 특히, 수분은 미생물의 활성에 주요한 인자이다. 본 연구에서는 수분이 고형폐기물(MSW)의 분해에 미치는 영향을 조사하여 분석하였다. 이를 위해 총 8기의 모의매립조에 고형폐기물을 충전하였고, 수분함량을 20, 30, 40, 50% 4개로 하여 운전하였다. 그 결과 수분함량이 높을수록 $CO_2$의 농도가 높았고, 매립가스 또한 많이 발생 하였다. 이는 수분함량이 높을수록 미생물 분해가 효과적임을 의미한다.

  • PDF