• 기술혁신학회지
• /
• 제2권2호
• /
• pp.290-308
• /
• 1999

In this study a system for the treatment or recyling of organic wastes from both urban and rural area was recommended. It was developed based on the resource recovery system regarding human being by four tectnologies; forage, methane production, high-grade composting and complete decomposition. High quality compost can be produced by combining several kind of wastes produced from urban and agricultural areas. High quality compost must possess not only general characteristics of ordinary compost, but also a superior ability to improve the soil properties and must contain more nutrients for plant. Cedar chips were recommended as the main bulking agent to adjust moisture contents and air permeability. Charcoal and zeolite can be used not only as the second bulking agent but also as fertilizer for improve the soil amendment. Complete decomposition of organic wastes is defined by organic matter being completely converted to $CO_2$ and water. All the input water was evaporated by the heat produced through the oxidation of organic matter, In the present study, the complete treatments were successfully achieved for Shochu wastewater, swine wastes, thickened excess sewage sludge, wastes produced by Chinese restaurant and anaerobic digested sludge. First of all, recycling center of organic wastes should be established for the protect the environments and effective recovery of organic resources. This may means the way to derive the recovery of human value.

• 유기물자원화
• /
• 제21권4호
• /
• pp.82-87
• /
• 2013

게껍질에 흡착된 은 이온의 탈착과 재생특성에 관한 연구가 최적의 탈착제로서 선정된 질산을 이용하여 수행되어졌다. 1.0M의 질산농도에서 은 이온의 탈착율은 96%로서 가장 높았다. 또한, 투입된 흡착제의 양과 탈착제의 부피로서 정의되는 S/L비가 1.0보다 작을 때에는 대부분의 은 이온이 탈착되어졌으며 대부분의 탈착 공정은 60분 내에 일어났다. 그리고 재사용된 게껍질을 흡착제로 다시 이용하였을 때 2회까지는 92%의 은 이온 탈착율을 유지하였다.

• 한국주조공학회지
• /
• 제25권5호
• /
• pp.203-208
• /
• 2005

The main emphasis of this study is to optimize the process variables for manufacturing aluminum foam materials by direct foaming of remelted aluminum scraps. Aluminum foams were fabricated from two different raw materials, pure aluminum and used beverage cans. For both cases, $TiH_{2}$ was used as a foaming agent. Calcium was added as a thickener for the foaming of pure aluminum and no thickener was added for that of used beverage Cans because the pre-existing oxides of the used beverage cans are used as a thickener. Calcium and $TiH_{2}$ content varies from 0.5wt.% to 2.0wt.% and from 0.5wt.% to 1.5wt.%, respectively. The processing conditions, such as the effect of calcium on the melt viscosity, foaming temperature, and the optimum amount of the foaming agent with regard to the melt viscosity were discussed.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.34-41
• /
• 2015

Recovered paper has been widely used as a main raw material of papermaking in Korea. Recycling of recovered paper helps to reduce production cost and preserve an environment. To recycle recovered paper efficiently, de-inking is a key process in recycling mills. De-inking process would be affected by various influencing factors such as the type of de-inking agent, mixed ratio of recovered paper, season, and process conditions. In this study, fatty acid and nonionic surfactant were used as the de-inking agent in froth-flotation process of mixed recovered paper. De-inking properties of mixed recovered paper were investigated according to the addition level of each chemical. Nonionic surfactant had a small effect on de-inking efficiency of mixed recovered paper due to decreased reject. As the additional level of fatty acid increases, fragmented ink particles increased and then optical properties of recycled paper decreased because fragmented ink particles adsorbed onto the fiber surface.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.1-10
• /
• 2018

제철 공정에서 발생되는 부산물인 용선 슬래그를 재활용하여 활성제를 융합한 표층처리공법용 고화재를 개발하는 연구를 수행하였다. 연구 목적은 폐기 또는 매립되는 제철소의 용선 슬래그를 재활용하여 자원 순환 및 고화재의 기능성을 부여하고 토양의 유실, 침하, 싱크홀 등의 기초지반의 강도 및 내구성을 향상하여 표층토양의 문제점 해결하는데 있다. 이를 위하여 용선슬래그 및 활성재를 융합한 고화재를 가지고 압축강도, 유해물질용출시험, 투수계수 시험을 통해 용선슬래그의 고화재 원료로서의 사용 가능성을 평가하였다. 압축강도 시험 결과 고화재 혼합률이 12%인 고화토의 양생 28일 강도의 값이 각각 0.93, 0.96, 1.3MPa의 값으로 본 연구 개발 고화재의 소요강도 값인 1MPa에 만족하는 값을 나타내었으며, 투수계수의 경우에는 고화재 혼합률 12%에서 각각 $4.1{\times}10^{-8}$, $7.0{\times}10^{-7}$, $1.7{\times}10^{-7}cm/sec$로 최소값을 나타내었다. 또한 유해물질용출시험 결과 6가 크롬 항목에서 미소량 검출되었지만 함유기준을 만족하였으며, 나머지 항목에서는 중금속이 용출되지 않았다.

• 자원리싸이클링
• /
• 제15권2호
• /
• pp.50-57
• /
• 2006

해양에서 발생하는 목질 폐기물의 재활용 방안의 일환으로 폐 어류 상자를 원료로 활성탄을 제조하는 방안을 검토하였다. 폐 황산을 활성화제로 하여 온도에 따른 활성탄의 흡착능의 변화를 검토한 결과 실험조건에서 $650^{\circ}C$부근에서 최대의 흡착능이 관찰되었으며 이보다 온도가 상승할 경우 열적 분해로 인해 흡착능이 감소하는 것으로 나타났다. 활성시간은 약 120분 정도가 적절한 것으로 파악되었으며 $550^{\circ}C$ 및 60분의 활성화 조건에서 원료 물질과 활성화제의 무게비가 1:3의 조건일 때 최대 흡착능이 관찰되었다. 활성화 조건은 황산의 농도가 1.2M일 때 최적인 것으로 조사되었으며 활성화제의 종류에 따른 활성능을 비교한 결과 황산은 질산에 비해 활성탄의 흡착능면에 있어서는 그 효과가 더욱 큰 것으로 파악되었으나 수율에 미치는 영향은 두 경우 뚜렷한 차이가 없는 것으로 나타났다. 제조된 활성탄은 중성 영역에서 분산도가 높은 것으로 관찰되었으며 전 pH 영역에 걸쳐 음의 전하를 띠는 것으로 파악되어 금속 이온 함유 폐수에 효과적인 흡착제로 사용될 수 있을 것으로 사료되었다.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.44-50
• /
• 2015

전기자동차의 수요가 증가함에 따라 리튬이온전지의 생산량도 증가하여 효율적인 전지 재활용 기술이 요구된다. 폐리튬이온전지를 재활용하는 방법에는 크게 건식제련과 습식제련에 기반한 방법으로 나눌 수 있다. 본 연구에서는 하이브리드 자동차에 사용된 폐리튬이온전지의 양극활물질을 습식제련에 기반한 암모니아침출법을 이용하여 활물질 내의 유용금속인 Ni, Mn, Co의 침출거동을 조사하였다. 물리적으로 처리된 활물질의 입자크기는 -65 mesh이며, 주된 원소는 14.0 wt% Ni, 13.0 wt% Mn, 5.7 wt% Co이다. 암모니아, 환원제 (아황산암모늄), pH 완충제 (탄산암모늄 혹은 황산암모늄)의 존재하에 각 금속의 침출거동을 확인하고, 또한 침출시간과 온도에 따른 침출률의 영향도 조사하였다. 환원제의 존재는 Ni과 Co의 침출률 향상을 위해 필수적이다. 암모니아침출법은 산침출법과 달리 Ni/Co와 Mn의 선택적인 침출이 가능하여 침출된 유용금속을 분리하는 단계를 줄일 수 있고, 산침출 후 수반되는 침전과정 시 필요로 하는 추가 염기성 시약의 사용을 줄일 수 있다.

• 한국축산시설환경학회지
• /
• 제3권1호
• /
• pp.19-26
• /
• 1997

Composting has recently become popular as a means of recycling swine manure into products for sale off the farm, but bulking agent(usually sawdust) are expensive and availability is limited. This experiment was conducted to investigate the effect of fly ash as a bulking agent on the composting of swine manure and to analyze the effective substitution rate of fly ash mixed with swine manure for sawdust. Fly ash was able to be substituted for sawdust and the most effective substitution rate are 50% of sawdust. According to the results the advanced research and development are required, the effect of swine manure with fly ash on the soil properties, forage composition and animal performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.179-180
• /
• 2018

Color concrete is produced by adding white portland cement and coloring agent. In Korea, colorant added to color concrete is expensive, durability evaluation in external environment is not verified and there is a tendency to avoid color concrete pouring. Red mud with a water content of 50% was prepared in liquid form using appropriate mixing water and additives for recycling as a coloring agent, the liquefied red mud manufactured was intended to show the possibility of using color concrete. In this paper, the application of red mud as an industrial by - product as a coloring agent for color concrete was investigated for the practical use of liquefied red mud by liquefying red mud and producing retaining wall block. As a result, it was found that all of the specifications stipulated in SPS-KCIC0001-0703 are satisfied.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.245-250
• /
• 2015

Recycling of ethylene-propylene-diene terpolymer (EPDM) scrap was tried by blending with polypropylene (PP). EPDM scrap powder was prepared by shear pulverization process at high temperature, which may lead to selective chain scission induced by difference in the critical elastic coefficient. On the other hand, EPDM scrap powder was prepared by adding a selected reclaiming agent during shear pulverization process at high temperature. Terpene as a bonding agent was then introduced to improve adhesion property. PP, used as a matrix for manufacturing thermoplastic elastomer, was modified by the incorporation of dicumyl peroxide and maleic anhydride. The functionalized EPDM and modified PP were blended and cured dynamically at $190^{\circ}C$. The blend materials prepared in this study showed the comparable results to those of conventional TPE in terms of tensile and flow properties. Also, the odor component of recycled EPDM was analyzed using GC-MS.