• 제목/요약/키워드: Recycled-Paint

검색결과 10건 처리시간 0.023초

재활용 범퍼의 효율적인 적용을 위한 신재의 최적 배합비율에 관한 연구 (Study on a recipe of recycled bumper and pristine materials for application of vehicle parts)

  • 손영곤
    • 한국산학기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.175-180
    • /
    • 2016
  • 폐 자동차에서 떼어낸 범퍼는 분쇄 및 도장 (paint)제거 공정을 거친 후 신재 (pristine materials)와 일정 비율 혼합하여 자동차 부품을 제조하는 공정에서 재활용된다. 본 연구에서는 신재와 도장이 제거된 범퍼 분쇄품을 일정 비율 혼합하여 혼합비에 따른 기계적인 물성 및 화학적인 성질을 연구하였다. 신재에 범퍼 분쇄 품을 혼합하였을 때 인장강도 및 굴곡탄성율과 같은 강성은 두 물질의 조성 평균으로 나타났지만, 충격강도와 파단 신율과 같은 인성 (toughness)은 조성 평균보다 낮은 negative deviation을 보였다. 이는 두 물질간의 혼화성이 부족하여 발생하는 결과라는 것을 FT-IR 분석을 통하여 알 수 있었다. 범퍼 분쇄품의 혼합 비율이 30% 이상에서 두 물성이 급격히 저하되었다. 이를 활용하면 최적의 배합 비율을 선정할 수 있을 것이다. 또한 이전 연구에서 밝힌 바와 같이 도장 제거율을 80 % 수준까지는 달성하기는 쉽지만 나머지 20%를 제거하기 위하여 많은 노력과 에너지가 소요되는 바, 도장이 제거되지 않은 분쇄품과 도장이 제거된 분쇄품의 혼합 비율에 따른 기계적인 물성에 대하여 실험하였다. 도장이 제거되지 않은 범퍼 분쇄품이 소량만 첨가되어도 기계적인 물성은 급격히 저하가 되어 폐 범퍼를 재활용하기 위해서는 도장 제거 공정이 매우 중요하다는 사실을 알 수 있었다.

폐기물 자원회수 향상을 위한 친환경 폐페인트 처리프로세스 개발 (Development of a Sustainable Waste Paint Treatment Process for Waste Resource Recovery Improvement)

  • 문종욱;황석호;김대영
    • 한국건설관리학회논문집
    • /
    • 제23권1호
    • /
    • pp.73-82
    • /
    • 2022
  • 국내 지정폐기물 중 하나인 폐페인트는 현재 전량 소각 방법으로 처리되고 있으며, 다른 폐기물에 비해 재활용도 거의 이루어지지 않고 있어, 자원이 부족한 우리나라에 엄청난 자원의 손실뿐 아니라 소각으로 인한 에너지원의 낭비, 그리고 소각 시 발생하는 대기오염 등의 환경문제도 유발하고 있다. 이를 위해 본 연구에서는 기존의 폐페인트의 소각처리법을 탈피하여, 온도 조절에 의한 증발·응축, 열분해를 통해 전처리 조작하는 방법으로 전환하고, 이때 발생하는 잔재물을 활용하여 일정한 형상(과립형 및 분말형)으로 성형한 후 이를 대체에너지 열원으로 재활용할 수 있는 친환경(지속가능한) 폐페인트 처리프로세스를 제시하고자 한다. 폐페인트를 처리하는 새로운 방법과 재활용하는 기술개발이 이루어지고 보급된다면 환경적·경제적 면에서 그 효과가 클 것으로 기대한다.

탄소 재료를 사용한 전자파 차폐 무기계 도료 개발에 관한 실험적 연구 (Experimental Study on the Development of Electromagnetic Pulse Shielding Inorganic Paint Using Carbon Materials)

  • 장경필;송태협
    • 한국건설순환자원학회논문집
    • /
    • 제11권3호
    • /
    • pp.234-243
    • /
    • 2023
  • 전자파(EMP)는 고출력 전자파의 총칭으로 핵무기에서 발생하는 EMP, 비핵 EMP, 자연현상에 의해 발생하는 EMP로 분류된다. 전자파는 통신기기, 휴대폰, 컴퓨터, TV, 교통수단 등 전자기적 요소를 지닌 모든 전자장치에 치명적인 손상을 줄 수 있는 수단이다. 본 연구에서는 탄소 재료를 이용한 EMP 차폐 무기 도료 개발을 위해 탄소 재료의 종류와 함량에 따른 도료의 EMP 차폐성능 평가를 수행하였다. 도료 제조에 사용된 원재료들의 상용성 및 분산성 향상을 분석하기 위해 약 27종의 배합으로 총 2회에 걸쳐 실험을 진행하였고, 전기저항 측정법을 이용하여 EMP 차폐 효과를 평가하였다. 본 연구를 통해 개발된 EMP 차폐 도료를 차폐 콘크리트에 적용한 결과 약 25 dB에서 최대 40 dB까지 차폐성능이 향상되는 것을 확인하였다.

기계적 방법과 화학적 방법을 혼합한 폐범퍼 도장 제거 기술 개발 (Developent of a new technique removing paint from recycled car-bumper)

  • 하이디 크루즈;손영곤
    • 한국산학기술학회논문지
    • /
    • 제15권5호
    • /
    • pp.3298-3303
    • /
    • 2014
  • 자동차 폐범퍼를 재활용하기 위해서는 도장된 페인트를 효율적으로 제거하는 기술이 매우 중요하다. 현재까지 개발된 방법들은 환경오염을 유발할 수 있는 화학적 방법이 물리적 방법에 비해 도장 제거율이 높다고 알려져 있다. 이 연구에서는 물리적 제거법의 낮은 도막 제거율을 높이기 위하여 화학적 제거법과 물리적 제거법을 혼합하여 용매의 사용량을 줄이고 도막의 제거율을 높이는 방법을 시도하였다. 용매를 침지하는 과정에서 기계적인 교반이 도장 제거율을 높임을 확인하였고, 중간 매체로 고체입자를 혼합하였을 때 매우 높은 도장 제거율을 보임을 관찰하였다. 이로서 적절한 방법으로 화학적인 방법과 물리적인 방법을 혼합하면 용매의 양을 줄이면서 도장 제거율을 높일 수 있음을 확인하였다.

화학적 박리방법과 ESPI에 의한 재생된 폴리올레핀 범퍼수지의 물성평가 (Characterization of Polyolefin Bumper Recycled by Chemical Removal Method using Electronic Speckle Pattern Interferometry)

  • 김현경;강기수;김경석;홍진후
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.295-298
    • /
    • 1997
  • Recycl ing of PP/EPR based bumper coated with polyester urethane paint has been per formed by chemical decoating method. Electronic Speckle Pattern Interferometry (ESP11 has been applied to characterize the deformation of polyolef in based bumper. In additon, physical properties and processability of recycled materials have been investigated by dynamic mechanical thermal analysis, impact test and melt flower index measurement. The results show that the deformation ratio of recycled material is higher than that of virgin one. The morphological change of EPR, degree of distribution and dispersion during the recycling process seem to be the most important factor for the deformation and the mechanical properties of recycled materials. The experimental results obtained show that ESPI is very powerful technique to study the thermal mechanical property of polyolefin bumper system.

  • PDF

반도체 제조공정에서 발생하는 실리콘 슬러지의 이산화티타늄 코팅을 통한 안료 및 도료 소재로의 응용 (Application of Silicon Sludge from Semiconductor Manufacturing Process as Pigments and Paints through Titanium Dioxide Coating)

  • 추연룡;사민기;김지원;제갈석;김찬교;김하영;이송;심형섭;윤창민
    • 유기물자원화
    • /
    • 제31권3호
    • /
    • pp.35-41
    • /
    • 2023
  • 본 연구에서는 반도체 제조공정에서 발생하는 실리콘 슬러지에 금속산화물인 이산화티타늄을 코팅하였으며, 이를 안료 및 도료의 소재로 응용하였다. 상세히는, 불순물이 제거된 판상형의 실리콘 슬러지 분말에 졸-겔법을 통해 이산화티타늄을 코팅하였다. 안료 및 도료의 소재로서 응용 가능성을 확인하기 위해서 친수성 투명 코팅제에 분산하여 페인트를 제조한 후 유리 기판에 분사하였다. 그 결과, 이산화티타늄의 도입으로 인한 발림성 향상과 하얀색의 발현을 확인할 수 있었다. 본 연구를 통해서 실리콘 슬러지에 이산화티타늄을 코팅함으로써 발림성 및 친수성이 향상됨을 확인하였으며, 이를 통해서 반도체 공정에서 발생하는 실리콘 슬러지가 안료 및 도료의 소재로서 응용 가능성을 확인하였다.

단열골재 개발을 통한 동토방지 기술개발에 관한 연구 (A Study on the Development Lightweight Aggregate using Recycled-Paint for Reduction in Freezing Ground)

  • 문종욱;백민호
    • 한국방재학회 논문집
    • /
    • 제10권4호
    • /
    • pp.47-54
    • /
    • 2010
  • 지정폐기물인 폐페인트를 이용한 단열골재 개발을 위한 자료를 제시하기 위하여 이를 위한 실험으로 함수비, 진밀도, 액성한계, 소성한계, 마모감량, 모래당량, 체가름 시험을 진행하였다. 함수비 시험은 80:20의 배합이 1.4이고, 쇄석 골재만 사용한 것은 1.0으로 폐페인트 단열골재의 용적비가 증가하면서 함수비의 증가도 많았다. 또한, 진밀도 시험은 혼입율의 증가에 따라 점점 상승하였고, 흡수율도 증가하였다. 이는 골재와 폐페인트의 특성상 발생되는 공극분포의 차이로 인한 현상으로 판단된다. 모래당량과 마모감량 실험에서는 마모감량은 쇄석골재만 사용한 경우는 13.5이고 20% 혼입한 경우는 14.4로 증가하지만, 이는 단열골재의 약한 조직으로 인한 현상이라 판단된다. 이러한 실험으로 볼 때, 도로공사 시방서의 동상방지층은 모래당량 20, CBR 10으로 만족하도록 규정하고 있어 본 실험은 전 배합에서 모두 품질기준에 만족하는 결과를 보였다. 현재 폐페인트는 단순 매립용하거나, 소각 처리되는 현 실정에서 골재로 활용할 수 있게 됨으로써 천연골재의 부족이나 자원의 낭비를 해소할 수 있을 것으로 파악된다. 기존의 자갈보다 단열효과가 뛰어나고, 가벼우며, 단단한 단열골재를 사용함으로써 재활용이 활발할 것으로 예상된다.

일부 한국 성인 여성들의 혈중 PCBs 농도 및 그 노출요인의 연구 (The Concentrations of PCBs in the Serum and Theri Predictors of Exposure n Korean Women)

  • 민선영;정문호;이강숙;노영만;구정환
    • 한국환경보건학회지
    • /
    • 제26권2호
    • /
    • pp.97-107
    • /
    • 2000
  • PCBs [Polychlorinated biphenyls] are halogenated aromatic compounds with the empirical formula C12H10-nCln(n=1~10), and are a mixture of possible 209 different chlorinated congeners. PCBs were widely used as dielectric fluids for capacitors, transformers, plasticizers, lubricant inks, and paint additives. once released into the environment, PCBs persist for years because they are so resistant to degradation. In addition to their high degree of lipophilicity. In 1970s, the worldwide production of PCBs seem to be still in use. The environmental load of PCBs was prohibited since 1983 in Korea. In spite of these actions, many PCBs seem to be still in use. The environmental load of PCBs will continue to be recycled through air, land, water, and the biosphere for decades to come. This study was conducted to measure the concentrations of PCBs I the serum samples of 112 women by GC/MSD(Hewlett Packard 5897 Gas Chromatography-Mass Chromatography Detector) and CG/ECD(Hewlett Packard 5890 series-II gas chromatography-Electron capture detector, U.S.A). The main results of this study were as follows; The mean and standard deviation of serum PCBs were 3.613, 0.759 ppb, respectively and median of it was 3.828 ppb. The correlation coefficients of the concentrations of 13 PCB congeners ranged from 0.7913 to 0..9985 and were significantly correlated between each items(p=0.0001). The PCB concentrations were positively associated with age(simple linear regression; R2=0.86, =0.08023, p<0.001) and with total lipids in serums(simple linear regression; R=0.7058, =0.00486, p<0.001). The age adjusted model (Y=$\beta$0+$\beta$1age+$\beta$2X) was applied for possible predictors of PCBs levels in serum. For BMI(Body Mass Index), major residential area, and fish, meat, and dairy consumption, there was no association with PCBs levels, Also there was negative association for the number of pregnancy and lactation period with PCBs levels.

  • PDF

일부 한국 성인 여성들의 혈중 내분비계 장애물질 농도 및 그 노출요인의 연구 (The Concentrations of Endocrine Disrupter (PCBs and DDE) in the Serumand Their Predictors of Exposure in Korean Women)

  • 민선영;정문호
    • 한국환경보건학회지
    • /
    • 제27권2호
    • /
    • pp.127-137
    • /
    • 2001
  • Polychlorinated biphenyls(PCBs) are halogenated aromatic compounds with the empirical formula $C_{12}$ $H_{10-n}$C $l_{n}$(n=1~10), and are a mixture of possible 209 different chlorinated congeners. PCBs were widely used as dielectric fluids for capacitors and transformers, plasticizers, lubricant inks and paint addirives. Once released into the environment, PCBs persist for years because they are so resistant to degradation. In addition to their persistence in the environment, PCBs in ecological food chains undergo biomagnification because of their high degree of lipophilicity. In 1970s, the worldwide production of PCBs was ceased and the import of PCBs was prohibited since 1983 in Korea. In spite of these actions, many PCBs seems to be still in use. The environmental load of PCBs will continue to be recycled through air, land, water, and the biosphere for decades to come. This study was conducted to measure the concentrations of PCBs in the serum samples of 112 women by GC/MSD and GC/ECD. The main results of this study were as follows. 1. PCBs were detected in all samples. The mean $\pm$SD levels of PCBs in the serum were 3.613$\pm$0.759 ppb, and median were 3.828 ppb. 2. The correlation coefficients of the concentrations of 13 PCB congeners were from minimum, 0.7913 to maximum, 0.9985, and all was significant(p=0.0001). The correlation coefficient between the concentrations of PCBs and p,p'-DDE was 0.9641(p=0.0001). 3. There was a positive association between age and PCBs' concentrations (simple linear regression ; $R^2$=0.86, $\beta$=0.08023, p<0.001). 4. There was a positive association between total lipids in the serum and PCBs' concentrations (simple linear regression ; $R^2$=0.7058, $\beta$=0.00486, p<0.001). 5. For possible predictors of PCBs and p,p' -DDE levels in the serum, age adjusted model (Y=$\beta$$_{0}$+$\beta$$_1$age+ $B_2$X) was applied. For BMI, major residential area, wether to eat caught fish by angling, where to eat caught fish by angling(by parents in the past), fish consumption, meat consumption, meat consumption, and dairy consumption, there was no association. For total conception frequency and lactation frequency and lactation period, there was negative association.ion.

  • PDF

라이다 반사형 중공구조 검은색 물질의 개발 및 코어 에칭 폐액 재활용을 통한 반도체용 에폭시 몰딩 컴파운드 응용 (Synthesis of LiDAR-reflective Hollow-structured Black Materials and Recycling of Their Etched Waste for Semiconductor Epoxy Molding Compound)

  • 김하영;김민정;김지원;제갈석;박선영;정종문;윤창민
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.5-14
    • /
    • 2023
  • 연구에서는 실리카/티타니아 코어/쉘(STCS) 물질을 기반으로 환원 및 에칭을 통해 근적외선 반사율을 향상시킬 수 있는 라이다 반사형 중공구조 검은색(B-HST) 물질을 제조하였다. 또한, 에칭 폐액을 수거 및 재활용하여 합성한 실리카(e-SiO2) 물질을 반도체 에폭시 몰딩 컴파운드용(EMC) 필러 소재로서 응용하였다. 상세히는, 연속적인 졸-겔법, 환원법 및 초음파법을 통해 제조한 B-HST 물질은 높은 NIR 반사율(31.1%)과 실제 검은색 페인트와 유사한 명도(L*=13.2)를 나타내었으며, 이를 통해 성공적으로 라이다에 인식될 수 있는 소재가 제조되었음을 확인하였다. 추가적으로, B-HST 물질의 합성 과정에서 코어 실리카를 에칭하여 추출한 실라놀 전구체를 포함하는 에칭 폐액을 수거한 뒤, 졸-겔법을 통해 균일한 필러용 실리카로 합성하였으며, 에폭시 고분자 및 카본블랙과의 혼합을 통해 반도체 패키지용 소재인 EMC로 제조하였다. 실험으로 제조된 EMC는 상용화된 EMC 제품과 유사한 물리적-화학적 특성을 나타냄을 확인할 수 있었다. 본 연구 결과를 통해 물질의 합성과 효과적인 재활용법의 설계를 통하여 4차 산업시대에 부합하는 고부가 가치 소재들인 자율주행차 차량용 검은색 물질과 반도체용 EMC 물질들을 성공적으로 제조하고 미래 산업에서의 응용 가능성에 대해 제시하였다.