• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• Archives of design research
• /
• v.13 no.4
• /
• pp.33-41
• /
• 2000

More recently, the ecocide like an environmental shocks of acid rain, oil spills and now the ozone layer have driven home the fact that we're all responsible for looking after our natural environment and threaten the our right to live. At such a situation enterprises has been to develop techniques of enhancing environment friendly design. However it is difficult to producing environment friendly product - especially at electronic product like a high accumulated thing and produced with a small amount - while they know the importance of environment. Because of a direct and actual disadvantage of enterprise and customer. Moreover it is rare and negative for physical point that an adaptation case of recycled material or natural one for designing. Therefore it is important to positive consideration and action of design process for the nature. In this paper the focus of interest is find out the active and real environmental friendly design practice scheme as a designer and understanding of basic of the environmental friendly design for a coexistence of the enterprise, customer, and environment.

• 한국정보교육학회:학술대회논문집
• /
• 2010.08a
• /
• pp.75-83
• /
• 2010

In this paper, A study about using Web 2.0 tools for school academic calendar can be managed systematically and effectively. Academic Calendar of elementary school as a whole displays a calendar and is managed and operated as a traditional academic calendar management system. Academic Calendar of the existing system configuration and operating primarily to teachers, parents, students, and participation in the sharing of information is inefficient. As a result of openness and sharing of information, the user is at the core of the participating elementary school academic calendar to take advantage of Web 2.0 to design and implement management systems were applied experimentally. School Calendar Web 2.0 tools used to manage the teachers, parents, students, seamless communication and sharing of information available and The school year schedule is repeated almost the same characteristics because it has very great significance of the information has recycled.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.24-32
• /
• 2011

In ubiquitous environment, the analysis for student's learning behaviour is essential to provide students with personalized education. SCORM(Sharable Contents Object Reference Model), IMS LD (Instructional Management System Learning Design) standards provide the support function of learning design such as checking the progress. However, in case of applying these standards contain many problem to add or modify the contents. In this paper, We implement the system that manages the learner behaviour by hooking the event of web browser. Through all of this, HTML-based content can be recycled without any additional works and the problems by applying the standard can be improved because the store and analysis of the learning result is possible. It also supports the ubiquitous learning environment because of keeping track of the learning result in case of network disconnected.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2001.10a
• /
• pp.192-206
• /
• 2001

A major challenge in the transition from conventional to organic production in a grain intensive region such as the Com Belt legion of the U.S.A. is how to profitably select and manage a crop relation. The opportunity cast of forgoing grain production for forage and green manure crops is significant. Many organic researchers and writers emphasize the need to bring an animal enterprise into the farming system for diversification and enhanced labor utilization. Livestock also add value to grain and forage crops to offset decreased grain production and can recapture nutrients used in crop production that can be recycled through manure. In grain intensive regions, organic farmers should consider swine production as a natural fit for the farming system. Swine are very efficient and adaptable animals that can add value to both grain and forage crops. While somewhat lacking, there is a reasonable body of literature on organic and sustainable swine production. However, there is relatively little specific information available to organic farmers to assist in the initial decision to enter organic swine production and to evaluate marketing alternatives. The primary focus of this paper is to give some background on organic animal production(emphasis on swine) in the Central United States and outline production and marketing decisions and considerations, relative to market trends, demographics and standards(U.S.). At the farm level, decisions must be made regarding resources, such as land, labor, financial and social capital, all relative to opportunities, all in the context of the standards and market forces beyond the farm. At the personal level the farmer must also make decisions about convictions regarding organic or environmentally friendly agriculture, willingness to change, impacts on lifestyle and family, and the transition to organic methods within the planning horizon of the farmer and the family business.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.758-765
• /
• 2016

This study analyzed for the radioactive shielding wall, which shields the medical linear accelerator. This allows to evaluate the level of waste with respect to the shield wall, which accounts for more than half of the cost of dismantling later linac facility. In addition, by analyzing the waste processing method according we discuss the way to obtain the benefits in terms of dismantling cost. Results of the simulate, the amount sufficient to screen the amount of neutron radiation occurring in the shielding wall linac was measured. And neutron activation analysis results were analyzed nuclides more than about 20. This analysis was in excess of that, $^{24}Na$, $^{45}Ca$, $^{59}Fe$ nucleus paper deregulation concentration. The value is reduced is greater the deeper the depth of the shielding wall concentration. Based on this, three specific areas (E, F, G) was estimated to be impossible to landfill or recycling. The rest area was estimated to be buried or recycled if possible more than a predetermined depth.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.660-667
• /
• 2016

Conventional decontamination methods utilize water-based systems, which generate high amounts of secondary wastes. Herein, we describe an environmentally benign decontamination method using liquid and supercritical $CO_2$. The use of $CO_2$ as a solvent affords effective waste reduction by its ability to be recycled, thereby leaving be hind only the contaminants upon its evaporation. In this study, a $CO_2$ solution process was assessed using t-salen(t-butylsalen), DC18C6 (dicyclohexano-18Crown6), 8-HQN(8-hydroxyquinoline), NEt4PFOSA(perfluoro-1-octanesulfonic acid tetra-ethyl ammonium salt), and NEt4PFOA(pentadecafluorooctanoic acid ammonium salt) to extract spiked radioactive contaminants(Nb,Zr,Co,Sr) from an inert sample matrix, namely filter paper. With the static extraction method, Sr was extracted with a maximum extraction rate of 97%, and Nb was extracted with a maximum extraction rate of 75%. Additionally, we were also able to extract Co and Zr with maximum extract ion ratesof 73% and 64%, respectively.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.797-801
• /
• 2020

Most of irradiated graphite that should be disposed comes from moderators and reflectors of nuclear power plants. The quantity of irradiated graphite could be higher in the future if high-temperature reactors (HTRs) will be deployed. In this case noteworthy quantities of fuel pebbles containing semi-graphitic carbonaceous material should be added to the already existing 250,000 tons of irradiated graphite. Industry graphite is largely used in industrial applications for its high thermal and electrical conductivity and thermal and chemical resistance, making it a valuable material. Irradiated graphite constitutes a waste management challenge owing to the presence of long-lived radionuclides, such as ¹⁴C and ³⁶Cl. In the ENEA Nuclear Material Characterization Laboratory it has been successfully designed a procedure based on the exfoliation process organic solvent assisted, with the purpose of investigate the possibility of achieving graphite significantly less toxic that could be recycled for other purpose [1]. The objective of this paper is to evaluate the possibility of the scalability from laboratory to industrial dimensions of the exfoliation process and provide the prototype of a chemical plant for the treatment of irradiated graphite.

• Hwankyungkyoyuk
• /
• v.19 no.2 s.30
• /
• pp.81-95
• /
• 2006

School is an excellent place for children to loam environment-conscious behavior and for teachers to bring up environmental education. School has a plenty of teaching materials such as school building, pond, school forest, waste and school supplies. Especially, the environmental education for and with school supplies can be very effective, as it is mostly the first products for children to learn the buying and consumption in their daily life. In this study we conducted a survey on the environmental attitude of two groups of 5th graders towards environmentally friendly school supplies. The experimental group received environmental education on school supplies and the control group did not. The survey results showed that almost 50% of the children did not consider the environmental impact, but rather the price, design and function when buying the school supplies. However, more than 70% of children were willing to use the recycled school products, implying that they are aware of environmental Issues and want to contribute to the preservation and improvement of the environment. The children recognized paper/notebooks and paints/crayons as the major environmental problems. Writing appliances such as pens, pencils, highlighters and markers were also considered as environmental concerns, since most of them are made of plastics and they are not easily biodegradable nor refillable. We also exemplify a lesson-plan for environmental education program on school supplies and make suggestions to encourage the use of those eco-friendly school materials.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.358-368
• /
• 1994

Major factors in reducing the stacking strength of corrugated fiberboard boxes in cold storage or transport conditions are high relative humidity, causing elevated moisture absorption by the boxes. The bottom boxes in a stack will deform to the critical deflection causing agricultural products damage there, and eventually additional deflection will cause box collapse and finally toppling of the stack. The study was conducted to determine the water absorption characteristics and the compressive strength of the corrugated fiberboard boxes being widely used in packaging agricultural products in Korea. The sample boxes for the study were selected from the regular slotted containers (RSC) types, and one was the box used in apple packaging (Box A), another one was the box used in pear packaging (Box B). The corrugated shipping containers were made from a large portion of recycled fibers in Korea, and comparing with Box B, Box A was fabricated from fiberboard which contained more percentage of old corrugated containers (OCC) imported from foreign countries than domestic waste paper. The results obtained from the study were summarized as follows ; 1. Equilibrium moisture content (EMC) of the sample boxes was established after about 20 hours, and the EMC by absorption was lower than that by desorption. The EMC increased with the increasing of relative humidity and with the decreasing of temperature, and the rate of increasing was much higher above the relative humidity of 50%. 2. The maximum compressive strength of Box A was about 100 kgf greater than that of Box B on the same enviromental conditions. The strength of the sample boxes decreased rapidly with the increasing of relative humidity. The effect of relative humidity on the strength was a little higher than that of temperature. 3. As the applied load was progressively increased and a level was reached, the vertical side panels ($L{\times}D$) deflected laterally inwards or outwards. The panels deflected laterally inwards at higher relative humidity. 4. The maximum compressive deflection ratio and the critical deflection ratio of the sample boxes were increased linearly with the increasing of relative hunidity, but trends for its ratios showed inconsistant response to temperature.