• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.9-17
• /
• 1997

This research aims to remove nitrogen in the piggery wastewater by combined process with upflow anaerobic sludge blanket (UASB) and biofilm process. For the effective denitrification. anaerobic and anoxic reactors were connected to a reactor. The effluent of aerobix reactor was recycled equally with influent in the upper filter of anaerobic reactor for denitrification and outlet of UBF reactor was connected to the settling tank with $1.5{\;}{\ell}$ capacity and the settling sludge was repeatedly recycled to UASB zone. The organic loading rate of total reactor was operated from 0.4 to $3.1kgCOD/m^{3}/d$ and it was observed that the removal rate of TCOD was 80 to 95 percentage. Ammonia nitrogen was removed over 90 percentage in the less volumetric loading rate than $0.1{\;}kgN/m^{3}/d$. But because of non-limitation of organic materials, it was reduced to 70 percentage in the more volumetric loading rate than $0.6{\;}kgN/m^{3}/d$. But denitrification rate was observed 100 percentage in the all of loading rate. This is caused by the maintenance of optimum temperature, sufficient carbon source, and competition of electron acceptors. The results of COD mass balance at the $1.21{\;}kgCOD/m^{3}/d$ was observed with the 71.7% percentage of influent COD. It was revealed that the most part of organic materials was removed in the aerobic and the anaerobic reactor because 38.4 percentage was conversed into $CH_{4}$ gas and 11 percentage was removed in the aerobic reactor with cell synthesis and metabolism. Besides, 5.7% organics was used to denitrification reaction and 3.7% organics related to sulfate reduction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2016

In this study, to clarify the differences rebar corrosion beginning, through the actual corrosion accelerated test in corrosion time and laboratory test chamber of the structure of the marine environment results in both environments, it is an object of correlation coefficient derived. The accelerated corrosion test was carried out by two case, I.e., one is $20^{\circ}C$ of low temperaure codition(case 1), and the other is $65^{\circ}C$ of high temperaute codition(case 2). Whether corroions occurs, it was measures using half-cell potential method. The results indicated that case 2 is to acclerate the corrosion of rebar about 1.7~1.8 times as compared with case 1, thenthe corrosion of rebar embadded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between acclerated corrosion test and long-term exposure test, case 1 is 2.45 to 2.94, and case 2 is 4.37~4.99.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.302-306
• /
• 2005

This Study was Conducted in 3 glasshouse to examine the Possibility for cultivation of plug seedlings using four growing media containing recycled PET-bottle-particles (PBT) as a medium component. Plug seedlings of 'Seokwang' tomato were grown in media containing $100\%$ PBT, $100\%$ peatmoss, or $50\%$ $PBT+50\%$ peatmoss. A commercial plug medium (Tosilee) was used as the control. All seeds were sown in 128 cell plug trays on July 12, 2004. Seedling growth was measured at 30 days after sowing. Percent seed germination was greater than 95% in all treatments. Plant height, shoot fresh and dry weights, leaf area, and hypocotyl length were the greatest in the control treatment. Root length and weight were the greatest in the $100\%$ PBT treatment, which had a medium pH of 7.3. Leaf area and shoot dry weight were greater in the $50\%$ $PBT+50\%$ peatmoss treatment, than in the $100\%$ PBT treatment, while they were the smallest in the $100\%$ peatmoss treatment. No toxicity symptoms caused by the use or PBT had been observed in any treatment. The results suggest a possibility of recycled PBT, a valuable reusable resource, to be used as a component for medium amendments in horticultural transplant production.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.133-142
• /
• 2022

The increased production and consumption of polyethylene terephthalate (PET)-based products over the past several decades has resulted in the discharge of countless tons of PET waste into the marine environment. PET microparticles resulting from the physical erosion of general PET wastes end up in the ocean and pose a threat to the marine biosphere and human health, necessitating the development of new technologies for recycling and upcycling. Notably, enzyme-mediated PET degradation is an appealing option due to its eco-friendly and energy-saving characteristics. PETase, a PET-hydrolyzing enzyme originating from Ideonella sakaiensis, is one of the most thoroughly researched biological catalysts. However, the industrial application of PETase-mediated PET recycling is limited due to the low stability and poor reusability of the enzyme. Here we developed the whole-cell catalyst (WCC) in which functional PETase is attached to the outer membrane of Escherichia coli. Immunoassays are used to identify the surface-expressed PETase, and we demonstrated that the WCC degraded PET microparticles most efficiently at 30℃ and pH 9 without agitation. Furthermore, the WCC increased the PET-degrading activity in a concentration-dependent manner, surpassing the limited activity of soluble PETase above 100 nM. Finally, we demonstrated that the WCC could be recycled up to three times.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.97-104
• /
• 2020

The present study conducted mock-up tests under the simulated sewage environments to examine the practical significance and limitation of coating materials that were previously developed on the basis of the bacterial glycocalix as a protection of concrete structures exposed to microbiological and sulphate attacks. The variations of the compressive strength and mass of the concrete due to the sulphate attack were measured using cylinder specimens. The bacteria growth and glycocalix formulation were calculated from the samples extracted from the sewage pipes. The next generation sequencing analysis was also conducted for environmental damage assessment due to the use of Rhodobacter capsulatus in the simulated sewage environments. The mock-up tests revealed that the developed coating materials have a good potential in resisting the sulphate attack, indicating no reduction on compressive strength and mass of the coated concrete under the sewage environment. At the age of 91 days, the concentrations of viable bacteria and glycocalix measured from the hardened coating materials were 1.4×10⁴cell/mL and 67.5mg/㎤, respectively. Moreover, harmful strains were not observed in the sewage water including glycocalix-coated concrete pipes. This implies that Rhodobacter capsulatus used in the coating materials does not influence negatively the microorganism cluster in the sewage environments.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.191-199
• /
• 2021

In this study, the correlation between the influencing factors on corrosion and Half Cell Potential(HCP) measurement was analyzed considering the three levels of W/C ratio, cover depth, and chloride concentration. The HCP increased with enlarged cover depth, so it was confirmed that the increment of cover depth was effective for control of corrosion. Based on the criteria, the case of 60mm cover depth showed excellent corrosion control with under -200mV, indicating increase of cover depth is an effective method for reducing intrusion of external deterioration factors. When fresh water was injected to the upper part of specimens, very low level of HCP was monitored, but in the case that concentrations of chloride were 3.5% and 7.0%, HCP dropped under -200mV. In addition, the case with high volume of unit binder showed lower HCP measurement like increasing cover depth. Multiple regression analysis was performed to evaluate the correlation between the corrosive influence factors and HCP results, showing high coefficient of determination of 0.97. However, there were limitations such as limited number of samples and measuring period. Through the additional corrosion monitoring and chloride content evaluation after dismantling the specimen, more reasonable prediction can be achieved for correlation analysis with relevant data.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.492-498
• /
• 2021

In this paper, the electromagnetic wave transmittance of the reinforced concrete structure wall was analyzed using the performance measurement system of electromagnetic wave shielding. Recently, electromagnetic wave shielding technologies on the reinforced concrete wall conditions have been studied, and the shielding effectiveness have been tested on unit cell size. However, the unit cell size tests have problems on that the measurement range for shielding performance is insufficient and it is difficult to reflect the real conditions of the concrete wall. Therefore, we constructed a shielding performance measurement system using a large sample of 2.2m × 2.2m like a real wall. To verify the measurement system, general reinforced concrete test samples were selected, and real shielding performance measurements and numerical analysis were proceeded. Test and numerical analysis results showed similar tendencies in the evaluation frequency range of 75MHz to 2GHz. Thus we validated the effectiveness of this shielding performance measurement system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.493-499
• /
• 2011

The objective of this study was to find the way to prolong the storage time of sawdust-based oyster mushroom (Pleurotus osteratus) spent substrate (OMSS) by fermenting with potential probiotic microorganisms to recycle the otherwise waste of mushroom farms. To this purpose, lactic acid bacteria (LAB) were screened to select the best lactic acid-producing strains. Three strains of LAB (Lactobacillus plantarum Lp1', Pediococcus acidilacticii Pa193, L. plantarum Lp2M) were selected and in mixture they lowered the pH of the fermented OMSS to 3.81. fOMSS (fermented sawdust-based oyster mushroom spent substrate) could be stored at room temperature for at least 17 days without any deterioration of feed quality based on the pH, smell, and color. In dry matter disappearance rate in situ, commercial TMR (total mixed ration), OMSS and OMMM (oyster mushroom mycelium mass) showed no significant differences between the samples after 6, 12 and 24 h incubation except for 48 h. Two separate field studies were performed to test the effects of fOMSS supplement on the growth performance of postweaning Holstein calves. Field trials included groups of animals feeding calf starter supplemented with: Control (no supplement), AB (colistin 0.08% and oxyneo 110/110 0.1%), fOMSS (10% fOMSS) and fConc (10% fermented concentrate) and DFM (direct-fed microbials, average $10^9$ cfu for each of three LAB/d/head). Growth performance (average daily gain and feed efficiency) of the fOMSS supplement group was higher than that of AB followed by fConc and DFM even though there was no statistically significant difference. The Control group was lower than any other group. Various hematological values including IgG, IgA, RBC (red blood cell), hemoglobin, and hematocrit were measured every 10 days to check any unusual abnormality for all groups in trial I and II, and they were within a normal and safe range. Our results suggest that sawdust-based OMSS could be recycled after fermentation with three probiotic LAB strains as a feed supplement for post-weaning calves, and fOMSS has the beneficial effects of an alternative to antibiotics for a growth enhancer in dairy calves.

• Korean Journal of Food Science and Technology
• /
• v.4 no.3
• /
• pp.200-205
• /
• 1972

Effects of several different petroleum fractions (LGO, HGO, VGO, Diesel oil, SP(E), HGO-wax, L/M-wax), stepwise addition of calculated amounts of HGO at defined intervals, recycling of spent media on cell growth of Candida tropicalis KIST 351 were studied using $2.5{\ell}$ fermenter by batch process. In addition, continuous cultivation of the yeast was also performed in the light of biomass production using $28{\ell}$ fermenter with LGO. 1) Cell concentration, yield on the basis of gas oil and n-paraffin with the petroleum fractions were in the range of $11{\sim}15g/{\ell}$, $10{\sim}12%$ and $77{\sim}82%$, respectively. 2) By stepwise addition of the gas oil, cell concentration and yield on the oil were increased up to 18.9 g/land 13%, respectively. 3) Spent medium slowed emulsifying ability of hydrocarbon and stimulating effect on the cell growth. Without additional supplementation of $Mg^{++}$ up to 20% of spent medium could be reused, while by adding of the $Mg^{++}$, 50% of medium could be recycled. 4) Optimum condition of continuous cultivation for biomass production was attained at the dilution rate of $D=0.1{\sim}0.125\;hr^{-1}$. Maximum yield coefficient on consumed n-paraffin was 0.94 at $D=0.1\;hr^{-1}$, however, 24% of supplied n-paraffin in the media was not utilized at this dilution rate.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.79-91
• /
• 2017

The core of Hydrogen Fuel Cell Vehicles (FCV) is polymer solid fuel cell (PEFC), and the core material that generates electrochemical electricity in the cell is platinum catalyst. Platinum is localized in South Africa and Russia, and the world production of Pt is about 178 tons per year, which is expensive and recycled. At present, the amount of Pt used in PEFC is $0.2{\sim}0.1mg/cm^2$. In order to reduce the price of the battery and increase the FCV supply, the target is to reduce the amount of Pt used to $0.05{\sim}0.03mg/cm^2$. $Pt-Pd/Al_2O_3$, Pt/C, Pt/GCB, Pt/Au/C, PtCo/C, PtPd/C, etc. by using polyol method using nano Pt, improved Cu-UPD/Pt substitution method and nano-capsule method, Have been researched and developed, and there have been reported techniques for improving the activity of Pt catalysts and stabilizing them. This paper investigates the production technology of nano-Pt and nano-Pt catalysts, recycling of spent Pt catalysts and application trends of Pt catalysts.