• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.148-149
• /
• 2014

The aim of this research is to contribute on investment of less cement mortar or concrete in normal strength range using additional hydration of BS with stimulating effect of FGD and OPC based on the previous research result of the BS and RFA using cement mortar. As a test, the composition for normal strength range of mortar was evaluated with 0, 10, and 20 % of FDA and 0, 20 % of OPC replacement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.116-121
• /
• 2019

본 연구에서는 분쇄한 순환골재 분말(RAP)을 건설소재로 활용하기 위하여 순환골재 및 RAP의 재료적 특성을 파악하고, 시멘트 대체재로 RAP를 적용한 모르타르의 물리 역학적 특성을 분석하였다. RAP 입도분석결과, 볼밀 시간이 증가함에 따라 0.6mm 입도의 분포량이 증가하고, 조립률은 감소하는 것으로 나타났다. RAP를 치환한 모르타르의 유동성은 Plain 보다 향상되었으며, 이는 RAP를 결합재 대체재로 적용함으로서 잉여수의 증가하고 이로 인해 유동성이 증가된 것으로 판단된다. RAP를 적용한 모르타르의 압축강도 평가 결과, 치환율이 증가함에 따라 압축강도가 낮아지는 경향을 나타내었지만, 약 10%까지는 치환하여 사용가능한 것으로 판단된다. 이상의 연구로부터 분말화한 순환골재는 잔골재 대체재로서도 품질특성을 만족할 수 있는 것으로 나타났으며, 본 연구 범위에서는 결합재 대체재로 약 10% 적용시 유동성 개선 및 강도 확보가 가능할 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.253-259
• /
• 2021

플라스틱은 소비량 증가에 따라 생활계폐기물 중 폐플라스틱의 발생량도 급격히 증가하고 있으나, 분리, 선별 공정 비용 증가 등으로 재활용은 저조한 실정이다. 이에 본 연구는 생활계폐기물 발생 복합재질 폐플라스틱을 콘크리트용 골재로 재활용하기 위한 기초 연구로 고로슬래그 미분말을 충진한 복합재질 폐플라스틱 잔골재 및 굵은골재의 투입 비율 및 투입량이 콘크리트의 슬럼프 및 압축강도에 미치는 영향을 실험적으로 평가하였다. 복합재질 폐플라스틱 굵은골재는 부순 굵은골재 대비 조립률은 유사하나, 입자 크기가 작은 단입도 분포인 반면에, 복합재질 폐플라스틱 잔골재는 부순 잔골재 대비 조립률 및 입자 크기가 큰 단입도 분포인 것으로 나타났으며, 고로슬래그 미분말에 의한 밀도 및 공극 충진에 의한 흡수율 향상 효과는 복합재질 굵은골재 대비 복합재질 잔골재가 큰 것으로 나타났다. 복합재질 폐플라스틱 골재의 투입량이 증가할수록 콘크리트의 슬럼프와 압축강도는 감소하였다. 특히, 동일한 양의 복합재질 폐플라스틱 골재 투입 수준에서 복합재질 폐플라스틱 잔골재의 투입량이 많을수록 슬럼프와 압축강도는 작아지는 것으로 나타났으며, 이는 복합재질 폐플라스틱 잔골재 중 ROD 형상의 골재 하부에 공기가 갇히면서 형성된 공극에 의한 것으로 판단된다. 한편, 혼화제 투입 및 단위 시멘트량 증대는 복합재질 폐플라스틱 골재 투입 콘크리트의 압축강도 향상에는 효과가 있는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.23-24
• /
• 2021

The use of recycled concrete aggregates (RCA) as a substitute for natural aggregates in new concrete produces both economic and environmental advantages. Most of the RCA applications for pavements have been primarily applied to support layers for roads and airfields. This paper summarizes a work completed at the University of Illinois in partnership with the O'Hare Modernization Program to examine the effect of coarse and fine RCA on the concrete's fresh and hardened properties for airfield rigid pavement applications. Ten different RCA concrete mixtures were prepared with the incorporation of different percentages of RCA fines as well as replacement of cement with high volume percentages of supplementary cementitious materials such as Class C fly ash and ground granulated blast furnace slag to improve the workability and long-term properties of RCA concrete. All the mixes on this stage included 100% recycled coarse aggregates and the Two-Stage Mixing Approach was used as a mixing procedure. Based on the results obtained in the research, mixes with high percentages of recycled fine and coarse aggregates could be used for construction of airfield concrete pavements in conjunction with supplementary cementitious materials

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2014

In this study, industrial by-products including blast furnace slag, incineration ash and waste gypsum were used with recycled fine aggregates to manufacture the zero-cement mortar. The replacement ratio of anhydrite gypsum was fixed as 0, 10%, 20% the replacement ratio fo WA1 was fixed as 0.5% and 1.0%, respectively. It could be identified that when the replacement of gypsum was 20% and WA1 of 1.0%, the strength could be in the range of normal strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2014

In this study, industrial by-products including blast furnace slag, incineration ash and waste gypsum were used with recycled fine aggregates to manufacture the zero-cement mortar.The replacement ratio of dihydrate gypsum and anhydrite gypsum was fixed as 0 and 10%, the replacement ratio fo WA1 was fixed as 0.5% and 1.0%, respectively. It could be identified that when the replacement of gypsum was 10% and WA1 of 1.0%, the strength could be in the range of normal strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.281-286
• /
• 2001

The development of automobile, vessel, rail road, and machine industry leads increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 900,000 ton a year, but most WFS buries itself and only 5~6% WFS is recycled as a material in construction materials. In this study, WFS is used as a fine aggregate for concrete. Five types of concretes aimed at the specified strength of 240$\pm$10 kgf/$cm^{2}$ , air contents of 4.5$\pm$1% and slump of 12$\pm$1.5cm were mixed with washed coarse seashore sand(WFS) in which salt was removed and then optimum mix proportion of concrete was determined. Moreover, basic properties such as setting time, workability, bleeding and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In .addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.542-551
• /
• 2023

본 논문에서는 바텀애시 골재에 천연 잔골재를 혼입한 다공성 콘크리트의 열적 특성을 분석하였다. 본 연구에서는 바텀애시 골재에 천연 잔골재를 사용하여 각 골재의 재료 특성을 파악 한 후, 다공성 콘크리트의 골재로 사용하였다. 물-바인더 비는 0.25으로 고정하여, 가압다짐을 0.5, 1.5 및 2.5 MPa 수준으로 지정하여 다공성 콘크리트 시편을 제작하였다. 단위질량, 총 공극률 및 열전도도 실험을 진행하고 분석을 수행하였다. 가압다짐 수준이 증가하고, 천연잔골재 혼입률이 증가하면 단위질량과 열전도도 값은 증가하였으며, 총 공극률 값은 감소하였다. 또한, 다공성 콘크리트의 단위질량과 총 공극률, 열전도도 상관관계 그래프를 제시하여 해외 실험 사례와 비교 분석하였다. 이후 실험 결과에 대한 회귀 분석을 진행하여 상관계수(R²) 값을 분석하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.207-208
• /
• 2016

The most important things for the production of recycled aggregates are saving energy, suppressing the generation of by-product fine particles and sustaining the performance of concrete. As solutions, this study proposes this technology of improving the performance of recycled aggregates through forced carbonation.1) It is to stimulate and carbonate the bond paste part that causes the deterioration of recycled aggregates. Particularly, the purpose of this technology is to fill and chemically stabilize pores inside the bond paste, further improving the quality of recycled aggregates with a decreased absorption rate and an enhanced aggregate strength. Ultimately, it is possible to obtain a carbonation model, depending on the paste ratio and particle-size distribution of recycled aggregates. Moreover, by calculating the optimum carbonation period through the verification of this carbonation model, it is possible to examine how much the strength is improved by the reformation of recycled aggregated.

• Computers and Concrete
• /
• 제34권4호
• /
• pp.427-446
• /
• 2024

The I-shaped steel reinforced recycled aggregate concrete (SRRC) composite structure has the advantages of high bearing capacity and environmental protection, and the interfacial bond strength is an important theory. To this end, the I-shaped SRRC bond strength and its calculation based on artificial neural network (ANN) will be studied. Firstly, 39 push out tests of I-shaped SRRC were conducted, the load-slip curve has obvious regularity, which is divided into 4 segments by 3 regular points. Three bond strengths were defined based on these three rule points, and the approximate ranges of their values and the laws of influence of each factor on them were found. Secondly, the Elman ANN model used for the prediction of bond strength was established, and the parameters of Elman ANN predicting I-shaped SRRC bond strength were studied, and the effects of detailed parameters on the prediction results were revealed. Finally, the bond strength of SRRC was predicted using Elman and BP (back propagation) neural network models, both of which showed good prediction results. This study is a theoretical basis for the design and fine simulation of I-shaped SRRC composite structures.