• Title/Summary/Keyword: Rectangular plan

Search Result 80, Processing Time 0.023 seconds

Seismic deformation demands on rectangular structural walls in frame-wall systems

  • Kazaz, Ilker
    • Earthquakes and Structures
    • /
    • v.10 no.2
    • /
    • pp.329-350
    • /
    • 2016
  • A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

A Study on the Facility Layout and Signal-fire Stand of Border Signal-fire in Chosun Dynasty (조선시대 연변봉수(沿邊烽燧)의 배치형식 및 연대(煙臺)에 관한 연구)

  • Lee, Chul-Young;Yoon, Jae-Woong
    • Journal of architectural history
    • /
    • v.15 no.5
    • /
    • pp.41-56
    • /
    • 2006
  • Signal fire was a communication system which deliver urgent news by smoke and light. It informed the condition of the border to the central government and the military base rapidly. This research was to analyze the border signal-fire which is the main facility of military protective duty for safety of sea side in chosun dynasty. The results of this research were described separately as follows. 1. The border signal-fire has three types of facility layout, The majority was one-site, near two-site, separate type. The majority was near two-site type. 2. Plan configuration of signal-fire stand which is separated with circle, oval, round-rectangular and rectangular type roughly was constructed with circle type generally. Four types of signal-fire stand was observed in southern and western sea side impartially. However, in eastern side, circle type of signal-fire stand was mainly found. Therefore, regional characteristics could be considered partially. 3. The height of signal-fire stand was about 8~10m. The diameter of combustion chamber on the signal-fire stand was 2~3m in circle type, and the dimension of rectangular type was about $1.9{\times}1.9{\sim}3.2{\times}3.0m$. 4. Building base that protect ground moisture and infilteration of rainfall was found in 10 border singal-fire, the height of it was about 0.3m~2.5m.

  • PDF

The Regional Characteristic of ㅁ Shape TtulJip Plan around AnDong Cultural Area (안동문화권 ㅁ자형 뜰집 평면구성의 지역적 특성)

  • Shin, Chi-Hoo;Kim, Sung-Woo
    • Journal of architectural history
    • /
    • v.19 no.5
    • /
    • pp.7-23
    • /
    • 2010
  • The aim of this study is to analyze the planar composition of rectangular formation houses in 8 areas, both cities and counties, in the sphere of Andong and to reveal the characteristics of these houses in each region. This study of the rectangular formation of houses and their characteristics will facilitate an understanding of the general trends of housing in Andong cultural area.. In this study, the subject houses are composed of three parts: Bonchae, Anchae, and Sarangchae, and the author classified the planar types of the houses. The differences in the regional planar types were analyzed through visual and statistical methods. The analyzed results reveal the regional characteristics of the rectangular formation houses in terms of their planar aspects in the Andong region. The distribution showed the greatest preference toward one type out of two types of distribution of Bonchae, Anchae, and Sarangchae. The ratio for the higher distribution was approximately 70%, whereas the ratio for the lower distribution was around 20%. For convenience, the type with a higher distribution rate is referred to as the "major type," and the type with a lower distribution rate is termed the "minor type." The complete-type houses (73%) in Bonchae were a major type there, and the symmetric-type houses (73%) in Anchae were the major type in that location. In addition, the corner-type houses (72%) in Sarangchae were the major type. In the regional distribution of major types and minor types in the 8 regional cities and counties, regional differences were noted. The three regional groups can be divided into A, B, and C according to the distribution ratio. Andong, Bonghwa, and Yecheon belong to region A. that shows a variety of distribution types and a dispersive trend. Yeongyang and Yeongdeok belong to region C that shows a simplified trend.Yeongju and Cheongsong belong to region B.

Case Study on the Building Organization of Medibio Research Laboratory Facilities in Research-driven Hospital (연구중심병원 의생명연구원의 실험실 구성 사례 조사)

  • Kim, Young-Aee
    • Journal of the Architectural Institute of Korea Planning & Design
    • /
    • v.34 no.11
    • /
    • pp.95-104
    • /
    • 2018
  • Healthcare technology has been growing and fostering cooperation between industry, university and hospitals as growth engines in korea. So, the medibio research institutes in hospital have been constructed to promote research and industrialization centering on healthcare technology. The purpose of this study is to investigate the cases of research institutes in hospitals, and search the characteristics of building organization of medibio research laboratory facilities. Case study is investigated by floor plan, homepage and site visits about five research institutes selected in research-driven hospitals. The facility title and size of research laboratory is originated from site area and research building location. The building function include not only the research lab and business office reflecting on the development platform, and but assembly and meeting room in the ground level. Laboratory floor plans have three types, rectangular, rectangular+linear and linear type, one is traditional and efficient, the others are people and friendly. And building core types are correlated with lab space unit modules, single and double side core are shown in rectangular type. All the laboratories are open lab, composed with laboratory bench and research note writing desk facing the lab service and enclosed lab-support area. And they have communication space looking as warm and cozy common area for the innovation, convergence and collaboration. As the high risk of contamination and high standard for safety and security, equipment and facilities are well managed with biological environment including BSC, fume hood, PCR classification, eye washing and emergency shower.

A Comparative Study on the Apartment Unit Plans According to the Living Environment Elements of Housing in Korea and China - Focused on Apartment cases in Seoul and Shanghai - (한.중 공동주택의 생활환경요인을 통한 단위평면 비교 연구 - 서울과 상하이 전통, 근대, 현대 공동주택 사례를 중심으로 -)

  • Liang, Fei;Yoon, Hea-Kyung;Park, Hyeon-Soo
    • Korean Institute of Interior Design Journal
    • /
    • v.19 no.2
    • /
    • pp.136-143
    • /
    • 2010
  • This study aims to seek a direction of development in apartment interior planning method, considering residential condition and historical planning schemes in South Korea and China. In this study, South Korea and China's traditional housing and modern apartment unit was studied to identify environmental attributes of residence. For Korea, Banga, where upper class residents lived, and modern urban Hanok were chosen to be analyzed. For China, two types of housing wear studied: Sahapwon, original form of China housing, and Yinong house which is a typical Sanghai house. First, the elements of living environment in two major cities; Seoul and Sanghai was defined to analyze factors of traditional houses in both cities. Depending on those factors, relationship among traditional and modern housing types were compared and analyzed, focusing on unit plan case studies for a better understanding of living environment in South Korea and China. From this study, similarities and differences between apartment plans in Seoul and Shanghai was examined according to their residential style, surrounding natural environment and lifestyle factors. In Seoul's apartment, spacial composition and movement lines were mainly formed around the public space in Seoul, while public space of living and dining room was located at housing entrance area in the Shanghai's residential system, configuring narrow form of housing unit. In respect of the natural environment, the unit plan of rectangular form in Seoul was more efficient in day lighting and wind circulation than the unit plan of narrow form in Shanghai. It was also found that cultural differences of stand-up and seat life style influenced on the composition of unit plans in Seoul and Shanghai.n Apartment cases in Seoul and Shanghai.

The Design of repeater U-shaped Antenna for ship base station Applications (선박기지국 응용을 위한 중계기용 U형 급전 안테나 설계)

  • Park, Chang-Hyun;Kim, Young-Nam;Kim, Kab-Ki
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2007.11a
    • /
    • pp.211-214
    • /
    • 2007
  • In this paper, we have designed microstrip antenna if 800[MHz] band It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had U-shaped feeding structure at a rectangular patch And ground or feeding structure used between dielectric constant(${\varepsilon}_T$ = 2.1), patch or feeding structure used between dielectric constant(${\varepsilon}_T$ =1). So it used a duplex resonance effect Designed frequency bandwith(V5WR 2:1) if the antenna showed good characteristic of $780[MHz]{\sim}1.83[GHz]$ to 2.61[GHz]. Also the E-plan and H-plan all profit 9.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan and H-plan $60^{\circ}$ to be improved.

  • PDF

The Design of 800MHz Band Repeater Antenna for Ship Base Station Application (선박기지국 응용을 위한 800MHz 대역 중계기용 안테나 설계)

  • Kim, Kab-Ki
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.13 no.3
    • /
    • pp.219-222
    • /
    • 2007
  • In this paper, we have designed microstrip antenna of 800[MHz] band. It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band. we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had L-shaped feeding structure at a rectangular patch and added the parallel L-slot that used a duplex resonance effect. Also for the improvement of profit the stack with the perpendicular. Designed frequency bandwith(VSWR 2:1) of the antenna showed good characteristic of 789${\sim}$1046[MHz] to 292[MHz](36%). Also the E-plan and H-plan all profit 6.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan $44.7^{\circ} and H-plan $61.8^{\circ} to be improved.

  • PDF

Daylighting Performance of Refurbished Window System based on Site Plans in Recently-Planned Apartment Houses (공동주택의 배치유형에 따른 창호 시스템의 채광특성)

  • Kim, Gon;Roh, Ji-Woong
    • KIEAE Journal
    • /
    • v.8 no.1
    • /
    • pp.37-44
    • /
    • 2008
  • Though they have advantages in terms of aesthetic in modern architecture, however, rectangular-shaped towers causes being short of natural light due to deep interior space. There are compromised attempts to take advantages of each building shape selectively. As a result, we now witness the advent of Y-shaped, T-shaped, V-shaped and ㅈ-shaped buildings on the market. The mutative type of apartment houses usually faces southwest or southeast, which has lot of daylighting availability but anyhow, the proportion of the apartment houses which have a full south aspect. The need to verify the potential of daylighting in new building-block shapes exists. At the same time, the expansion of balcony area was legalized and thus, a visual buffer area does not exist any more. All-glass window wall on apartment houses without a balcony produces pretty harmful area with direct sunbeam. Recently, the refurbished version of conventional windows has been developed for the purposed of minimizing energy loss occurred around windows. This research initialized a series of research to deal with almost all on window wall for apartment houses. First of all, huge amount of already-designed examples of apartment houses have been analyzed in terms of floor plan, elevation, orientation and glazing materials.

The Landscape Design of Sejong Center Square by applying the Combination of Geometric Lines (기하학적 선의 조합을 응용한 세종문화화관 조경설계)

  • Jeong, Jeong-Sup;Hong, Young-Rok;Kwon, Sang-Zoon;Shin, Byung-Cheul;Choi, Yeon-Chul
    • Journal of Environmental Science International
    • /
    • v.12 no.2
    • /
    • pp.195-199
    • /
    • 2003
  • This landscape design is a work for which we selected the square of Sejong Center for the Performing Arts as a object area, drew inhuman factors, and tried to restore them to human environment. This plan assumes that excessive urban environment results from disorder and man can keep it in order and restore it to human environment through the progressive process of speculation. In this plan, we included the least parking space and nearby roads in the object area to maximize the location feature and the symbol of cultural space, and planned that the object area may play its role of open space in the downtown. To grant the symbol of culture space, we established the progressive process of speculation and the relationship of mu, heaven and earth, and culture, geometrically diagrammatized it, combined the circular and rectangular lines derived from it, and suggested a plan. Urban environment will continue to change in the future. However, as long as it is not ensured that the change will progress upward, city would be far from human environment anyhow. Effects to display inhuman space overlooked in the downtown and restore it to human environment for citizen and location for man, should continue.

A Study on the Reuse Plan of Architectural Heritage as a Townscape Resource - Focused on an old office building of Leaf tobacco Producer' cooperation, Jecheon - (도시경관 자원으로서 건축문화재의 활용 방안에 관한 연구 - 제천 엽연초생산조합 구사옥을 중심으로 -)

  • Lee, Wan-Geon
    • Korean Institute of Interior Design Journal
    • /
    • v.23 no.1
    • /
    • pp.69-77
    • /
    • 2014
  • This study aims to find the optimum method to reuse as townscape resource and to preserve the architectural heritage. And, it wants to contribute the policy of the architectural heritage and townscape. This research is targeted at an old office building of Leaf tobacco Producer' cooperation, designated as a cultural assets in Jecheon. It investigated the design characteristics of an old office building of Leaf tobacco Producer' cooperation and the streetscape of Uibyeong-daero 12-gil. It was conducted using the research methods of the field survey, and it was to analyze and to compare the various existing data and a current status. The result are as followings. Firstly, we should be consider the policy of architectural heritage that a sense of place can be preserved. Secondly, we should be consider the linear method of the conservation and reuse in urban street that the architectural heritage is located at least. Thirdly, if it will be to maintain the facade of the building adjacent to the street using the design characteristics of an old office building of Leaf tobacco Producer' cooperation, Uibyeong-daero 12-gil will be made a unique street that will be represented the history of leaf tobacco produce. Lastly, it has been analyzed that the design characteristics of an old office building of Leaf tobacco Producer' cooperation are the arch of entrance, the arched window, the rectangular window, the entabature, the horizontal joint, the finish of cement mortar, a pitched roof, etc. And, the design guideline and the maintenance plan of Uibyeong-daero 12-gil have made.