• 설비공학논문집
• /
• 제4권2호
• /
• pp.106-115
• /
• 1992

Numerical analysis of the laminar natural convection in an enclosure of the 20KVA oil-immeresed transformer is presented. The core in the transformer is modelled as a rectangular cylinder and calculation is carried out for $Ra=10^3-10^6$. The correlating equation between the inner cylinder mean Nusselt numbers and Rayleigh numbers can be obtained. The conduction and convection regimes for the variation of Rayleigh numbers are well represented in the temperature distributions along the side wall of the inner cylinder. For high Rayleigh numbers, it is found that the recirculating flow in the enclosure above the inner cylinder is divided into two recirculation regions.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.71-83
• /
• 2007

The double diffusive convection of cold water in the vicinity of its density maximum in a rectangular partitioned enclosure of aspect ratio 5 with isothermal side walls and insulated top and bottom is studied numerically. A thin partition is attached to the hot wall. The species diffusivity of the fluid is assumed to vary linearly with concentration. The governing equations are solved by finite difference scheme. The effects of position and height of the partition, variable species diffusivity and enclosure width are analyzed for various hot wall temperatures. It has been found that adding partition on the hot wall reduces the heat transfer. The density inversion of the water has a great influence on the natural convection. When increasing species diffusivity parameter heat and mass transfer rate is decreased.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.235-251
• /
• 1997

A numerical simulation on the combined natural convection and radiation is carried out in a partially open rectangular enclosure with a heater by using the finite volume and the S-8 discrete ordinate methods. The fluid inside the enclosure is considered as an absorbing, emitting and anisotropic scattering media. The heater causes a natural circulation of the fluid (10$^{5}$ $^{9}$ ) which results in significant in-flow of the ambient cold fluid through the partially open wall. Comparing the results of pure convection with those of the combined convection- radiation, the combined heat transfer results with small Planck numbers (P$_{l}$ <1.0) show much stronger circulation than those of the pure convection, and the fluid circulation is more evident for larger Rayleigh numbers. When one of three radiative properties - the medium absorption coefficient, the wall reflectivity, and the scattering albedo - increases, the fluid circulation and the heat transfer in the enclosure are reduced. The location of the heater and the open ratio of the right wall are also shown to affect the fluid circulation and heat transfer significantly. However, the anisotropy of the scattering phase function is shown to be unimportant for the fluid circulation and heat transfer within the enclosure considered in this study.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1054-1065
• /
• 1993

본 연구에서는 정상상태의 단일 주파수에서의 임의의 음압분포로 조화가진되 는 3차원 정방형 밀폐계 음장의 경우에 대한 능동제어를 시도함으로써 사무실과 같은 실내 공간에 대한 능동적 소음저감의 응용 가능성을 검토하고자 하였다. 또한 변환기 의 위치선정을 위하여 상태공간 모드 모델의 모드 근사화에 따른 계수행렬의 요소를 평가함으로써 가제어성과 가광측성을 만족하는 최적한 변환기 (부가음원, 마이크로폰) 의 위치를 선정하였다. 밀폐계 내부의 음압을 저감시키는 목적함수로는 전체 시간평 균 음향 포텐셜에너지를 사용하였으며 폐공간의 음압변동을 이론적으로 규명함으로써 부가적인 음원의 복소세기를 적절히 선정하여 이 음향 포텐셜 에너지의 양을 최소화 시킬 수 있음을 보였다.

• 한국유체기계학회 논문집
• /
• 제6권1호
• /
• pp.37-43
• /
• 2003

Natural convection of a magnetic fluid is different from that of Newtonian fluids because a magnetic body force exists in an addition to gravity and buoyancy forces. In this paper, the natural convection of a magnetic fluids (W-40) in a rectangular enclosure is investigated by numerical and experimental methods. One side wall is kept at a constant temperature ($25^{\circ}C$), and the opposite side wall is also kept at a constant temperature ($20^{\circ}C$), Under above conditions, the magnitude of the magnetic fields were varied and applied. GSMAC scheme is used for the numerical method, and the thermo-sensitive liquid crystal film (R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental verification. This study has resulted in the following fact that the natural convection of a magnetic fluid is controlled by the direction and intensity of the magnetic fields.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.213-221
• /
• 1985

본 논문에서는 아래면이 고온이고 옆면중의 일부가 저온으로 유지되는 4각형 밀폐공간에서의 자연대류에 대한 수치적 시뮬레이션을 하고, 동등한 경계조건을 가지 는 실험결과와 비교하여 수치모델의 정당성을 입증하고, 정당화된 수치모델의 여러 가 지 변수를 변화시키면서 4각형 밀폐공간내의 열전달 현상을 연구하였다. 실험과 수 치해석의 변수로서 같은 경계조건에 대하여, 종횡비, Gr수 등을 변화시켜 비교하고, 더 나아가 수치모델에 대하여 단열조건의 변화, 저온부의 위치등 경계조건의 변화에 대한 영향을 살폈다.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.30-44
• /
• 1992

A modification of the TEACH-like computer program based on the k-$\varepsilon$ turbulence transport was applied for predicting air mixing patterns and temperature distributions in a rectangular, slot-ventilated enclosure having obstructions ; a rectangular obstacle with heat flux, solid walls separates the passage and the pig pens, and purlins beneath the ceiling. Air flow patterns were calculated for the cases with and without the purlin, extending 300mm beneath the ceiling. Comparisons of prediction data of Randall & Battams(1976) showed air flow pattern predicted well for the case without the purlin. Heat was accumulated at the corner of the left side of the solid wall and the right-upper region of the simulated pigs. However the air distribution pattern was completely different from data for the case with the purlin. The deviation from the observation may be attributed to the difference of the geometric configuation. Exploring the cause of the deviation should be conducted in a further study. Temperature stratification was also observed due to incomplete mixing. The obstruction in the route of the inlet air jet at inlet should be avoided since most of kinetic energy dissipates at the abstacle duet to impingement.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.27-36
• /
• 2020

Natural convection and thermal stratification phenomena are found in large water pools that are being used as heat sinks for decay heat removal from the reactor core using passive heat removal systems. In this study, the two-phase (water and air) natural convection and thermal stratification phenomena with conjugate heat transfer in the rectangular enclosure were investigated numerically using ANSYS Fluent 17.2 code. The transient numerical simulations of these phenomena in the full-scale computational domain of the experimental facility were performed. Generation of water vapour bubbles around the heater rod and evaporation phenomena were included in this numerical investigation. The results of numerical simulations are in good agreement with experimental measurements. This shows that the natural convection is formed in region above the heater rod and the water is thermally stratified in the region below the heater rod. The heat from higher region and from the heater rod is transferred to the lower region via conduction. The thermal stratification disappears and the water becomes well mixed, only after the water temperature reaches the saturation temperature and boiling starts. The developed modelling approach and obtained results provide guidelines for numerical investigations of thermal-hydraulic processes in the water pools for passive residual heat removal systems or spent nuclear fuel pools considering the concreate walls of the pool and main room above the pool.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.37-43
• /
• 2005

This paper presents a hybrid control algorithm for the active noise control in the rectangular enclosure using an active/passive foam actuator. The hybrid control composes of the adaptive feedforward with feedback loop in which the adaptive feedforward control uses the well-known filtered-x LMS(least mean square) algorithm and the feedback loop consists of the sliding mode controller and observer. The hybrid control has its robustness for both transient and persistent external disturbances and increases the convergence speed due to the reduced variance of the jiltered-x signal by adding the feedback loop. The sliding mode control (SMC) is used to incorporate insensitivity to parameter variations and rejection of disturbances and the observer is used to get the state information in the controller deign. An active/passive smart foam actuator is used to minimize noise actively using an embedded PVDF film driven by an electrical input and passively using an absorption-foam. The error path dynamics is experimentally identified in the form of the auto-regressive and moving-average using the frequency domain identification technique. Experimental results demonstrate the effectiveness of the hybrid control and the feasibility of the smart foam actuator.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.331-344
• /
• 1987

본 연구에서는 직사각형 밀폐공간내에서 자연대류와 복사의 상호 영향에 대해 서 P-1 근사를 이용하여 수치적으로 해석하였다.밀폐공간내에서의 온도분포, 속도 분포 및 열전달계수를 구하였으며 열경계층내에서의 전도와 복사의 상호 영향에 대하 여 고찰하였다. 표면 복사만이 존재하는 경우에 대해서도 고찰함으로써 P-1 근사의 적용한계를 규명하였다. 벽면을 산광 방사 및 반사체(diffuse emitter and reflec- tor)로, 기체는 회색체(gray body)로 가정하였다. 이는 복사 물성치의 파장에 따른 변화를 고려할 때의 대단히 복잡한 계산 과정을 피할 수 있고, 현재의 이론적 수준에 비추어 복사 열전달의 열향을 정성적으로 규명하는데 타당한 가정이다.