1 |
ANSYS, Module 07: Turbulence, in: Introduction to ANSYS Fluent, vol. 17, 0 Release, 12 April 2016.
|
2 |
ANSYS, Module 08: Heat Transfer, in: Introduction to ANSYS Fluent, vol. 17, 0 Release, 12 April 2016.
|
3 |
Wikipedia, Polycarbonate, viewed on, https://en.wikipedia.org/wiki/Polycarbonate. (Accessed 7 May 2018).
|
4 |
The Engineering ToolBox, Polymers - Specific Heats, viewed on, https://www.engineeringtoolbox.com/specific-heat-polymers-d_1862.html. (Accessed 7 May 2018).
|
5 |
Corning Glass Works, Pyrex - Glass Code 7740", viewed on, http://glassfab.com/wp-content/uploads/2015/08/Corning-Pyrex.pdf. (Accessed 7 May 2018).
|
6 |
AK Steel Corporation, 304/304L Stainless Steel, viewed on, http://www.aksteel.com/sites/default/files/2018-01/304304L201706_1.pdf. (Accessed 7 May 2018).
|
7 |
B.U. Bae, B.J. Yun, S. Kim, K.H. Kang, Design of condensation heat exchanger for the PAFS (passive auxiliary feedwater system) of APR+ (advanced power reactor plus), Ann. Nucl. Energy 46 (2012) 134-143.
DOI
|
8 |
S. Kim, B.U. Bae, Y.J. Cho, Y.S. Park, K.H. Kang, B.J. Yun, An experimental study on the validation of cooling capability for the Passive Auxiliary Feedwater System (PAFS) condensation heat exchanger, Nucl. Eng. Des. 260 (2013) 54-63.
DOI
|
9 |
S. Kim, D.E. Kim, S.U. Ryu, S.T. Lee, D.J. Euh, Experimental investigation on the natural convection flow in pool boiling, Nucl. Eng. Des. 280 (2014) 349-361.
DOI
|
10 |
The Engineering ToolBox, Water - Thermophysical Properties, viewed on, https://www.engineeringtoolbox.com/water-thermal-properties-d_162.html. (Accessed 7 May 2018).
|
11 |
Y.G. Park, M.Y. Ha, C. Choi, J. Park, Natural convection in a square enclosure with two inner circular cylinders positioned at different vertical locations, Int. J. Heat Mass Transf. 77 (2014) 501-518.
DOI
|
12 |
S. Kim, S.U. Ryu, D.J. Euh, C.H. Song, Experimental study on the thermal stratification in a pool boiling with a horizontal heat source, Ann. Nucl. Energy 106 (2017) 235-246.
DOI
|
13 |
H.F. Oztop, Z. Zhao, B. Yu, Fluid flow due to combined convection in lid-driven enclosure having a circular body, Int. J. Heat Fluid Flow 30 (2009) 886-901.
DOI
|
14 |
Y.G. Park, M.Y. Ha, H.S. Yoon, Study on natural convection in a cold square enclosure with a pair of hot horizontal cylinders positioned at different vertical locations, Int. J. Heat Mass Transf. 65 (2013) 696-712.
DOI
|
15 |
Y.G. Park, M.Y. Ha, J. Park, Natural convection in a square enclosure with four circular cylinders positioned at different rectangular locations, Int. J. Heat Mass Transf. 81 (2015) 490-511.
DOI
|
16 |
D.H. Kang, M.Y. Ha, H.S. Yoon, C. Choi, Bifurcation to unsteady natural convection in square enclosure with a circular cylinder at Rayleigh number of , Int. J. Heat Mass Transf. 64 (2013) 926-944.
DOI
|
17 |
G.S. Mun, J.H. Doo, M.Y. Ha, Thermo-dynamic irreversibility induced by natural convection in square enclosure with inner cylinder. Part-I: effect of tilted angle of enclosure, Int. J. Heat Mass Transf. 97 (2016) 1102-1119.
DOI
|
18 |
H.J. Lee, J.H. Doo, M.Y. Ha, H.S. Yoon, Effects of thermal boundary conditions on natural convection in a square enclosure with an inner circular cylinder locally heated from the bottom wall, Int. J. Heat Mass Transf. 65 (2013) 435-450.
DOI
|
19 |
Y.M. Seo, J.H. Doo, M.Y. Ha, Three-dimensional flow instability of natural convection induced by variation in radius of inner circular cylinder inside cubic enclosure, Int. J. Heat Mass Transf. 95 (2016) 566-578.
DOI
|
20 |
C. Choi, S. Jeong, M.Y. Ha, H.S. Yoon, Effect of a circular cylinder's location on natural convection in a rhombus enclosure, Int. J. Heat Mass Transf. 77 (2014) 60-73.
DOI
|
21 |
S.H. Lee, Y.M. Seo, H.S. Yoon, M.Y. Ha, Three-dimensional natural convection around an inner circular cylinder located in a cubic enclosure with sinusoidal thermal boundary condition, Int. J. Heat Mass Transf. 101 (2016) 807-823.
DOI
|
22 |
B. Souayeh, N. Ben-Cheikh, B. Ben-Beya, Numerical simulation of three-dimensional natural convection in a cubic enclosure induced by an isothermally-heated circular cylinder at different inclinations, Int. J. Therm. Sci. 110 (2016) 325-339.
DOI
|
23 |
A. Kumar, J.B. Joshi, A.K. Nayak, P.K. Vijayan, 3D CFD simulation of air cooled condenser-I: natural convection over a circular cylinder, Int. J. Heat Mass Transf. 78 (2014) 1265-1283.
DOI
|
24 |
M.S. Gandhi, J.B. Joshi, A.K. Nayak, P.K. Vijayan, Reduction in thermal stratification in two phase natural convection in rectangular tanks: CFD simulations and PIV measurements, Chem. Eng. Sci. 100 (2013) 300-325.
DOI
|
25 |
M.S. Gandhi, M.J. Sathe, J.B. Joshi, P.K. Vijayan, Two phase natural convection: CFD simulations and PIV measurement, Chem. Eng. Sci. 66 (2011) 3152-3171.
DOI
|
26 |
August ANSYS, ANSYS Fluent Theory Guide, 17.2, Release, 2016.
|
27 |
M.S. Gandhi, J.B. Joshi, P.K. Vijayan, Study of two phase thermal stratification in cylindrical vessels: CFD simulations and PIV measurements, Chem. Eng. Sci. 98 (2013) 125-151.
DOI
|
28 |
S. Kelm, J. Lehmkuhl, W. Jahn, H.J. Allelein, A comparative assessment of different experiments on buoyancy driven mixing processes by means of CFD, Ann. Nucl. Energy 93 (2016) 50-57.
DOI
|
29 |
A. Papukchiev, S. Buchholz, Validation of ANSYS CFX for gas and liquid metal flows with conjugate heat transfer within the European project Thins, Nucl. Eng. Des. 312 (2017) 338-350.
DOI
|
30 |
August ANSYS, ANSYS Fluent User's Guide, 17.2, Release, 2016.
|
31 |
J. Mahaffy, et al., Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Applications, NEA/CSNI/R, 2007, p. 5.
|
32 |
J. Mahaffy, et al., Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Applications - Revision, NEA/CSNI/R, 2014, p. 11.
|
33 |
F. Menter et al., CFD Best Practice Guidelines for CFD Code Validation for Reactor - Safety Applications, EU Project Evaluation of Computational Fluid Dynamic Methods for Reactor Safety Analysis (ECORA) under Contract No: FIKS-CT-2001-00154.
|
34 |
M. Casey, T. Wintergerste, ERCOFTAC Special Interest Group on Quality and Trust in Industrial CFD, in: Sulzer Innotec, Fluid Dynamics Laboratory, January 2000. Version 1.0.
|
35 |
ANSYS, Module 09: Best Practice Guidelines. Introduction to ANSYS Fluent, vol. 17, 0 Release, 12 April 2016.
|