• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.21-29
• /
• 2012

A dual loop waste heat recovery system with Rankine steam cycles for the improvement of fuel efficiency of gasoline vehicles has been investigated. A high temperature loop (HT loop) only recovers the heat of the exhaust gas. A low temperature loop (LT loop) recovers the residual heat from the HT loop, the coolant heat and the remaining exhaust gas heat. The two separate loops are coupled with a heat exchanger. This paper has dealt with a layout of the dual loop system, the review of the working fluids, and the design of the cycle. The design point and the target heat recovery of the HT boiler, a core part of a HT loop, have been presented. The prototype of the HT boiler was evaluated by experiment. For the performance evaluation of the HT boiler, inlet temperature of the HT boiler working fluid was set equal to the temperature degree of sub-cool of $5^{\circ}C$ at the condensing pressure. The exit condition was the degree of super-heat set at $5^{\circ}C$. The characteristics of the HT boiler such as heat recovery and pressure drops of fluids were evaluated with varying flow rates and inlet temperatures of exhaust gas under various evaporating pressure conditions.

• 전력전자학회논문지
• /
• 제11권6호
• /
• pp.494-501
• /
• 2006

본 논문에서는 TERES(TEchnology of REciprocal Sustainer)회로와 같은 유지구동전압 저감형 구동회로의 성능을 개선하기 위해 새로운 AC PDP용 에너지 회수회로를 제안하였다. TERES회로에서는 유지구동전압이 일반적인 AC PDP용 구동회로의 절반이지만 에너지 회수회로가 없다. 제안한 회로에서는 에너지 회수회로를 설치하여 효율을 높이고 ZVS 또는 ZCS의 구현으로 스위칭소자의 손실을 줄인다. 에너지 회수회로가 추가되었음에도 불구하고 제안한 회로의 능동스위칭 소자 수가 TERES회로와 동일하다. 제안한 회로의 동작을 모드별로 해석하였으며 시뮬레이션과 실험을 통하여 유용성을 입증하였다.

• 방사선산업학회지
• /
• 제10권4호
• /
• pp.199-204
• /
• 2016

The dependence of cell survival on exposure dose and the duration of the liquid-holding recovery (LHR) was obtained for diploid yeast cells irradiated with ionizing radiation of different linear energy transfer (LET) and recovering from radiation damage without and with various concentrations of cisplatin - the most widely used anticancer drug. The ability of yeast cells to recover from radiation damage was less effective after cell exposure to high-LET radiation, when cells were irradiated without drug. The increase in cisplatin concentration resulted in the disappearance of this difference whereas the fraction of irreversible damage was permanently enlarged independently of radiation quality. The probability of cell recovery was shown to be constant for various conditions of irradiation and recovery. A new mechanism of cisplatin action was suggested according with which the inhibition of cell recovery after exposure to ionizing radiations was completely explained by the production of irreversible damage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.976-995
• /
• 2016

Workflow scheduling is one of the challenging problems in cloud computing, especially when service reliability is considered. To improve cloud service reliability, fault tolerance techniques such as fault recovery can be employed. Practically, fault recovery has impact on the performance of workflow scheduling. Such impact deserves detailed research. Only few research works on workflow scheduling consider fault recovery and its impact. In this paper, we investigate the problem of workflow scheduling in clouds, considering the probability that cloud resources may fail during execution. We formulate this problem as a multi-objective optimization model. The first optimization objective is to minimize the overall completion time and the second one is to minimize the overall execution cost. Based on the proposed optimization model, we develop a heuristic-based algorithm called Min-min based time and cost tradeoff (MTCT). We perform extensive simulations with four different real world scientific workflows to verify the validity of the proposed model and evaluate the performance of our algorithm. The results show that, as expected, fault recovery has significant impact on the two performance criteria, and the proposed MTCT algorithm is useful for real life workflow scheduling when both of the two optimization objectives are considered.

• 자원리싸이클링
• /
• 제24권4호
• /
• pp.12-21
• /
• 2015

일반적으로 구리제련 슬래그내 구리함량은 0.5-3.7% 혹은 그 이상의 높은 비율로 포함되어 있며, 슬래그내 구리회수에 대한 대표적인 방법으로는 부유선별, 침출 그리고 배소가 있다. 본 연구에서는 부유선별법에 의한 구리 회수방법을 검토하였으며, 잔세이트포수제를 이용한 황화부선을 수행하였다. 산성과 알칼리 조건에서 부유선별 특성을 관찰하였으며, pH 4 에서 구리회수율 50%, pH 11 에서 구리회수율 67%로 나타났으며, 특히 pH 11에서는 $100{\mu}m$ 이상의 입자가 정광으로 부유되어 회수율이 상대적으로 높게 나타나는 경향을 보였다. 슬래그 입도를 200 mesh 이하로 분쇄하여 단체분리도를 향상시켜 pH조건별 부유선별 실험을 수행한 결과, 회수율이 78 - 83%까지 향상되는 것을 확인할 수 있었다.

• 한국전자거래학회지
• /
• 제4권2호
• /
• pp.23-40
• /
• 1999

Nowadays, major application of public key certification technology based on PKI(Public Key Infrastructure) is electronic commerce. Public key certification technology may include various sub-technologies such as key recovery, secret sharing, certificate/key management, and directory system technology. This thesis discusses PKI-based certification authority technology for electronic commerce on the Internet.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.277-280
• /
• 2017

Destablization and demulsification is a difficult task for the treatment of waste oil-in-water drilling fluid because of its "three-high" characteristics: emulsification, stabilization and oiliness. At present, China is short for effective treating technology, which restricts cleaner production in oilfield. This paper focused on technical difficulties of waste oil-in-water drilling fluid treatment in JiDong oilfield of China, adopting physical-chemical collaboration demulsification technology to deal with waste oil-in-water drilling fluid. After oil-water-solid three-phase separation, the oil recovery rate is up to 90% and the recycled oil can be reused for preparation of new drilling fluid. Meanwhile, harmless treatment of wastewater and sludge from waste oil-in-water drilling fluid after oil recycling was studied. The results showed that wastewater after treated was clean, contents of chemical oxygen demand and oil decreased from 993 mg/L and 21,800 mg/L to 89 mg/L and 3.6 mg/L respectively, which can meet the requirements of grade one of "The National Integrated Wastewater Discharge Standard" (GB8978); The pollutants in the sludge after harmless treatment are decreased below the national standard, which achieved the goal of resource recovery and harmless treatment on waste oil-in-water drilling fluid.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.996-1001
• /
• 2009

The purposes of this work were suggested and validated the methods of heat recovery from dyeing wastewater exhausted in Sihwa and Banwol dyeing industrial park. We analyzed the present conditions of heat supplies and demands. So it was made a selection of the system combined heat exchanger for waste heat recovery and the high temperature heat pump. We decided the specifications of the heat recovery facilities. After this, economical assessment is performed to this system. The payback periods are within 4 years, 20 years and 5 years in case of K company, S company and A company. In addition, when they are produced the heat of same capacity, quantities of pollutants from used fuels were calculated.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.697-703
• /
• 2010

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants from the outdoor air introduced into a clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is useful for reducing the outdoor air conditioning load required to maintain a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to cool or heat the outdoor air. In the present study, numerical analysis was conducted to evaluate the recovered heat of an exhaust air heat recovery type air washer system, which is the key part of an energy saving outdoor air conditioning system for semiconductor clean rooms. The present numerical results showed relatively good agreement with the available experimental data.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.226-231
• /
• 1996

복숭아 펄프를 serum-pulp방법에 따라 serum과 불용성 펄프로 분리하고 serum만을 농축하면서 초기에 발생하는 증기를 회수하여 방향성분 획분으로 사용하였다. 농축 복숭아 펄프는 농축 serum, 불용성 펄프와 회수한 방향성분을 흔합제조하여 전체적으로 2배 농축하였다. 농축 복숭아 펄프의 향기성분은 DHC법으로 추출하여 GC와 GC/MS로 분석하고 관능검사한 결과 10%회수된 방향성분 획분을 첨가하는 것이 우수한 향기성분을 유지하는 고품질의 농축 펄프를 생산하는데 적합한 조건으로 나타났다.