• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4786-4793
• /
• 2012

In a recent mobile computing environment, the research for a transaction model have been actively carried out to deal with real-time transaction. However, the research for recovery model is relatively insufficient. Therefore, it would be very important for mobile recovery methods for database stability, just in case of data loss due to hand-off in mobile computing system. So, further efficient research should be keenly done to reduce I/O hand-off in mobile computing systems. SLL method increases I/O time due to sequential file. This paper have been suggested to efficient mobile recovery method in mobile computing system. Finally, it has been clearly demonstrated for system efficiency, conducting the performance assessment that currently proposed recovery system.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.22-29
• /
• 2011

In this study, the damage mechanism of large scale steam turbine due to water induction was analyzed and recovery characteristics were reviewed. A turbine consists of the rotating rotor and the stationary casing, and the clearance between them is very small for the efficiency enhancement. If water induction, while relatively cold steam or water is introduced into turbine, occurs, the considerable humping is caused at the casing near the initial water induction point and that induces the rubbing between rotor and casing. Finally, it leads to the catastrophic failure. Bowed rotor has the different characteristics in the recovery depending on damage degree. The elastic deformation due to light rubbing is recovered by turning the rotor with 3 rpm under normal operation condition, but most plastic deformation due to rubbing deforms the local microstructure and that results in permanent deformation which could not be recovered under normal operation condition. Bowed rotor has diverse characteristics depending on the recovery method, and the method is empirical and needs the cutting edge technology. Careful recovery treatment of the rotor will eliminate the risks and secure the high quality rotor similar to new rotor. If any critical error is made during the recovery, the rotor would not be recovered permanently and it should be scrapped.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.329-333
• /
• 2019

Solution-processed oxide thin-film transistors (TFTs) have garnered great attention, owing to their many advantages, such as low-cost, large area available for fabrication, mechanical flexibility, and optical transparency. Negative bias stress (NBS)-induced instability of sol-gel IGZO TFTs is one of the biggest concerns arising in practical applications. Thus, understanding the bias stress effect on the electrical properties of sol-gel IGZO TFTs and proposing an effective recovery method for negative bias stressed TFTs is required. In this study, we investigated the variation of transfer characteristics and the corresponding electrical parameters of sol-gel IGZO TFTs caused by NBS and positive bias recovery (PBR). Furthermore, we proposed an effective PBR method for the recovery of negative bias stressed sol-gel IGZO TFTs. The threshold voltage and field-effect mobility were affected by NBS and PBR, while current on/off ratio and sub-threshold swing were not significantly affected. The transfer characteristic of negative bias stressed IGZO TFTs increased in the positive direction after applying PBR with a negative drain voltage, compared to PBR with a positive drain voltage or a drain voltage of 0 V. These results are expected to contribute to the reduction of recovery time of negative bias stressed sol-gel IGZO TFTs.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.239-242
• /
• 2005

A high speed address recovery technique for AC plasma display Panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, the technique shows the minimum address power consumption according to various displayed images, different from Prior methods operating in fixed mode regardless of images. Test results with 50" HD single-scan PDP(resolution = 1366$\times$768) show that less than 350ns of recovery time is successfully accomplished and about 54% of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.450-453
• /
• 2005

A high speed address recovery technique for AC plasma display panel(PDP) is proposed. Replacing GND switch by clamping diode. the recovery speed can be increased by saving GND hold-time and switching loss due to GND switch also becomes also be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Test results with 50' HD single-scan PDP(resolution = 1366$\times$768) show that less than 3sons of recovery time is successfully accomplished and about$54\%$ of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.206-216
• /
• 2022

BACKGROUND: Dithiocarbamate fungicide propineb can be analyzed quantitatively by derivatization reaction followed by HPLC/UVD, which has high reproducibility and stability. However, the presence of high protein in soybeans and peas affects the derivatization process resulting in extremely low recoveries. Therefore, this study was conducted to improve the analytical method for analysis of propineb in soybeans and peas by applying a deproteinization process using chloroform-gel method. METHODS AND RESULTS: The deproteinization process was carried out up to 6 times for soybeans and 5 times for peas using 50 mL chloroform. After 4 times of deproteinization process followed by a derivatization reaction with methyl iodide, the recovery yields of propineb in both pulses were >90%. However, the recovery yield tended to decrease when the deproteinization process was performed more than 5 times. The method limit of quantification (LOQ) was 0.04 mg/L. The recovery conducted in triplicate at 10 times and 50 times of the LOQ ranged from 87.2 to 95.0 % with a coefficient of variation <10%. CONCLUSION(S): This study confirmed that 4 times of deproteinization process using the chloroform-gel method was effective when derivatizing and analyzing dithiocarbamate fungicides in pulses with high protein content. However, depending on the initial protein content present in the pulses, there was a difference in the recovery: the lower the protein content, the higher the recovery rate of propineb. It is expected that the method proposed in this study could be applied to remove high content of protein as analytical interference substance from agricultural samples.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.327-343
• /
• 2001

This is a survey article on finite element a posteriori error estimates with an emphasize on gradient recovery type error estimators. As an example, the error estimator based on the ZZ patch recovery technique will be discussed in some detail.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.109-114
• /
• 2003

WS-BPMS(web service driven business process management system)은 기업 내 또는 비즈니스 파트너들 간의 비즈니스 프로세스를 체계적으로 통합, 관리하여 프로세스를 개선하고 자동화한다. 이는 비즈니스 프로세스를 검색한 후 BPEL4WS, BPML 등의 프로세스 메타모델을 이용하여 새 프로세스를 디자인하고 BPMS위에 전개 실행하는 과정을 거치게 된다. 디자인된 프로세스는 복잡하여 그 실행에 있어 체계적이고 확고한 기반을 바탕으로 운영되어야 한다. 이를 위해 본 논문에서는 BPMS의 운영에 있어 pi-calculus를 기반으로 한 structured exception handling 방법론과 transaction 모니터링을 통한 backward recovery 방법을 제시한다.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.747-750
• /
• 2008

Response and recovery plan is necessary to protect against urban flood which can cause damage on property and human life. In this research, urban flood response and recovery plans were studied to improve an establishment method for local autonomous entities. The result of this research will be applied to make a manual for forming response and recovery plan in Korea.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.507-516
• /
• 2014

We present a hybrid method for spectral reflectivity recovery, using 3D extrapolation as a supplemental method for 3D interpolation. The proposed 3D extrapolation is an extended version of 3D interpolation based on the barycentric algorithm. It is faster and more accurate than the conventional spectral-recovery techniques of principal-component analysis and nonnegative matrix transformation. Four different extrapolation techniques (based on nearest neighbors, circumcenters, in-centers, and centroids) are formulated and applied to recover spectral reflectivity. Under the standard conditions of a D65 illuminant and 1964 $10^{\circ}$ observer, all reflectivity data from 1269 Munsell color chips are successfully reconstructed. The superiority of the proposed method is demonstrated using statistical data to compare coefficients of correlation and determination. The proposed hybrid method can be applied for fast and accurate spectral reflectivity recovery in image processing.