• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.411-415
• /
• 2008

This paper presents on design factor considered in an altitude test cell facility to determine the best sizing to optimize exhaust diffuser pressure recovery and the exact cooling load required to be supplied under transient operation. Engine simulation was performed to analyse the exhaust gas temperature, exit mass flow rate, specific fuel consumption and exhaust velocity helpful in determining secondary mass air flow and the mixed air temperature entering the ejector. based on this, the amount of cooling load was deduced. It was found that improved pressure recovery reduces operational cost(air supply facility, cooling water).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.372-380
• /
• 2008

In order to control indoor air quality and save energy, it is needed to install a suitable ventilation system equipped with heat exchanger for heat recovery. Paper heat exchanger can recover $50{\sim}70%$ of the enthalpy difference between supply and exhaust air. The purpose of this research is to obtain the experimental correlations for the friction factor, heat transfer coefficient, mass transfer coefficient and permeance of paper heat exchanger, which can be used to predict the performance of the paper heat exchanger. Pressure drops at various velocities, and sensible and latent heat transfer rates at various dry-bulb temperatures, relative humidities and specific humidities are measured to derive experimental correlations. The results of prediction using correlations show fairly good agreement with the experimental data obtained in the actual operating conditions.

• Journal of Agricultural Extension & Community Development
• /
• v.29 no.2
• /
• pp.51-64
• /
• 2022

This study aims to investigate relationships between lifestyle and benefit sought of rural healing tourists. For data collection, a total of 3,000 copies of questionnaires were collected by nationwide online survey. The data were analyzed by using SPSS 26.0. The factor analysis identified seven dimensions of the lifestyle : conservative, sports activity orientation, health orientation, consumption orientation, achievement orientation, adventure orientation, and personal orientation. Five dimensions of benefit sought were identified as psychological recovery, outdoor activities, rest, rural experience, and exercise. The results of the canonical correlation analysis indicated that adventure orientation of lifestyle and psychological recovery, outdoor activities, rural experience, exercise of benefit sought were highly correlated. This means it is important to place an emphasis on psychological recovery, outdoor activities, rural experience, and exercise for tourists looking for an adventure away from everyday life. Rural healing tourism marketers should consider lifestyle aspects as the most important factors affecting benefit sought of rural healing tourism.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.6
• /
• pp.311-320
• /
• 2023

When an earthquake occurs, the severity of damage is determined by natural factors such as the magnitude of the earthquake, the epicenter distance, soil properties, and type of the structures in the affected area, as well as the socio-economic factors such as the population, disaster prevention measures, and economic power of the community. This study evaluated the direct economic loss due to building damage and the community's recovery ability. Building damage was estimated using fragility functions due to the design earthquake by the seismic design code. The usage of the building was determined from the information in the building registrar. Direct economic loss was evaluated using the standard unit price and estimated building damage. The standard unit price was obtained from the Korean Real Estate Board. The community's recovery capacity was calculated using nine indicators selected from regional statistical data. After appropriate normalization and factor analysis, the recovery ability score was calculated through relative evaluation with neighboring cities.

• Journal of Service Research and Studies
• /
• v.9 no.4
• /
• pp.97-114
• /
• 2019

The relationship quality and recovery of service failures perceived by consumers play an essential role in affecting the service provider's image and sales in terms of the highly involved service industry. In particular, implementation of successful relationship marketing strategies and effective recovery of service failures provide greater satisfaction for customers expecting customized services and reinforce the relationships between the companies and consumers. Based on these previous studies, this research conducted to find out the causal relationship between the variables influencing service recovery expectations and word of mouth(WOM) by approaching the severity of service failures from the perspective of relationship marketing and attribution theory. For the empirical analysis of this research, we conducted a questionnaire surveys of 360 service users of beauty salons, who have experienced in high-involvement services, and utilized 333 questionnaires for the final analysis. The hypothesis was experimented using the Structural Equation Model(SEM), and the results are as follows. First, we identified that the higher the customer perceived the severity of the service failure, the lower the quality of the relationship. Second, we verified that service users observed service failure as a temporary and uncontrollable factor as they distinguished service quality as higher. Third, the hypothesis that customers recognize service failures as a temporary one has a positive impact on service recovery expectation level is determined through empirical analysis. Forth, it was figured out that the higher the perceived quality of the relationship with the service provider, the higher the service recovery level expected by the consumers. At the same time, the hypothesis that optimism for service recovery expectation affects positive word of mouth has been verified. The results of this study help develop the customer-oriented business model of the service companies. Furthermore, the academic significance in that it suggested a new direction for the research of high-involvement service marketing.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1511-1516
• /
• 2007

Because Seaming process of MPJ (Mechanical Press Joining) has various design factors such as thickness, bending radius, seaming width, caulking press width and the dynamic factor such as multistage plastic working, elastic recovery, residual stress, the optimum conditions can't be easily determined. Using a design of experiment based on the FEM, which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor during drum MPJ and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.85-91
• /
• 2008

A Boost Power Factor Correction (PFC) Converter employing Zero Voltage Switching (ZVS) based Compound Active Clamping (CAC) technique is presented in this paper. An Electro Magnetic Interference (EMI) Filer is connected at the line side of the proposed converter to suppress Electro Magnetic Interference. The proposed converter can effectively reduce the losses caused by diode reverse recovery. Both the main switch and the auxiliary switch can achieve soft switching i.e. ZVS under certain condition. The parasitic oscillation caused by the parasitic capacitance of the boost diode is eliminated. The voltage on the main switch, the auxiliary switch and the boost diode are clamped. The principle of operation, design and simulation results are presented here. A prototype of the proposed converter is built and tested for low input voltage i.e. 15V AC supply and the experimental results are obtained. The power factor at the line side of the converter and the converter efficiency are improved using the proposed technique.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1092-1101
• /
• 2002

The objective of this study is to develop energy saving strategies for indoor swimming pools and to estimate the effect of each energy saving strategy. For this purpose, field measurements regarding pool water heating energy, domestic hot water heating energy are conducted and a base energy consumption model is implemented using the DOE-2.1E program. The results of the study reveal that 25% of the total pool water heating energy may be saved by using night time pool covers, 27% of the total domestic hot water heating energy may be saved by using a waste water heat recovery system (effic. 60%), and of the total ventilation energy may be saved using an exhaust air heat recovery system (effic. 60%).

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.320-321
• /
• 2011

As the scale of industries expands, the facilities of the industrial customer become larger and more complex. When a fault occurs in the system, the circuit breakers play an important role in minimizing causalitites by quickly tripping the faulted line. Since the capacity of the receiving-end has increased in size, an examination is needed to be performed between the industrial customers and the conventional circuit breakers. The transient recovery voltage, which is the initial transient characteristics of the voltage across the breaker when tripped, is an important factor in determining the circuit breaker's performance. In this paper, a TRV analysis on the large-scale industrial customer is being performed utilizing PSCAD/EMTDC.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2197-2198
• /
• 2006

본 논문은 역률개선 효과가 있는 MERS(Magnetic Enery recovery switch)를 사용하여 에너지 효율에서의 결과를 입증하고자 한다. 전원과 유도성부하에 직렬 연결된 MERS는 Full Bridge와 비슷한 구성으로 전력용 MOSFET(or IGBT) SWITCH 4개와 전해 DC콘덴서 1개로 구성되어진다. MERS의 콘덴서는 부하와 콘덴서의 리액턴스, $X_C<X_L$을 만족하는 콘덴서의 용량을 선택하고 콘덴서에 충전된 전압에 의해 부하의 유도계수를 보상하여 역률을 1로 추종하며 개선된다. 이때 스위치는 전원 전압에 대해 zero-voltage switching 과 zero-current switching을 하게 된다. 만약 부하가 변하더라도 $X_C<X_L$을 만족한다면 자동적으로 역률은 1에 맞추어지게 된다