• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.116-123
• /
• 2019

Angelica gigas Nakai (AGN) is a traditional medicinal herb especially in Korea. It contains pyranocoumarins, which are major active components including decursin (D) and decursinol angelate (DA). This study was carried out to determine the change in active component content and antioxidant activity depending on the root diameter of AGN. Several processing steps are involved to use AGN roots as medicine. The dried AGN roots are divided into body (B), thick root (TkR), medium root (MR) and thin root (TnR) according to their diameter before cutting into medicine. The recovery rates of each root parts per 100 kg were measured as $32.3{\pm}2.5$, $9.0{\pm}1.0$, $39.3{\pm}2.1$ and $15.0{\pm}1.0%$, respectively and the mean diameters were measured as $51.95{\pm}4.55$, $7.05{\pm}0.89$, $2.88{\pm}0.49$ and $1.57{\pm}0.32mm$. Two index components, D and DA, were analyzed. The change of both D and DA content showed a similar tendency. Both D and DA content were increased as the root diameter decreased (higher in TnR). In addition, antioxidant activity was higher in B and TnR, and lower in TkR and MR than control. This study showed that the thinner the root diameter, the higher the D and DA content in AGN roots and that TnR has excellent antioxidant activity compared to other root parts, suggesting that the thinner root part of AGN could be used as a potential material.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.233-245
• /
• 2021

Many studies on the microstructures in rocks have been conducted using experimental methods with various equipment as well as natural rock studies to see the development of microstructures and understand their mechanisms. Grain boundary migration of mineral aggregates in rocks could cause grain growth or grain size changes during metamorphism or deformation as one of the main recrystallization mechanisms. This study suggests improved ways regarding the analog material experiments with reformed equipment to see sequential observations of these grain boundary migration. It can be more efficient than the existing techniques and carry out an appropriate microstructure analysis. This reformed equipment was implemented to enable optical manipulation by mounting polarizing plates capable of rotating operation on a stereoscopic microscope and a deformation rig capable of experimenting with analog materials. The equipment can automatically control the temperature and strain rate of the deformation rig by microcontrollers and programming and can take digital photomicrographs with constant time intervals during the experiment to observe any microstructure changes. The composite images synthesized using images by rotated polarizing plates enable us to see more accurate grain boundaries. As a rock analog material, norcamphor(C7H10O) was used, which has similar birefringence to quartz. Static grain growth and simple shear deformation experiments were performed using the norcamphor to verify the effectiveness of the equipment. The static grain growth experiments showed the characteristics of typical grain growth behavior. The number of grains decreases and the average grain size increases over time. These case experiments also showed a clear difference between the growth curves with three temperature conditions. The result of the simple shear deformation experiment under the medium temperature-low strain rate showed no significant change in the average grain size but presented the increased elongation of grain shapes in the direction of about 53° regarding the direction perpendicular to the shearing direction as the shear strain increases over time. These microstructures are interpreted as both the plastic deformation and the internal recovery process in grains are balanced by the deformation under the given experimental conditions. These experiments using the reformed equipment represent the ability to sequentially observe changing the microstructure during experiments as desired in the tests with the analog material during the entire process.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.112-117
• /
• 2011

This study was conducted for searching the functional feeding groups, and community stability of the macroinvertebrate on forest fire area of Uljin-gun. The samples were collected from 2 sites of control area and 2 sites of experimental area during 2007 to 2009. The identified species were 89 belonged to 47 families, 16 order, 6 class, and 4 phylum in control area. And 84 belonged to 43 families, 16 order, 6 class, and 4 phylum were identified in experimental area. As a result of changes in species and individuals of E.P.T. taxa investigated in experimental area by year, Ephemeroptera was 21 species, $2,434.6inds./m^2$, Plecoptera was 3 species, $199.8inds./m^2$, and Trichoptera 14 species, $540.2inds./m^2$ in 2007. And in 2009, Ephemeroptera was 9 species, $296inds./m^2$, Trichoptera was 4 species, $44.4inds./m^2$, and Plecoptera was none, showing that species and individuals belonging to E.P.T. taxa decrease rapidly every year. Community analysis by year, in 2008 when the water system started to be influenced by the fire directly, it showed a trend that H' and RI decreased in the experimental area. Functional feeding group by year, it showed a trend that species and individuals of GC type which is a functional group picking up and eating FPOM (fine particulate organic matter) from deposits in the bottom of water or benthic areas and performs an important function of material circulation in ecosystem decrease every year. Community stability by year, an environment of water system in forest fire area started to be somewhat destroyed, from 2008, it is shown that both species in I area which have great ability of resistance and recovery and species in III area which live in relatively stable water system decreased a little.

• (The) Korean Journal of Educational Psychology
• /
• v.32 no.1
• /
• pp.99-130
• /
• 2018

The purpose of this study was to examine the longitudinal relationship between resilience and social support of school violence exposure types including school bullying, victimization, and dual experience. The study used data obtained from the third year (2012) of the Seoul Education Longitudinal Study of 1,137 elementary school students in grade 6 who reported experiencing school violence. The results of the autoregressive cross-lagged model are as follows. First, as a result of measuring the self-regression coefficients of resilience and social support of the youth exposed to school violence at 3 time points (2012, 2014, and 2016), it was found for all types of violence that resilience and social support at the previous time point showed a signigicant positive effect on the same variable at the next time point. Second, in the case of the cross-lagged effects of resilience and social support, the effect of previous social support on resilience at the next time point was statistically significant for the victimization group, but not for the bullying or dual experience groups. Third, considering the opposite path from resilience to social support, resilience at the previous time point had a significant influence on the social support at the next time point for both the bullying and victimization groups. This result is new and can be complementary to the cross-sectional studies so far using a longitudinal view. The results of this study suggest that the bullying and victimized students who are relatively more resilient are less likely to perceive social support than those who are not resilient. Finally, we discuss the longitudinal relationship between resilience and social support, the limitations of this study, and implications for future research.

• Ecology and Resilient Infrastructure
• /
• v.9 no.1
• /
• pp.77-82
• /
• 2022

This study aims to understand how mobile and stationary air pollution sources affect the air quality and soil properties in urban parks. We selected three sites of urban parks in Seoul as follows: Ha-neul Park in Mapo-gu (Site_M), Ill-won Eco-Park in Gangnam-gu (Site_G), and Yangjae Citizen's Forest in Seocho-gu (Site_Y), and compared the results of each site's traffic volume, air quality concentration, and soil analysis. Traffic volume was high in Site_M, followed by Site_G and Y; Site_M and G were closer to the resource recovery facility than Site_Y. Hence, we hypothesized that PM and NO₂ concentrations in the atmosphere were higher in Site_M than Site_G and Y, causing different soil nitrogen content among sites due to different atmospheric deposition. Consistent with our hypothesis, the concentrations of PM2.5 and NO₂ were higher in Site_M and G than Site_Y, while Site_Y had higher PM10 than other sites. The soil NO₃^- contents showed no significant difference among three sites, whereas the soil NH₄+ content was extremely high in Site_Y. This high content of soil NH₄⁺ is thought to be due to acidification from excessive fertilization. Lower soil pH of Site_Y further supported the evidence of heavy fertilization in this site. Overall nitrogen dynamics implies that soil nitrogen status is more influenced by park management such as fertilization rather than atmospheric deposition. Despite of lower soil NH₄⁺ content of Site_M and G than Y, vegetation vitality looked similar among three sites. This indirectly indicates that excessive fertilizer input in urban park management needs to be reconsidered. This study showed that even if the air quality was different due to mobile and stationary sources, it did not directly affect the soil nitrogen nutrient status of the adjacent urban park.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.345-358
• /
• 2021

This study focuses on the development of the liquid air production process that uses LNG (liquefied natural gas) cold energy which usually wasted during the regasification stage. The liquid air can be transported to the LNG exporter, and it can be utilized as the cold source to replace certain amount of refrigerant for the natural gas liquefaction. Therefore, the condition of the liquid air has to satisfy the available pressure of LNG storage tank. To satisfy pressure constraint of the membrane type LNG tank, proposed process is designed to produce liquid air at 1.3bar. In proposed process, the air is precooled by heat exchange with LNG and subcooled by nitrogen refrigeration cycle. When the amount of transported liquid air is as large as the capacity of the LNG carrier, it could be economical in terms of the transportation cost. In addition, larger liquid air can give more cold energy that can be used in natural gas liquefaction plant. To analyze the effect of the liquid air production amount, under the same LNG supply condition, the proposed process is simulated under 3 different air flow rate: 0.50 kg/s, 0.75 kg/s, 1.00 kg/s, correspond to Case1, Case2, and Case3, respectively. Each case was analyzed thermodynamically and economically. It shows a tendency that the more liquid air production, the more energy demanded per same mass of product as Case3 is 0.18kWh higher than Base case. In consequence the production cost per 1 kg liquid air in Case3 was $0.0172 higher. However, as liquid air production increases, the transportation cost per 1 kg liquid air has reduced by $0.0395. In terms of overall cost, Case 3 confirmed that liquid air can be produced and transported with $0.0223 less per kilogram than Base case.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2022

Heavy metals can be intentionally or unintentionally introduced into plastic food utensils, containers, and packaging (PFUCP) as additives or contaminants, which can be ingested with food by humans. Here, seven-heavy metals (lead, cadmium, nickel, chromium, antimony, copper, and manganese) with toxicity concerns were selected, and risk assessment was done by establishing their migration from 137 PFUCP products made of 16 materials distributed in Korea. Migration of heavy metals was examined by applying 4% acetic acid as a food simulant (70℃, 30 minutes) to the PFUCP products. Inductively coupled plasma mass spectrometry (ICP-MS) was employed for the analysis of migrated heavy metals, and the reliability of quantitative results was confirmed by checking linearity, LOD, LOQ, recovery, precision, and expanded uncertainty. As a result of monitoring, heavy metals were detected at a level of non-detection to 8.76 ± 11.87 ㎍/L and most of the heavy metals investigated were only detected at trace amounts of less than 1 ㎍/L on average. However, antimony migrated from PET products was significantly higher than other groups. Risk assessment revealed that all the heavy metals investigated were safe with a margin of exposure above 311. Collectively, we demonstrated that heavy metals migrated from PFUCP products distributed in Korea appear to be within the safe range.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.235-252
• /
• 2022

Forward osmotic pressure-free reverse osmosis (Δ𝜋=0 RO) was invented in 2013. The first patent (US 9,950,297 B2) was registered on April 18, 2018. The "Osmotic Pressure of Concentrated Solutions" in JACS (1908) by G.N. Lewis of MIT was used for the estimation. The Chang's RO system differs from conventional RO (C-RO) in that two-chamber system of osmotic pressure equalizer and a low-pressure RO system while C-RO is based on a single chamber. Chang claimed that all aqueous solutions, including salt water, regardless of its osmotic pressure can be separated into water and salt. The second patent (US 10.953.367B2, March 23, 2021) showed that a low-pressure reverse osmosis is possible for 3.0% input at Δ𝜋 of 10 to 12 bar. Singularity ZERO reverse osmosis from his third patent (Korea patent 10-22322755, US-PCT/KR202003595) for a 3.0% NaCl input, 50% more water recovery, use of 1/3 RO membrane area, and 1/5th of theoretical energy. These numbers come from Chang's laboratory experiments and theoretical analysis. Relative residence time (RRT) of feed and OE chambers makes Δ𝜋 to zero or negative by recycling enriched feed flow. The construction cost by S-ZERO was estimated to be around 50~60% of the current RO system.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Atmosphere
• /
• v.32 no.1
• /
• pp.61-70
• /
• 2022

This study evaluates the economic values for the several first precipitation events during Changma period. The selected three years are 2015, 2019, and 2020, where average precipitation amounts across the 58 Korean stations are 12.8, 20.1 and 13.3 mm, respectively. The four categories are used to assess the values including air quality improvement, water resource acquisition/accumulation, drought mitigation, and forest fire prevention/recovery. Economic values for these three years are estimated 50~150 billion won. Among the four factors considered, the effect of air quality improvement is most highly valued, amounting to 70 to 90% of the total economic values. Wet decomposition of air pollution (PM₁₀, NO₂, CO, and SO₂) is the primary reason. The next valuable element is water resource acquisition, which is estimated 9~15 billion won. Effects of drought mitigation and fire prevention are deemed relatively small. This study is the first to estimate the value of the precipitation events during Changma onset. An analysis for more Changma years will be performed to achieve a more reliable estimate.