• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.131-143
• /
• 2018

Phosphorus (P) is a limited, essential, and irreplaceable nutrient for the biological activity of all the living organisms. Sewage sludge ash (SSA) is one of the most important secondary P resources due to its high P content. The SSA has been intensively investigated to recover P by wet chemicals (acid or alkali). Even though $H_2SO_4$ was mainly used to extract P because of its low cost and accessibility, the formation of $CaSO_4$ (gypsum) hinders its use. Heavy metals in the SSA also cause a significant problem in P recovery since fertilizer needs to meet government standards for human health. Therefore, P recovery process with selective heavy metal removal needs to be developed. In this paper some of the most advanced P recovery processes have been introduced and discussed their technical characteristics. The results showed that further research is needed to identify the chemical mechanisms of P transformation in the recovery process and to increase P recovery efficiency and the yields.

• Journal of Information Technology Services
• /
• v.15 no.1
• /
• pp.269-287
• /
• 2016

In general, service failure occurs inevitably and the customers who experienced the greater dissatisfaction have the higher expectations of service recovery. However, most of the previous studies have focused on the evaluation and risk factors of pre-service quality. Thus, this study is contrary to the numerous previous studies and focus on the effectiveness of mobile application advertisement users' perceived perception on service recovery after service fails. A research model presented in this study is based on the Equity Theory and deeply evaluated the effectiveness of Distributive Justice, Interactional Justice, and Authenticity Relevance on Service Recovery. The survey of this study was conducted among 286 users who have experienced a services recovery of mobile application advertising. As a result, among all the factors of users of mobile application advertising, Distributive Justice, Interactive Justice, and Relevance have a positive impact to Satisfaction. In addition, Distributive Justice, Authenticity and Satisfaction also have a positive impact to Trust. Ultimately, Satisfaction and Trust have a positive impact to Service Recovery. The results of this study are expected as a reference for presenting a new business model for mobile application advertising industry, reducing business risk and enriching the related researches.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.12
• /
• pp.875-880
• /
• 2012

The field of the large volume heat exchanger for wasted heat recovery ventilation system is being expanded enormously seeing as the fact that the quantity of reducing energies are huge due to the large volume heat exchanger for wasted heat recovery system at large buildings and factories, which consume large amount of energies while it has been arising huge amount of losses in Korea because of the lack of technology. To develop large volume waste heat recovery heat exchanger, rotor type heat exchanger was simulated for the surface corrugation. Based on the simulation results produced $30,000m^3/h$ grade waste heat recovery, heat exchanger was performed for the actual experiment. In addition, performance tests exceed the capacity of a large waste heat recovery heat exchanger performance test methods proposed.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1247-1264
• /
• 2021

Anabolic steroids are frequently used to increase the growth rate of meat-producing animals. Exposure to an anabolic-androgenic steroid, nandrolone decanoate (ND), is associated with expressional reduction of testicular steroidogenic enzymes. However, the effect of withdrawal of ND exposure on the expression of these testicular molecules has not been thoroughly explored. The current research investigated expression changes of testicular steroidogenic enzymes in rats at several recovery periods (2, 6, and 12 weeks) after the stop of ND treatment with different doses (2 and 10 mg/kg body weight) for 12 weeks. Body and testis weights were recorded, and transcript levels of molecules were determined by quantitative real-time polymerase chain reaction (PCR). The immunohistochemistry was used to examine the changes of immuno-intensities of molecules. At 6 and 12 weeks of the recovery period, the 10 mg/kg ND-treated rats were lighter than other experimental groups. The interstitial compartment vanished by ND treatment filled up as the recovery period became longer. The expression of steroidogenic acute regulatory protein was returned to the control level at 12 weeks of the recovery period. Expression levels of cytochrome P450 side-chain cleavage and 17a-hydroxylase were increased in 2 mg/kg ND-treated group at 6 weeks of the recovery period, and transcript levels of these molecules in 2 and 10 mg/kg ND-treated groups at 12 weeks of the recovery period were significantly lower than the control. Expression levels of 3β-hydroxysteroid dehydrogenase (HSD) type I and 17β-HSD type 3 in 2 mg/kg ND-treated group were comparable with those of control at 12 weeks of the recovery period, but not in 10 mg/kg ND-treated group. Expression of cytochrome P450 aromatase (Cyp19) was reverted to the control level at 2 weeks of the recovery period. Except for Cyp19, there was a visible increase of immuno-staining intensity of other testicular steroidogenic enzymes in the Leydig cells as the recovery period progressed. This research has demonstrated that the cease of ND administration could restore the expression of testicular steroidogenic enzymes close to the normal level. Nevertheless, a relatively long recovery period, compared to the ND-exposure period would be required to retrieve normal expression levels of testicular steroidogenic enzymes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.307-311
• /
• 2015

In this paper, we propose an efficient fault-recovery technique for CGRA (Coarse-Grained Reconfigurable Architecture) based multi-core architecture. The proposed technique is intra/inter-CGRA co-reconfiguration technique based on a ring-based sharing fabric (RSF) and it enables exploiting the inherent redundancy and reconfigurability of the multi-CGRA for fault-recovery. Experimental results show that the proposed approaches achieve up to 73% fault recoverability when compared with completely connected fabric (CCF).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1590-1597
• /
• 2000

This paper describes a CMOS data recovery circuit using oversampling technique. Digital oversampling is done using a delay locked loop circuit locked to multiple clock periods. The delay locked loop circuit generates the vernier delay resolution less than the gate delay of the delay chain. The transition and non-transition counting algorithm for 4x oversampling was implemented for data recovery and verified through FPGA. The chip has been fabricated with 0.6um CMOS technology and measured results are presented.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.685-687
• /
• 2024

Fiber optic cables are used extensively for remote monitoring in applications under extreme conditions, such as at high temperatures or in ionizing radiation fields. When high temperature fiber optic cables were subjected to gamma irradiations, there was a significant loss in transmission at wavelengths < 350 nm after only 1 minute of irradiation. Negligible recovery of the fiber optic transmission with time was observed over 2 years, but the irradiation damage was almost completely reversed by high temperature annealing at 400 ℃.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.337-350
• /
• 1990

A post-irradiation annealing study was conducted with use of reactor pressure vessel(RPV) steel A533B Cl.1 base metal irradiated to a dose of 4.84$\times$10$^{18}$ n/$\textrm{cm}^2$ at about 38$0^{\circ}C$. Microhardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurs in the temperature range of 280-3O5$^{\circ}C$, Michrohardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurrs in the temperature range of 280-305$^{\circ}C$. The variations of Ip, Iw and R parameters indicated that the formation of vacancy clusters by vacancy agglomeration and the annihilation of monovacancies are the first recovery process. The second recovery process occurs in the range of 405-49$0^{\circ}C$ and positron annihilation parameters measured indicated that the dissolution of carbon atoms decorated around vacancy-type defects and possible precipitates, and the annihilation of monovacancies give rise to the second recovery process. It was further indicated that radiation anneal hardening (RAH) in the range of 305-405$^{\circ}C$ between the temperature ranges for the two processes occurs due to the formation of carbon-decorated vacancy clusters and precipitates. The activation energies, orders of reaction and other characteristics of recovery processes were determined by the Meechan-Brinkman method. The activation energy for the first recovery process was determined as 1.76 eV and that for the second recovery process as 2.00eV. These values are lower than those obtained by other workers. This difference may be attributed to the lower copper content of the RPV steel used in the present study. The order of reaction for the first recovery process was determined as 1.78, while that for the second recovery process as 1.67 Non-integer orders of reaction for recovery processes seem to be attributed to the fact that several mechanisms for the first order and the second order of reaction are compounded in one process. This result also supports for the above conclusions from measurements of PA parameters.

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.221-221
• /
• 2006

The SMD type P-N junction diode with ceramic package for diode case were fabricated. It was made this diode with simple process from $Al_2O_3$ ceramic chip, solder preform, diode chip, coating reagent and conductive paste for chip terrmination. Its merit is small size, easy manufacture. fast cooling with ceramic case. The electric characteristics of the diode such as reverse recovery time, breakdown voltage, forward voltage, and leakage current were 5 28ns, 1322V, 1.08V, $0.45{\mu}A$.