• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.347-353
• /
• 2007

Fleshing scrap is a kind of wastes produced during leather making process and used in the test of manufacturing biodiesel. The early step of manufacturing biodiesel is fat recovery from fleshing scrap. Hence, we investigated the influence of the way of fat recovery on the fatty acid composition. We used three different recovery ways, that is chemical method by protein decomposition with acid/fat recovering, physical method by protein denaturalization with heat and vacuum/fat pressing, and biodiesel method by protein decomposition/fat recovering. The biological method yielded the best results in terms of appearance transparency. It was most effective to lower acid value. Also the recovered fat by biological method would be favorable methyl-ester reaction raw material for biodiesel because it contains more than 5% of oleic acid among unsaturated fatty acid.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1330-1340
• /
• 2000

Multimedia isn ow applied to various real world areas. In particular, the focus on multimedia system and CSCW(Computer Supported Cooperative Work) has increased. In spite of this current trend, however, the study of fault tolerance for CSCW has not yet fully progressed. We propose EDR_MSCW. It is a system that is suitable for detecting ad recovering software error based on multimedia computer supported cooperative work as DOORAE by using software techniques. DOORAE is a framwork for supporting development on multimedia applications for computer-based collaborative works. When an error occurs, EDR_MCSCW detects an error by using hooking methods in MS-Windows API(Application Program Interface) function. If an error is found, we present a checkpointing and recovery algorithm which has the removal function of the domino-effect for recovering multimedia and CSCW by using stack.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.31-37
• /
• 1997

The Mg-ferrite powders were recovered from acid leaching Mg waste by hydrothermal method. Recovering conditions ofMg-Ferrite were investigated m this system and the powders prepared were characterized, using X-ray analysis, chemicalanalysis, SEM. TEM, and VSM. In this study, pH of solution and the kind of neutralizer wcre important factors on thecharacteristics of the product. The optimum condition of recovering MgPenite was the mole ratio of Fe" : Mg"=2'1, reactiontemperature : ZOWC, reaction time.lhr, at pH=lZ, and Oi partial pressure af 2000 psi. And the powders ~ccovered have amonodispersed and spherelike shapes with the narrow sue distribulion.ow sue distribulion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1880-1888
• /
• 2001

In wireless communication systems, transmission errors degrade the reconstructed image quality severely. Among various techniques which reduce the degradation, the error concealment technique yields good performance without overheads and the modification of the encoder. In this paper, we have proposed the technique for recovering the corrupted motion vector using the edge direction of blocks which surround the corrupted block, when the video information is compressed by H.263 standard. We uses the property that each object in video sequences shows the same motion. For the estimation of edge directions, the first AC coefficients of blocks are used. Extensive simulation results show that the proposed technique yields good performance with a reduced computational complexity.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.199-204
• /
• 2006

The kernel hardening function is necessary in terms of kernel stability to reduce the system error or panic due to the kernel code error that is made by program developer. But, the traditional kernel hardening method is difficult to implement and consuming high cost. The suggested kernel hardening function that makes high availability system by changing the panic() function of inside kernel code guarantees normal system operation by recovering the incorrect address of the kernel stack frame. We experimented the kernel hardening function at the network module of the Linux by forcing panic code and confirmed the proposed design mechanism of kernel hardening is working well by this experiment.

• Smart Structures and Systems
• /
• v.24 no.2
• /
• pp.157-171
• /
• 2019

This study investigated the effects of the geometric parameters of superelastic shape memory alloy (SE SMA) fibers on the pullout displacement recovering and self-healing capacity of reinforced cementitious composites. Three diameters of 0.5, 0.7 and 1.0 mm and two different crimped lengths of 5.0 and 10.0 mm were considered. To provide best anchoring action and high bond between fiber and cement mortar, the fibers were crimped at the end to create spear-head shape. The single fiber cement-based specimens were manufactured with the cement mortar of a compressive strength of 84 MPa with the square shape at the top and a dog-bone shape at the bottom. The embedded length of each fiber was 15 mm. The pullout test was performed with displacement control to obtain monotonic or hysteretic behaviors. The results showed that pullout displacements were recovered after fibers slipped and stuck in the specimen. The specimens with fiber of larger diameter showed better displacement recovering capacity. The flag-shaped behavior was observed for all specimens, and those with fiber of 1.0 mm diameter showed the clearest one. It was observed that the length of fiber anchorage did not have a significant effect on the displacement recovery, pullout resistance and self-healing capacity.

• Journal of Korea Multimedia Society
• /
• v.24 no.3
• /
• pp.431-439
• /
• 2021

Since the sensor nodes are randomly arranged in the region of interest, it may happen that the sensor network area is separated or there is no sensor node in some area. In addition, after the sensor nodes are deployed in the sensor network, a coverage hole may occur due to the exhaustion of energy or physical destruction of the sensor nodes. The coverage hole can greatly affect the overall performance of the sensor network, such as reducing the data reliability of the sensor network, changing the network topology, disconnecting the data link, and worsening the transmission load. Therefore, sensor network coverage hole recovery has been studied. Existing coverage hole recovery studies present very complex geometric methods and procedures in the two-step process of finding a coverage hole and recovering a coverage hole. This study proposes a method for discovering and recovering a coverage hole in a sensor network, discovering that the sensor node is a boundary node by itself, and determining the location of a mobile node to be added. The proposed method is expected to have better efficiency in terms of complexity and message transmission compared to previous methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.574-575
• /
• 2021

Re-manufacturing is the process of recovering the function and performance of the original product through a re-assembly process such as a new product assembly process after reprocessing by recovering used products or parts that are in the disposal stage at the end of their lifespan. One of the manufacturing methods. The remanufacturing industry is important not only in terms of environmental protection, but also in terms of economics. The success or failure of the industry as a whole depends on trust in products and price competitiveness. Image processing systems are used to reduce labor costs and improve product reliability in the product manufacturing process. In this study, foreign substances and defects that are difficult to identify with the human eye are detected by using the pre-processing step of determining whether to recycle the drum and image processing immediately before shipment after regenerating the drum to regenerate the waste drum.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.2
• /
• pp.77-86
• /
• 1996

In this paper we deal with the problem of recovering 3-D motion and structure from a time-varying 2-D velocity vector field. A great deal has been done on this topic, most of which has concentrated on finding necessary and sufficient conditions for there to be a unique 3-D solution corresponding to a given 2-D motion. While previous work provides useful theoretical insight, in most situations the known algorithms have turned out to be too sensitive to be of much practical use. It appears that any robust algorithm must improve the 3-D solutions over time. As a step toward such algorithm, we present a method for recovering 3-D motion and structure from a given time-varying 2-D velocity vector field. The surface of the object in the scene is assumed to be locally planar. It is also assumed that 3-D velocity vectors are piecewise constant over three consecutive frames (or two snapshots of flow field). Our formulation relates 3-D motion and object geometry with the optical flow vector as well as its spatial and temporal derivatives. The linearization parameters, or equivalently, the first-order flow approximation (in space and time) is sufficient to recover rigid body motion and local surface structure from the local instantaneous flow field. We also demonstrate, through a sensitivity analysis carried out for synthetic and natural motions in space, that 3-D motion can be recovered reliably.