• Journal of Oriental Physiology
• /
• v.14 no.2 s.20
• /
• pp.189-198
• /
• 1999

Aminoglycosides, including gentamicin, have been used as antibiotics for the various infections by gram-negative bacteria. However, there are some restrictions for using these drugs. Gentamicin, a typical aminoglycoside, has the side effect of nephrotoxicity, including polyuria, glycosuria, proteinuria, glomerulonephritis, and uremia. The aims of this study were to examine the prevention or reduction effects of Jinmootang on the gentamicin-induced nephrotoxicity and to investigate the possible mechanisms on the effect of Jinmootang. The subcutaneous injections of 60mg of gentamicin per kg of boby weight to Sprague-Dawley rats for 8 days induced typical symptoms of nephrotoxicity by aminoglycosides. 0.6ml of water extract Jinmootang (100ml/chup) was orally treated in the experimental animal. 24-hour urine was collected with the metabolic cage and plasma was sampled from the abdominal aorta. The plasma concentration of sodium was significantly decreased by the treatment of gentamicin but it was not-significantly changed by the treatment of Jinmootang to the animal. The concentration of potassium was greatly decreased in the gentamicin-treated animals. However. it was returned to the normal level in the Jinmootang-treated animals. The concentrations of creatinine and urea were increased by gentamicin treatment. But, Jinmootang reduced these concentrations. Nevertheless, the osmolalities of plasma in both group were not different from each other. Even though the plasma concentration of aldosterone was not significantly changed, the mean value was increased by the gentamicin intoxication. The concentration of aldosterone was decreased by the treatment of Jinmootang. The reduction of aldosterone level in plasma could be a factor to improve the hypokalemia. The fractional excretion of potassium was much higher than normal by the treatment of gentamicin and it was decreased by 50% in the Jinmootang-treated rats. Therefore, the reabsorption of potassium was significantly increased by the treatment of Jinmootang, even though the filtered load of potassium in the experimental group was much highter than control. Even though the concentration of plasma aldosterone was decreased by the treatment of Jinmootang, the fractional excretion of sodium was not increased, slightly lower. These data suggested that Na reabsorption was increased in the proximal tubule by Jinmootang. The filtered load of glucose in the Jinmootang-treated group was greater than in control. Nevertheless, the fractional excretion of glucose in the experimental group was not different from that in control. These results indicate that glucose reabsorption was increase in the proximal tubule by Jinmootang treatment. The results of this study suggest that Jinmootang could improve the some nephrotoxic symptoms induced by gentramicin treatment. Hypokalemia, the reduced glomerular filtration rate, and dysfunctions of renal proximal tubule and distal nephron were significantly recovered to normal level. The increase of glomerular filtration rate by Jinmootang might contribute to eliminate the waste product, including creatinine and urea, and/or gentamicin through the kidney.

• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.616-623
• /
• 2003

Waxy barley brans were collected during the pearling process. The extraction of $\beta$-glucan from barley bran was effected by the extraction conditions. The $\beta$-glucan content increased with temperature, but not with pH. The highest yield, 6.5%, was achieved at pH 7.0 and 55$^{\circ}C$. At pH 10 and 45$^{\circ}C$, 48.5% of the $\beta$-glucan in barley bran was recovered in the gum product, with 54.6% purity. The protein and starch contaminations were high, reaching 13.6 and 23.7%, respectively. The $\beta$-glucan content was greatest in the subaleurone and aleurone regions (bran fractions 1, 2, 3 and 4), and declined considerably toward the inner layers. A monosaccharide analysis of the purified, $\beta$-glucan, from bran fractions 1, 2, 3 and 4, indicated that glucose constituted the majority of the gum. The small amounts of the arabinose and xylose found in the gum may indicate the presence of arabinoxylans as minor constituents. The molecular weights of the $\beta$-glucans isolated from bran fractions 1,2 and 3 were found to be 4.09${\times}$10$^{5}$ ∼-4.41${\times}$10$^{5}$ . The major glycosidic linkages of the $\beta$-glucans demonstrated the presence of 2, 4, 6-Me-Glc and 2, 3, 6-Me-Glc. When flow behaviors of barley bran $\beta$-glucan were examined, $\beta$-glucan exhibited pseudoplastic fluid properties.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.3-14
• /
• 2020

This study aims to introduce and review on the recovery technologies of rare earth elements(REEs) from coal ash. Many researchers have been carried out by various beneficiation processes, such as particle size separation, magnetic separation, specific gravity, and flotation to recover rare earth elements from coal ash generated from Pulverized Coal(PC) boiler. Through the beneficiation process, it was confirmed that concentration of rare earth elements was much lower than the 4,700 ppm, and that additional enrichment treatment through wet process was needed for the products recovered after the beneficiation process. It was confirmed that the rare earth elements contained in coal ash were applied to the leaching process after pretreatment such as alkali-fusion to improve leaching efficiency. Although beneficiation and leaching methods have been studied, its optimum recovery technologies for rare earth elements not been confirmed up to now, research on the recovery of rare earth contained in coal ash is reported to continue. In case of Korea, the technology for the recovery of rare earth elements from coal ash and coal by-product could not been confirmed up to present. In these reasons, it is urgent to develop technologies such as beneficiation and leaching process continuously.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.404-412
• /
• 2020

Herein, the properties and self-healing performance of cement mortar incorporating calcium sulfoaluminate(CSA), crystalline admixture(CA), and magnesium oxide(MgO) were investigated. Mortar strength test and water permeability experiments were conducted to analyze self-healing performance of the mortar. Also, variation in crack width were measured via digital optical microscope observation. The hydration products formed in the crack via self-healing were analyzed using x-ray diffraction(XRD), thermogravimetry(TG), and digital optical microscope. The analysis revealed that compressive strength and tensile strength increased as CA substitutional ratio increased. However, in the case of MgO replacement, the compressive strength and tensile strength decreased as the CA substitution ratio increased. The products in the recovered cracks are found to be mostly Ca(OH)2, MgCO3, and CaCO3. CaCO3 was shown to be the main healing product and had a higher portion than Ca(OH)2 and MgCO3 in the recovery products. Moreover, the optimal mix derived via water permeability and crack width results was 8% CSA + 1% CA + 2.5% MgO.

• Journal of Naturopathy
• /
• v.9 no.2
• /
• pp.71-78
• /
• 2020

Purpose: This study was to present home-care cases of gangrene sores or prevalent diseases using fake energy salt (FES) water containing energy. Methods: The health functional foods used for disease management were FES Water. Each product was Myeongil Leaf powder, dried yeast, propolis, fermented organic calcium, and royal jelly. Changes were investigated after taking this food. Some of them were combined with hospital treatment, and most of them were experienced by patients at home while managing the affected area. Results: One patient with high fever swine flu, who was treated in a hospital, had a fever dropping to the normal range in 2 hours, and one patient with a leg fracture healed in about six weeks, and one patient had bone adhesion in 2 weeks. Patients with rhinitis recovered after taking FES, and the intraocular pressure of patients with damaged retinopathy fell from 40 mmHg to 20 mmHg after taking FES. One patient with postpartum sequelae was said to have improved their aching limbs four days, and a Covid-19 confirmed patient admitted to the hospital was discharged ten days after starting taking FES during treatment. The size of the gangrene sores in 19 subjects initially ranged from 1 to 7 cm. Most of them were alleviated or healed by continuing to manage them at home with health functional food intake and FES for two weeks to a year. Conclusions: The above results are personal experiences and health functions, such as fake energy salts. It was possible to recognize that food was helpful for health promotion, but no final medical diagnosis was made.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.3-11
• /
• 2022

Owing to the global development of high-strength alloys and renewable energy industries, the demand for vanadium, a key raw material in these industries, is expected to increase. Until now, vanadium has been recovered as a by-product of the industry, but interest in its direct recovery from minerals has increasing with its significantly increasing demand. In particular, the recovery of vanadium from stone coal ore and vanadium titano-magnetite (VTM) containing vanadium has been actively researched in China, which has the largest reserves and production of vanadium in the world. In Korea, a large amount of VTM also occurs in the northern part of Gyeonggi-do, and fundamental research and technical development is being conducted to recover vanadium. It is necessary to understand the current status of the separation technology used worldwide to satisfy the demand for metals such as vanadium, which currently depends on imports.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.44-63
• /
• 2000

Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.269-295
• /
• 1995

This research is concerned with the social division of labor within the traditional industry district: Damyang bamboo ware industry district and Yeoju pottery industry district in South Korea, Damyang bamboo ware and Yeoju pottery are well known of the Korean traditional industry. The social division of labor in an industry district is considered as an important factor. The social division of labor helps the traditional industry to survive today. This summary shows five significant points from the major findings. First, Damyang bamoo ware industry and Yoeju pottery industry have experienced the growth stages until 1945, the stagnation in the 1960s, and the business recovery in the 1980s. Most Korean traditional industries had been radically declined under the Japanese colonization; while, Damyang bamboo ware industry and Yeoju pottery industry district have been developed during above all stages. The extended market to Japan helped the local government to establish a training center, and to provide financial aids and technical aids to crafts men. During the 1960s and 1970s, mass production of substitute goods on factory system resulted in the decrease of demand of bamboo ware and pettery. During the 1980s, these industries have slowly recovered as a result of the increased income per capita. The high rate of economic growth in the 1960s and 1970s was playing an important role in the emerging the incleased demand of the bamboo ware and pottery. Second the production-and-marketing system in a traditional industry district became diversified to adjust the demand of products. In Damyang bamboo ware industry district, the level of social division of labor was low until the high economic development period. Bamboo ware were made by a farmer in a small domestic system, The bamboo goods were mainly sold in the periodic market of bamboo ware in Damyang. In the recession period in the 1960s and 1970s, the production-and-marketing system were diversified; a manufacturing-wholesale type business and small-factory type business became established; and the wholesale business and the export traders in the district appeared. In the recovery period in the 1980s, the production-and-marketing systems were more diversified; a small-factory type business started to depend On subcontractors for a part of process of production; and a wholesale business in the district engaged in production of bamboo ware. In Yeoju pottery industry district, the social division of labor was limited until the early 1970s. A pottery was made by a crafts man in a small-business of domestic system and sold by a middle man out of Yeoju. Since the late 1970s, production-and-marketing system become being diversified as a result of the increased demand in Japan and South Korea. In the 1970s, Korean traditional craft pottery was highiy demanded in Japan. The demand encouraged people in Yoeju to become craftsmen and/or to work in the pottery related occupation. In South Korea, the rapid economic growth resulted in incline to pottery due to the development of stainless and plastic bowls and dishes. The production facilities were modernized to provide pottery at the reasonable price. A small-busineas of domestic system was transformed into a small-factory type business. The social division of labor was intensified in the pottery production-and-maketing system. The manufacturing kaoline began to be seperated from the production process of pottery. Within the district, a pottery wholesale business and a retail business started to be established in the 1980s. Third the traditional industry district was divided into "completed one" and "not-completed one" according to whether or not the district firms led the function of the social division of labor. The Damyang bamboo ware industry district is "completed one": the firm within the district is in charge of the supply of raw material, the production and the marketing. In the Damyang bamboo ware district, the social division of labor w and reorganized labor system to improve the external economics effect through intensifying the social division of labor. Lastly, the social division of labor was playing an important role in the development of traditional industry districts. The subdivision of production process and the diversification of business reduced the production cost and overcame the labor shortage through hiring low-waged workers such as family members, the old people and housewives. An enterpriser with small amount of capital easily joined into the business. The risk from business recession were dispersed. The accumulated know-how in the production and maketing provided flexiblility to produce various goods and to extend the life-cycly of a product.d the life-cycly of a product.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.1
• /
• pp.40-50
• /
• 1990

The purpose of this paper is to develop a colorant from krill, Euphausia superba, process wastes for use in food products. Carotenoproteins were extracted from preboiled krill processing offal(PKPO) and raw frozen krill processing offal(RKPO) with the aid of proteolytic enzymes. The long-term stability of the astaxanthin associated with the carotenoprotein by the addition of pretense inhibitor and antioxidant to the product were also investigated. Total astaxanthin contents of PKPO and RKPO were $35.1mg\%,\;22.1mg\%$ and those in carotenoproteins were $98.6mg\%,\;61.9mg\%$, respectively. The chitin contents of PKPO and RKPO were $6.9\%,\;4.5\%$, however, those of carotenoproteins were not determined. When $0.5\%$ trypsin was added to the extraction medium containing 0.5M $Na_3EDTA$ at $4^{\circ}C,\;74\%$ of astaxanthin and $83\%$ of the protein of PKPO were recovered as carotenoprotein in 24hrs. The amino acid profile in carotenoprotein was mainly composed of glutamic acid, methionine, aspartic acid and isoleurine. Their contents amounted to about 40% of the total amino acids, followed by alanine, phenylalanine, Iysine, leucine, threonine and tyrosine in that order, with a small amount of cysteine and tryptophan. The levels of essential amino acids were high as much as $38.3\%\~43.6\%$ of the total amino acids. The maximum observance of the carotenoid fraction from krill processing offal and from carotenoprotein was 469nm in petroleum ether. The separated components of carotenoprotein by TLC had Rfs $0.20\~0.23\;0.56\~0.60$ and $0.88\~0.91$. The carotenoids were comprised of astaxanthin, astaxanthin monoester and asthaxanthin diester in $25\~30\%\;,35\~40\%$and $40\~45\%$, respectively. The loss of carotenoids in the carotenoprotein can be prevented by the addition of pro-tease inhibitor(trasylol) and antioxidant(BHT) below $4^{\circ}C$.