• Korean Journal of Remote Sensing
• /
• v.18 no.3
• /
• pp.147-153
• /
• 2002

The real-time reception and recording of down-link mission data from a satellite requires the highest reliability because the data lost in receiving process cannot be recovered. The data receiving and recording system has moved from a set of dedicated hardware and software components to commercial-off-the-shelf (COTS) components in order to reduce the system cost as well as to upgrade the system easily for handling other satellite data. The use of COTS hardware and middleware components prevents the system developer from correcting or modifying the internal operations of the COTS components, and hence, instant performance degradation of the COTS components which affects the reliable data acquisition must be covered by a software algorithm. This paper introduces the instant performance problem of a COTS data recording device which leads to the data loss in the real-time data reception and recording process. As a result, the requirement of the modification of the conventional data read/write technique is issued. In order to overcome the data loss problem due to the use of COTS components and the conventional software technique, a new algorithm called a software buffering technique is proposed. The experiments show that the application of the proposed technique results in reliable real-time reception and recording of high speed serial data.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.151-155
• /
• 1993

Evoked potentials(EP) measured with scalp electrodes are often described as a deterministic process corrupted by uncorrelated electrical activities occuring in the brain and These electrical activities(ongoing EEG) refer to noise in EP recording. The Conventional method to determine the EP waveform requires long recording time. Unfortunately most of algorithm developed are too complicated for implementation in real time. Thus, conner EP recording devices use Ensemble average for real time processing. In this paper introduce EP recording hardware for processing advanced algorithm in real tlne. This hardware is composed of DSP chip(TMS320c25) and microcomputer.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.74-78
• /
• 1991

The method for analyzing the recording and reading process of magnetic recording system by numerical simulation is introduced. which can simulate the effect of elements of the magnetic recording system. During the whole simulation, hysteresis characteristics must be included. Preisach model and finite element method are used to construct the algorithm. From the wave of recording current, recorded pattern of magnetization in recording media is simulated in recording process, and then waveform of reading signal in head coil is obtained in reading process. To show the validity of this method, this is applied to perpendicular magnetic recording system. Waveform of recording signal and reproduced signal is obtained in several density. Pattern of reprocuced voltage magnitude according to increase of recording density shows roll-off curve.

• Journal of Korea Multimedia Society
• /
• v.15 no.10
• /
• pp.1185-1195
• /
• 2012

In the general recording method of mobile broadcasting, all incoming broadcasting streams after recording time will be saved regardless of its content. In this case, as such that viewers do not want to record, commercial advertisement, are saved together. In order to solve these problems, the proposed method checks if the contents such as advertisements are exist in the target stream by analysing the splicing in incoming MPEG-2 TS streams and, if splicing happened, excludes incoming stream after the splicing in the recording process. In the proposed method, first the splice in the recording stream is verified using the related flags of adaptation field in the TS packet and, if judged to cause a splice, the time of splicing is to be estimated by evaluating the value of splice_countdown filed. In this way, the proposed algorithm provides the seamless recording method by estimating the time of splice and excluding the contents after the splicing. To evaluate the proposed seamless recording method, the simulation was carried out by modifying the software of the existing mobile broadcasting terminal.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2015

The ECG(Electrocardiograph) ambulatory test as called Holter is performed usually to diagnose several heart diseases causing different arrhythmias. This paper exposes the insights of the design of a 10-lead ambulatory ECG recorder. Reducing the size and minimizing the power consumption of the ECG recorder are crucial to allow long recording time without causing discomfort to the patient. This paper proposes lower hardware design and differential compression algorithm to extend the maximum 72 hours recording time in consideration of smaller and light-weighted recorder size. The performance results by newly introduced compression algorithm are shown and discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.539-546
• /
• 2007

Information storage devices using disks have a disk vibration at the frequency which is equivalent to the disk rotational speed. They also have a track vibration due to the disk eccentricity at the same frequency. In near field recording systems, the former affects the air-gap servo and the latter affects the tracking servo. In this paper, we introduce a novel control algorithm based on the internal model principle to both servos. A controller block designed by the principle is connected to the base lead-lag type compensator in parallel in order to cancel the repeatable run-out due to the disk vibration or eccentricity. Simulation and practical application of the algorithm on a near field recording system show good servo performance.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.50-55
• /
• 1992

Numerical method for analyzing the reading process in magnetic recording system is described. Hysteresis characteristics must be included in numerical analysis not only recording process but also reading process because of hysteretic behavior of recording media. Algorithm which is consisted of finite clement method for numerical analysis and Preisach model considered to be more appropriate method than Stoner-Wohlfarth model with spin curling mode for describing hysteresis characteristics is constructed. Equations to calculate waveform of reproduced voltage is proposed. Then, this is applied to perpendicular magnetic recording systems with pole type head and double layer media. Waveform of magnetic flux density and reproduced voltage induced in head coil is obtained. If the recording current increase in recording process, magnitude of reproduced voltage in reproducing process saturates. From this saturation curve, value of current which produce maximum voltage can be obtained.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.3
• /
• pp.243-250
• /
• 2004

We describe a practical implementation of DVR (Digital Video Recording) system. And we propose a new image compression algorithm, that input video signal is divided into two parts, a moving target and a non-moving background part to achieve efficient compression of image sequences. This algorithm reorganizes a target area and a back-ground area by use of Macro Block(MB) unit on encoding scheme. The proposed algorithm allows high quality image reconstruction at low bit rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2439-2450
• /
• 1997

As recording densities increase in digital magnetic recording channels, the performances of digital detection techniques such as PRML and DFE degrade significantly due to nonlinear distortion in recording channels. The primary impediments for hgih-density recording are generally classified as nonlinear transition shift, which can be reduced substantially by the precompensation technique, and partial erasure which usually requires sophisticated nonlinear equalization techniques. In order to acheieve the highest density recording, accurate estimation of the parameters associated with these two noninear distortions is crucial. In this paper, a new estimation technique to distinguish these two different nonlinear effect using a proposed adaptive algorithm in time domain is presented. The effectiveness of the proposed adaptive approach to identify uniquely the nonlinear parameter with bias is demonstrated by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4C
• /
• pp.299-304
• /
• 2008

For perpendicular magnetic recording channels, it is hard to expect improving the performance by using the PRML or NPML. Hence, we exploit LDPC code to improve the performance. In this paper, we examine a single message-passing detector/decoder matched to the combination of a perpendicular magnetic recording channel detector and an LDPC code decoder. We examine the performance of channel iteration with joint LDPC code on perpendicular magnetic recording channel, and simplify the complexity of the message-passing detector algorithm.