• 제목/요약/키워드: Record length

검색결과 366건 처리시간 0.025초

황색실크 생산용 특수누에 품종 '골든실크' 육성 (Breeding of New Silkworm Variety Golden silk, a Yellow Cocoon Color for Spring Rearing Season)

  • 강필돈;이상욱;정이연;손봉희;김용순;김기영;김미자;홍인표;이광길;박광영
    • 한국잠사곤충학회지
    • /
    • 제49권1호
    • /
    • pp.14-17
    • /
    • 2007
  • 다수성 품종으로 육성된 골든실크는 새로운 봄누에 특수용도 품종으로서 육성경위와 주요특성을 하면 다음과 같다. 1. 일본종계 원종 잠311은(견색적$\times$흑아)$\times$잠125 교잡 육성한 무늬 품종으로 황색고치를 짓고, 중국종계 원종 잠312는 잠304$\times$괴축과 교잡 육성한 무늬 없는 누에품종으로 황색고치를 짓는 품종이다. 2. 2006년 춘잠기 지역적응시험 결과는 골든실크의 주요특성은 - 실용 부화비율은 97%, 화용비율 및 상견비율은 대조품종보다 우수하였다. 수량성 등 다른 조사항목에서는 대조보다 좋지 못하였으나, 전령기간은 1일 12시간이 짧아 사육노동력을 줄일 수 있는 이점이 있다. - 견사장은 1,031m였고, 견사섬도는 2.97 데니어 이었다. - DNJ 함량은 대조 춘수잠 3.81 mg보다 14% 높은 4.34mg으로 우수 하였고, 동충하초 생산력 검정에서는 동충하초 생체중이 1개당 대조 1.41g보다 낮은 1.20g이였다. 3. 잠종생산능력에 있어서는 일본종계 원종 잠311의 나방당 산란수는 604개로 대조보다 많았고, 최청에서 발아까지의 일수는 54일 이었다. 중국종계 원종 잠312의 산란수는 493개로 일반장려품종의 원종과 산란성이 비슷하였고, 최청에서 발아까지의 일수는 52일이었다.

'파산서당'의 영건과정과 조경식물 변화상 탐색 (The Search for Study on the Construction Process and Changes in the Landscape Plants of the Pasanseodang)

  • 주빈;최하영;신상섭
    • 헤리티지:역사와 과학
    • /
    • 제51권1호
    • /
    • pp.48-65
    • /
    • 2018
  • 1874년 박규현이 기술한 '파산서당기'를 중심으로 분석한 파산서당의 영건과정과 조경식물의 변화상을 추적한 연구결과는 다음과 같다. 첫째, 대구 달성의 하빈면 묘리 파회에 자리한 살림집 삼가헌과 별당(파산서당)은 사육신 박팽년(1417~1456)의 11대손 박성수로부터 14대손 박규현에 이르기 까지 약 90년간(1783~1874)에 걸쳐 완성되었는데, 풍수적 회룡고미형(回龍顧尾形)으로 회자되는 길처이다. 둘째, 파회마을은 박성수가 1769년(영조 45)에 벗들과 교우하기 위해 초가를 짓고 자신의 호(삼가헌(三可軒))를 당호로 삼은 것으로부터 유래하는데, 둘째아들 박광석이 분가(1783)한 후 사랑채(1826)와 안채(1869)를 지었고, 박광석의 손자 박규현이 1874년에 연을 심어 가꾼 연못과 정자(하엽정)를 추가했으며, 파산서당 명칭은 삼가헌 뒷동산 지명과 연계된다. 셋째, 네모꼴 연못은 길이 21m, 너비 15m 규모로 연꽃을 심었는데, 못 가운데 원형 섬을 두어 조선시대의 보편적인 성리학적 세계관을 반영하고 있다. 파산서당에 부가된 정자(하엽정)의 명칭, 동쪽 방 이연헌(怡燕軒), 서쪽 방 몽양재(蒙養齋) 등은 군자적 삶의 염원, 그리고 자손들의 밝은 미래를 염원하는 뜻을 담았다. 넷째, 성리학적 규범(소나무, 연꽃, 대나무), 안빈낙도의 생활철학(버드나무), 은일사상과 태평성대의 염원(대나무), 그리고 구휼목적과 실용성(밤나무, 상수리나무, 가래나무, 옻나무 등)에 비중을 둔 식재수종의 반영을 추적할 수 있는데, 이는 서당이라고 하는 장소성과 상징성, 절제미학 등을 고려한 조경법이라 하겠다. 다섯째, 조영초기 식재수종은 회화나무와 연꽃을 제외하고 대부분 고사하여 다른 수종으로 대체되었는데, 서당 기능의 상실과 풍수적 가치(홍동백서 상징수종), 벽사기능(엄나무와 탱자나무), 심미성 및 실용적 가치(해당화, 매화, 배나무, 복숭아나무, 굴참나무), 가문의 번영과 변화지 않는 청백의 삶(자귀나무, 배롱나무, 주목), 심미관 등 후손들의 확장된 작정관을 보여주는 사례이다.

조선왕릉 연지(蓮池)의 특성과 전형 (A Study on the Characteristics and Model of Lotus Pond in Joseon Royal Tombs)

  • 고승관;구본학;최종희
    • 한국전통조경학회지
    • /
    • 제29권3호
    • /
    • pp.116-123
    • /
    • 2011
  • 본 연구는 조선왕릉 연지보존 및 복원을 위한 기초연구로 고문헌(춘관통고, 광릉지)에 그 기록이 남아 있으며, 비교적 원형이 잘 보존된 남양주 광릉, 효릉, 김포 장릉, 숭릉의 연지를 대상으로 형태, 재료, 구조 및 공법, 식생적 특성 및 전형에 관하여 살펴보았다. 조선왕릉 연지형태는 평면적으로는 방지원도형 혹은 방지형이며, 크기는 가로 7.5~81m, 세로 6.5~45m, 섬의 직경은 8~16m, 수심은 0.5~1.2m, 단면은 연지의 밑 부분은 좁고 윗부분으로 갈수록 넓은 형태로 조성되었다. 연지바닥은 진흙이 쓰인 것으로 볼 때 흙이 주재료이며, 연지의 구조 및 공법은 토축으로 들여쌓은 지안이 전형으로 보이며, 물의 입수와 배수는 암거수로를 통해 이루어졌다. 연지식생은 현재 많은 수종이 재식되어 있으나, 문헌과 현황을 비교해 보았을 때, 연지 내부는 연꽃, 연지 주변은 소나무 전나무 기타 화훼류 그리고 섬 안은 소나무가 재식되었음을 파악할 수 있었다. 한편, 궁궐 연지를 비교한 결과, 형태와 식생적인 측면에서는 큰 차이가 없었으나, 장대석이라는 재료의 차이에 따라 그 구조 및 공법에도 차이가 있음을 파악할 수 있었다. 이에 본 연구에서는 조선왕릉 연지의 특성을 분석하고 전형을 구명함으로써, 향후 조선왕릉 연지를 재현하는데 기본적 준거를 제공하였다는 긍정적 측면이 있다.

서·남해안 출수 닻돌 분석 (An analysis of anchor stones on the west and south coasts)

  • 박승민
    • 헤리티지:역사와 과학
    • /
    • 제55권4호
    • /
    • pp.6-22
    • /
    • 2022
  • 본고에서는 서·남해안에서 출수된 닻돌 228점의 유형을 분류하고, 유형별 결합 방식 상정, 출수 위치를 통한 항로 및 묘박지 추정 등을 시도하였다. 유형 분류에 앞서 닻돌의 무게, 두께, 너비, 길이를 측정하였는데, 묘박(錨泊)에서 가장 큰 영향을 끼치는 무게를 I~V군으로, 닻돌의 형태는 1~6형으로 구분하였다. 이러한 무게와 형태의 상관 관계를 통해 모두 17개의 유형으로 분류하였다. 유형별 결합 방식은 출수된 닻돌의 기준값 형태적 특징에 따라 무게가 180kg 이하이면서, 형태가 1·2형인 것은 닻장에 결합하여 사용하는 닻으로, 무게가 180kg 이상이며 형태가 3~6형인 것은 닻채에 결합하여 사용하는 닻으로 상정하였다. 이와 함께 과거 기록과 지역 주민의 증언을 통해 항로와 묘박지(錨泊地)를 파악하고 이를 실물자료와 대조하였다. 항로는 대체로 과거 기록과 그 위치가 일치했지만, 새로운 항로가 섬 인근이나 내륙 인접 해역에서 확인되기도 하였다. 묘박지의 경우 닻돌 집중 분포지인 태안 마도 해역과 진도 벽파진 해역(珍島 碧波津 海域)에서 소형, 대형 닻돌들이 출수되는 양상을 볼 때, 여러 크기의 선박이 두 해역에 묘박하였다는 증언과 일치하였다.

단위유량도와 비수갑문 단면 및 방조제 축조곡선 결정을 위한 조속계산 (Calculation of Unit Hydrograph from Discharge Curve, Determination of Sluice Dimension and Tidal Computation for Determination of the Closure curve)

  • 최귀열
    • 한국농공학회지
    • /
    • 제7권1호
    • /
    • pp.861-876
    • /
    • 1965
  • During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

  • PDF

시조의 변이 양상 (The Aspects of Change of Sijo)

  • 강명혜
    • 한국시조학회지:시조학논총
    • /
    • 제24집
    • /
    • pp.5-46
    • /
    • 2006
  • 시조는 발생초기부터 당대의 역사 시대적 배경에 따라 그 틀과 내용이 조금씩 변하면서 융통성 있고 유연하게 적응해 왔다. 이런 점이 당대의 시대적 배경이나 사상, 실태 등을 반영해서 당시의 독자들의 공감대를 이끌어낼 수 있었으며, 그러면서도 시조를 시조답게 하는 시조성만은 그대로 고수해 왔기에 '시조'라는 장르가 현재까지도 생존할 수 있었다. 어느 시대나 어떤 배경에서나 어떤 상황에서도 3장이라는 정형성은 지켜졌으며, 3, 3조나 3, 4조를 유지했고, 또 종장의 첫 구 3자도 고수했다. 이러한 시조성은 시대적인 간극에도 불구하고 '시조'라는 공분모 안에 모두 수렴시킬 수 있는 동인을 마련했다. 한국시가에 있어서 시조는, 공적 기능에서 사적 기능으로 변모가 이루어진 최초의 양식으로서. 그 변이과정을 살펴본 결과. 고려말${\sim}$조선조의 평시조는 그 당시 조류에 부합해서 시조 텍스트를 재도지기(載道之器)로 보아 이중적인 의미의 채색, 상징성 부여, 다채로운 문장 수식 등은 나타나지 않지만, 명천도(明天道) 정인륜(正人倫) 지향하는 성현의 가르침을 온유돈후(溫柔敦厚)하게 나타내고자 노력했다. 주제는 주로 그 당시 상황과 부합되는, 송축, 절의, 정쟁, 훈민, 한정, 강호도가, 안빈낙도, 애정 등이었다. 조선조 후기에 오면서는 사설시조(辭說時調)가 활성화하기 시작한다. 사림파의 득세와 양란(兩亂), 실학의 도입 등으로 조선조 후기에는 인식의 변화를 겪게 되었고, 이러한 변화가 시가 양식에도 적용되었기 때문이다. 결국 사설시조는 당대의 봉건주의 파괴, 유교적 모랄에 대한 반발, 근대적 특성 보유 남녀평등등 사상, 지배층에 대한 고발 및 저항정신 둥이 주축을 이루게 된다. 그러므로 저항적 리얼리즘적 현실지향적인 성향을 띠며 특히 고발문학 저항문학의 지반을 형성하는 장르적 특성을 지니고 있었다. 또한 무엇보다도 잡다한 일상사에 대한 상세한 묘사와 현실 생활에 대한 깊은 관심, 그에 대한 사실적, 구체적 표현은 사실주의 정신의 매개항이 된다는 점에서 근대성이 반영되어 있다고 보았다. 1905년 이후 신문에, 형식이나 내용 등, 여러 가지 측면에서 기존의 평시조나 사설시조에서 변이된 형태를 취하는 일군의 시조가 등장했다. 변이된 형태는 시조 텍스트의 형식과 내용뿐만이 아니라, 수용적 측면에서도 일어났다. 이때부터 시조는 '읊고 부르는 형태'에서 주로 '읽는 기록물'로 인식되기 시작하기 때문이다. 변이 된 시조 형태란, 당대의 시대를 풍자하는 '흥, 내지 흐응'이 삽입된 것, 종장의 어미가 생략된 것 등을 말한다 이러한 형식은 긴박한 상태를 효과적으로 전달할 수 있다는 특성을 지니기는 하지만, 고시조의 틀, 즉 율격이나 자수에서 많이 이탈되어서인지, 그 생명은 길지 못했다. 그러다가 1920년대 중반을 기점으로 해서 시조부흥운동이 일어나면서부터 시조 창작은 다시 활기를 띠게 되는데, 시조부흥운동은 최남선에 의해 주도되었다. 시작(詩作) 초기에는 서구지향의 시와 시조들 병행해서 쓰던 육당 최남선이, '조선국민문학(朝鮮國民文學)으로서의시조(時調)'라는 글을 통해 시조의 중요성과, 소중함을 언급하면서 시조부흥 운동을 선도한다. 그는 시조집, '백팔번뇌'도 출간하는데. 그의 전 시조집을 관통하는 것은 '조국 사랑'이라는 일 주제였다. 결국 육당은 고시조를 민족정신의 일환으로 보고, 시조양식을 채택하여 그 당시의 역사 사회적인 상황에 부합되는 주제를 표출한다. 결국 육당도 시조 텍스트를 재도지기(載道之器)로 여겼음을 알 수 있었다. 현대의 시조는 현대성(現代性)과 시조성(時調性)을 모두 만족시켜야 한다는 어려움을 지니고 있는데, 이는 전자에만 치중한다면 자유시와의 변별성이 문제가 되며, 후자를 고수하려니 고루하고. 시적 묘미가 없다는 비난을 감수해야만 하기 때문이다. 그래도 많은 작가들에 의해 평시조가 지속되고 있다는 것은 시조가 지니는 원형성에 대한 매력을 감지해서일 것이라고 보았다. 그들 중 특히 선정주의 작품에 주목했는데, 그 이유는 여러 가지이지만 특히 근대의식, 사회비판정신, 고발의식, 사실주의 정신 구현, 서민의식, 산문체 ·일상어 지향 등, 사설시조의 특징 및 성향을 잘 구현, 반영하면서 그 맥을 잇고 있고 있다는 점 때문이었다 이렇듯이 현대의 시조 작가들은 우리의 고시가 형식을 다양하게 선택해서 다양한 주제를 표출하고 있었다. 여기서 추정할 수 있는 사실은 이러한 시조의 유연성은 앞으로 시조의 생명을 항구적으로 할 것이라는 것, 그리고 역사 시대적 변화와 상황 하에서 다시 새로운 양상을 취할 가능성을 보인다는 것, 그리고 이 '시조'는 한국인의 '영원한 정형시 장르'로 남을 것이라는 사실이었다.

  • PDF