• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.474-480
• /
• 1996

Physicochemical changes of milt during the spermiation period were investigated in black seabream (Acanthopagrus schlegeli) reared in recirculating seawater system. The spermiation period for the milt collection in cultured brood stock was from 11 April to 4 June. During the spermiation period, average milt volume (ml/100 g body weight) was $0.70{\pm}0.33\;ml$ and maintained high level from 2 May to 4 June. The total number of stripping spermatozoa per 100 g body weight reached the maximum value $(3.32{\times}10^{10})$ in 9 May, then decreased rapidly thereafter. Spermatozoa concentration per ml reached the minimum value in 2 May. There was no change in spermatocrit for the spermiation period. Total protein, total lipid, glucose and Na concentration in spermatozoa and seminal fluid were lower than those in plasma. Total protein, total lipid and K concentration in spermatozoa were higher than those in seminal fluid. The glucose concentration in spermatozoa and seminal fluid in April and May were significantly higher than those in June.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.868-873
• /
• 1997

Nitrifier consortium entrapped in Ca and Ba-alginate beads were packed into two reactors and studied for removing ammonia-nitrogen in aquaculture system. The ammonia-nitrogen concentration of the influent was continually kept about 2 ppm. At the hydraulic residence time of 0.6 hours, ammonia-nitrogen removal amount of two reactors was about 52.6 and 51.0 g $NH_3-N/m^3/day$, respectively. The ability of adjusting to an impulsive leading which was happened according to variations of HRT was better at Ba-alginate reactor, but its discrepancy was not so large. At the respect of removing ammonium-nitrogen, two reactors showed the similar ability of treating recirculating water.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.181-186
• /
• 1998

The effects of sewage treatment on characteristics of sludge as a composting material were investigated for a year during the initial operation at the full-scale Chunan sewage treatment plant. Due to the shortage of design capacity of belt press, a sludge dewatering unit, non-volatile solids were recirculating and concentrating in the treatment plant, resulting in an increase of MLSS and a decrease in F/M ratio at the activated sludge system. Special attention is required for long term operations since the increase of non-volatile solids in the plant would deteriorates the treatment efficiency. The sewage sludge of the Chunan sewage treatment plant showed 79.5% of water content, 11.6% of organic content, and C/N ratio of 6.1, and contained As 1.8 mg/kg, Cd 27 mg/kg, Hg <0.1 mg/kg, Pb 54 mg/kg, T-Cr 370 mg/kg, and Cu 1,100mg/kg of heavy metals. In order to be used as raw material for optimum composting, the sewage sludge requires bulking agents for moistrure/porosity control and a carbon source for adjusting C/N ratio. However, the sewage sludge is not adequate as a soil conditioner after composing due to a high content of heavy metals. If the sewage sludge has to he used as a soil conditioner after composting, it as required to identify and remove tire industrial wastewater portions in tire influent of the plant since heavy metals in the influent were mostly concentrated in dewatered sludge.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.878-885
• /
• 2016

A study was conducted to examine the effects of light quality on the growth and phytochemical contents of ice plant in a closed-type plant production system. Seeds were sown in a 128-cell plug tray using rockwool. The seedlings were then transplanted into a deep floating technique system with recirculating nutrient solution (EC $1.5dS{\cdot}m^{-1}$, pH 6.5) in a closed-type plant production system. The nutrient solution was supplied at two weeks after transplanting with 2.0 mM NaCl concentration in all treatments for the development of the bladder cells. The three light sources with different light qualities used were as followed; FL (fluorescent lamps), combined RW LED (red:white = 7:3), and combined RBW LED (red:blue:white = 8:1:1) at $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD with a photoperiod of 14/10 hours (light/dark). The results showed that the FL treatment had the greatest growth enhancement effects on the leaf area and the fresh and dry weights of the shoots and roots. The SPAD values were significantly higher under the FL and RBW LED treatments, at 29.8 and 30.6, respectively. No significant difference was observed in salinity under all treatments. Chlorophyll fluorescence was significantly higher under the FL treatment. The total phenol content and antioxidant activity were the highest under the RBW LED treatment. The total flavonoid content was significantly higher under the RBW LED and FL treatments. Hence, the results indicate that the growth of ice plant was maximized under the FL treatment. The phytochemical contents were maximized under the RBW LED treatment.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.333-340
• /
• 2011

This study was conducted on the effect of plant growth retardants (PGRs) on growth of potted Ardisia pusilla and Ardisia pusilla var. variegata grown for a short term in an ebb and flow system. Plants were planted in 10 cm plastic pots, containing a mixture of peat moss and perlite (1 : 1, v/v) on 30 June 2005 and were grown until 23 Sep. 2005. The PGRs used were 50, 200, 350, 500 $mg{\cdot}L^{-1}$ daminozide (B- 9), 10, 40, 70, 100 $mg{\cdot}L^{-1}$ paclobutrazol (Boundy), and 5, 15, 25, 35 $mg{\cdot}L^{-1}$ ethephon (Florel). On every irrigation, the nutrient solution containing PGRs was supplied at a 2 cm depth and was kept for 15~20 minutes. The surplus nutrient solution was drained back into the tank for next irrigations. In both cultivars, paclobutrazol gave the most pronounced effect in inhibition of stretchiness. Ardisia pusilla, which was pinched just before initiation of paclobutrazol treatment, resulted in the greatest inhibition of shoot elongation. Daminozide treatments above 200 $mg{\cdot}L^{-1}$ also gave reduction of shoot length. However, ethephon treatments gave no dwarfing effect in Ardisia pusilla. Inhibition of stretchiness was observed even in the lowest concentration treatments. Among the PGRs, paclobutrazol was the most effective in suppressing plant stretchiness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1032-1043
• /
• 1989

The heat transfer characteristics of the drag reducing polymer solutions are investigated experimentally in the thermal entrance region of circular tube flows. Fluids used in experiments are the aqueous solutions of high molecular polymer, polyacrylamide Separan AP-273 and the range of polymer concentrations is from 20 to 1000 wppm. Two stainless steel tubes with inside diameter 8.5mm(L/D=712) and 10.3mm(L/D=1160) are used for the heat transfer flow loops. The flow loop is set up to measure friction factors and heat transfer coefficients of test sections in two different modes; the recirculating flow system and once-through flow system. The test tubes are heated directly by electricity to apply the constant heat flux boundary conditions to the wall. Three different types of adaptors are used to observe the effects of the upstream flow conditions of the heat transfer test sections. The viscosity and characteristic relaxation time of the test fluids circulating in the flow system are measured by the capillary tube viscometer and falling ball viscometer at regular time intervals. The installed adaptors exhibit slight effect on the entrance heat transfer of Newtonian fluid. However, no noticeable effects are observed for the entrance heat transfer of the drag reducing fluids. The order of magnitude of the thermal entrance lengths of the drag reducing fluids which follow the minimum friction asymptote is much longer than that of Newtonian fluids in turbulent flows. A new dimensionless parameter, the viscoelastic Graetz number, is defined and all the experimental data are recasted in terms of the viscoelastic Graetz number. The local Nusselt number of the viscoelastic fluids is represented as a function of flow behavior index n and the viscoelastic Graetz number. As degradation continues the viscosity and the characteristic relaxation time of the testing fluids decrease. Weissenberg number defined by the relaxation time and D/V appears to be a proper dimensionless parameter in describing degradation effects on heat transfer of the viscoelastic fluids.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.3-8
• /
• 2012

In the points of the environmental conservation and the recirculating utilization of limited resources, it is very important to recover valuable metals like Au, Ag, Pd, Cu, Sn, Ni, Co, and Li used as industrial raw materials from urban ores. From now, many processes have been developed for recovering the valuable metals contained in urban ores and some of them have been operated commercially. In the paper, pyrometallurgical processes developed for reclaiming valuable metals from urban ores will be briefly introduced.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.671-677
• /
• 2021

Interest in the everyday hazards of radon has recently increased as such, this study attempted to examine the dangers of radon in spilled groundwater by comparing the radon concentrations of the drained groundwater and tap water used in recirculating systems in Incheon Subway restrooms. At five stations of Incheon Subway Line 1 and three stations of Line 2, drained groundwater is recirculated and used in restrooms for toilet flushing. Stations restroom tap water for hand washing that used as a control and the measured values of each were compared. With the cooperation of Incheon Transportation Corporation, samples of spilled groundwater and tap water were collected sealed to prevent contact with the air, and a DURRIDGE RAD7 was used as the experimental equipment. The collected samples were subjected to radial equilibration for approximately 3.5 h, at which the radon concentration reached its maximum, and then calculated as 10 measurements using the RAD7 underwater radon measurement mode. In all eight stations, the radon concentration in tap water was lower than the recommended amount. However, in an average of 7 out of the eight stations, the radon concentration in the effluent groundwater was 100 times higher than that in tap water. Since high radon concentrations in groundwater runoff can be harmful to humans, and there is no accurate standard for radon concentrations in domestic water, it is necessary to continuously monitor radon in water and prepare a guidance of recommended values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2021

In this study, we aimed to develop a feed additive that can promote the growth of stone flounder (Kareius bicoloratus). To this end, we fermented mealworm medium (5%, w/v) with lactic acid bacteria (LAB) with antibacterial function (HeTm_LpWpPa) and evaluated its efficacy as a feed additive. Fish (approximately 5-6 g) were reared in six completely recirculating tanks (100 fish/tank) for 6 weeks. The total length of fish with and without HeTm_LpWpPa supplementation was 8.26 and 8.42 cm and body weight was 19.71 and 20.28 g, respectively, at 6 weeks. The weight gain of the control and experimental groups was 223.26 % and 248.76 %, respectively. The specific growth rate at 6 weeks was 2.79 % (control) and 2.98% (experimental), and the growth rate of the experimental group was slightly higher (0.19 %) than that of the control group. At the end of the experiment (i.e. 6 weeks), the number of fish below the mean weight in the experimental group was 3 (1 %) and that in the control group was 17 (5.7 %). These results indicate that feed supplementation of 10 % HeTm_LpWpPa could be utilized to promote the growth of flounder in farming.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.147-157
• /
• 2022

The backward-facing step (BFS) is a benchmark geometry for analyzing flow separation occurred at the edge and resulting development of shear layer and recirculation zone that are occupied by turbulent flow. It is important to accurately reproduce and analyze the mean flow and turbulence statistics of such flows to design physically stable and performance assurance structure. We carried out 3D RANS computations with widely used, two representative turbulence models, k-ω SST and RNG k-ε, to reproduce BFS flow at the Reynolds number of 23,000 and the Froude number of 0.22. The performance of RANS computations is evaluated by comparing numerical results with an experimental measurement. Both RANS computations with two turbulence models appear to reasonably well reproduce mean flow in the shear layer and recirculation zone, while RNG k-ε computation results in about 5% larger velocity between the outer edge of boundary layer and the free surface above the recirculation zone than k-ω SST computation and experiment. Both turbulence models underestimate the shear stress distribution experimentally observed just downstream of the sharp edge of BFS, while shear stresses computed in the boundary layer downstream of reattachment point are agree reasonably well with experimental measurement. RNG k-ε modeling reproduces better shear stress distribution along the bottom boundary layer, but overestimates shear shear stress in the approaching boundary layer and above the bottom boundary layer downstream of the BFS.