• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2007

Flow characteristics in a liquid fuel ramjet combustor were investigated using the PIV method. The combustor has two rectangular inlets that form a $90^{\circ}$ angle each other. Three cases of test combustors are made in which those inlet angles are $30^{\circ},\;45^{\circ}\;and\;60^{\circ}$. The experiments were performed in a water tunnel test with the same Reynolds number as Mach 0.3 at the inlet. PIV software was developed to measure the characteristics of the flow field in the combustor. A large and complex recirculating flow was measured in the dome area with 4 different dome size. Experimental results shows that 1/3 dome size of combustor diameter is suitable and smaller inlet angle provide large recirculation flow at the dome of combustor as a frame holder in this experimental ranges but need to consider secondary recirculation flow in a junction region to optimize the configuration of ramjet combustor.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2267-2276
• /
• 1996

Twin-fluid atomization has been widely used in combustors and process industries because of its high performance and simple structure. Flow visualization and pressure measurements were conducted to investigate the effects of gas flow in twin-fluid atomization. Schlieren photographs showed that changes in atomizing gas pressure, altered the wave patterns, and the lengths of both recitrculating toroid (impinging stangnation point) nad supersonic flow region in the jet. A longer supersonic wave pattern like net-shape wqas observed as atomizing gas pressure increased. The disintegration phenomenon of liquid delivery tube. The variation of spray angles with gas pressures were obtained by visualization using laser sheet beam. Suction pressuresat the nozzle orifice exit and recirculating region are shown to be used to estimate the stable atomization condition of a twin-fluid atomizer.

• ALGAE
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2014

Palmaria palmata was integrated with Atlantic halibut Hippoglossus hippoglossus on a commercial farm for one year starting in November, with a temperature range of 0.4 to $19.1^{\circ}C$. The seaweed was grown in nine plastic mesh cages (each $1.25m^3$ volume) suspended in a concrete sump tank ($46m^3$) in each of three recirculating systems. Two tanks received effluent water from tanks stocked with halibut, and the third received ambient seawater serving as a control. Thalli were tumbled by continuous aeration, and held under a constant photoperiod of 16 : 8 (L : D). Palmaria stocking density was $2.95kg\;m^{-3}$ initially, increasing to $9.85kg\;m^{-3}$ after a year. Specific growth rate was highest from April to June (8.0 to $9.0^{\circ}C$), 1.1% $d^{-1}$ in the halibut effluent and 0.8% $d^{-1}$ in the control, but declined to zero or less than zero above $14^{\circ}C$. Total tissue nitrogen of Palmaria in effluent water was 4.2 to 4.4% DW from January to October, whereas tissue N in the control system declined to 3.0-3.6% DW from April to October. Tissue carbon was independent of seawater source at 39.9% DW. Estimated tank space required by Palmaria for 50% removal of the nitrogen excreted by 100 t of halibut during winter is about 29,000 to $38,000m^2$, ten times the area required for halibut culture. Fifty percent removal of carbon from the same system requires 7,200 to $9,800m^2$ cultivation area. Integration of P. palmata with Atlantic halibut is feasible below $10^{\circ}C$, but is impractical during summer months due to disintegration of thalli associated with reproductive maturation.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.37-44
• /
• 2005

We have conducted a numerical simulation under three-dimensional unsteady conditions in order to analyze the characteristics of flow and the distribution of $CO_2$ agent concentration according to the number of $CO_2$ agent nozzle. The engine room of a ship was selected as a protection space, and flow fields and $CO_2$ concentration fields were measured. In case of increasing the number of $CO_2$ nozzle from 2 nozzles to 4 nozzles, the distribution of CO2 concentration showed low, and in case of increasing the number of $CO_2$ nozzle to above 6 nozzles, the recirculating flow affected to all region was generated. In case of increasing the number of $CO_2$ agent nozzle to above 4 nozzles, the iso-concentration line below 0.36 expanded or contracted slightly. Therefor, the proper number and the arrangement of $CO_2$ agent nozzle are considered when $CO_2$ fire fighting system is designed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.22-28
• /
• 2013

The heat transfer characteristics of LNG(Liquefied Natural Gas) vaporizer on the ship was performed by numerical simulation to get the optimum NG(Natural Gas) generating condition. The glycol-water was used for heating in LNG vaporizer, and the cooling water of main engine was used as heating souse for glycol-water. This cooling water temperature increases again after recirculating from the main engine, and then it can be used to heat the glycol-water. The numerical analysis results has good agreement with the experimental results by liquid nitrogen for validation. So CFD technique was used to simulate the heat transfer characteristics of LNG vaporizer on the ship. The numerical results show that the operation condition of LNG vaporizer shows NG temperature of $6^{\circ}C$ in the outlet of LNG vaporizer, and the mass flow rates of LNG and glycol-water were showed 0.111 kg/s and 1.805 kg/s, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.732-742
• /
• 1985

Measurements of mean velocity and turbulence characteristics are obtained with a linearized constant temperature hot-wire anemometer in a two-dimensional turbulent jet discharging parallel to a flate. Wall static pressure distribution is also measure. The Reynolds number based on the jet nozzle width (D) is about 42,000 and the step height is 2.5D. The reattachment length is found to be 7.5D by using both wool tuft and oil methods. Upstream of the reattachment point, there exist double coherent structures and mean velocity, Reynolds stresses and triple product profiles are asymmetric about jet center line due to the influence of streamline curvature and recirculating flow region. Near the reattachment point, wall static pressure and turbulence quantities change its shape rapidly because of the large eddies by the solid wall. Especially, turbulence intensity has a maximum value in the reattachment regin, then decreases slowly in the redeveloping wall jet ragion. Downstream of X/D=14, a single large scale eddy structure is formed. Far downstream affer the reattachment(X/D.geq.18) mean velocity profile, the decay of maximum velocity and the variation of jet half width are nearly similar to those of plane wall jet, but the Reynolds stresses are higher than those of the latter.

• Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.176-193
• /
• 2007

The ability to measure groundwater contaminant flux is increasingly being recognized as crucial in order to prioritize contaminated site cleanups, estimate the efficiency of remediation technologies, measure rates of natural attenuation, and apply proper source terms to model groundwater contaminant transport. Recently, a number of methods have been developed and subsequently applied to measure contaminant mass flux in groundwater in the field. Flux measurement methods can be categorized as either point methods or integral methods. As the name suggests, point methods measure flux at a specific point or points in the subsurface. To increase confidence in the accuracy of the measurement, it is necessary to increase the number of points (and therefore, the cost) of the sampling network. Integral methods avoid this disadvantage by using pumping wells to interrogate large volumes of the subsurface. Unfortunately, integral methods are expensive because they require that large volumes of contaminated water be extracted and managed. Recent work has investigated the development of an integral method that does not require extraction of contaminated water from the subsurface. We begin with a review of the significance and importance of measuring groundwater contaminant mass flux. We then review groundwater contaminant flux measurement methods that are either currently in use or under development. Finally, we conclude with a qualitative comparison of the various flux measurement methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.118-124
• /
• 2007

The efficiency of the hybrid systems which are composed of compound planetary gear sets depend on the amount of the recirculating energy among the motors and battery. This paper studies the analysis of the system efficiency with the parameters, ${\alpha},\;{\beta},\;{\gamma_a},\;{\gamma_b}$ and $\gamma_s$. The efficiency of the systems and the relative torque, speed and power of the power resources are represented by these parameters. The recuperating parameter $\kappa$ which makes the systems generalized is introduced, so the efficiencies of the modes such as the hybrid mode, the engine mode, the motoring mode and the recuperating mode are analyzed with simple equations. The tendency of the system efficiency according to the variations of the $\gamma_s$ and $\kappa$ are studied, by which it can be possible to reduce the loss of the power because the strategies for avoiding the singular speed ratio $\gamma_s$ are helpful for the system efficiency and specific value of $\kappa$ can increase the efficiency of the systems.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 1992.07a
• /
• pp.7-19
• /
• 1992

Fish pathology is one of the main scientific bases upon which this expansion in aquaculture has been dependent and requires a wide knowledge of the environmental constraints, the physiology and characteristics of the various pathogens, the responses of the host and the methods by which they may be controlled. The primary disease and parasite problems in aquaculture animals relate to viral, bacterial, fungal and protozoan epizootics. Parasitic nematodes, trematodes and cestodes are commonly found in aquaculture animals, but seldom are they present in concentrations sufficinet to cause significant problems. When an epizootic does occur and chemical treatment is indicated, the appropriate chemical must be selected and properly applied. We have antibiotics, sulfa, nitrofuran and other chemicals for treatment of fish diseases. Some may be mixed with the fred during formulation, added to the pellets of feed as a surface coating, given in the dorm of an injection or used as a bath. Even though a drug or chemical has been officially approved for use in aquaculture, the substance should never be used unless there is a clear need. Some of the reasions for this view are as follows: (1) the constant use of antibiotics can lead to the development of resistant strains of bacteria, (2) biofilter efficiency may be impaired or destroyed by chemicals added to closed recirculating water systems, and (3) the injudicious use of chemicals can have a damaging effect on the environment as well as on human.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.1038-1045
• /
• 2001

The electrokinetic technology was applied in bioremediation for the purpose of supplying a Pseudomonas strain capable of degrading diesel to contaminated soil bed, and their biodegradation of diesel was carried out after a desired cell distribution was obtained. Electrokinetic injection of the strain was made possible because the cells acted as negatively charged particles at neutral pH, and thus the cells were transported with a precise directionality through the soil mostly by the mechanism of electrophoresis and in part by electroosmosis. A severe pH change in the soil bed was formed due to the penetration of electrolysis products, which was harmful to the cell viability and cell transport. To achieve a desirable cell transport and distribution, the control of pH in soil bed by a recirculating buffer solution in electrode chambers was essential during the appliation of an electric field. The judicious selections of electrolyte concentration and conductivity were also important for achieving an efficient electrokinetic cell transport since a higher electrolyte concentration favored the maintenance of pH stability in soil bed, but lowered electrophoretic mobility on the other hand. With electrolyte solution of pH 7 phosphate buffer, a 0.05 M concentration showed a better cell transport buffer, a 0.05 M concentration showed a better cell transport than 0.02 M and 0.08 M. The cell under pH 8 were obtained, compared to the cells under pH 7 or pH 9 in a given time period Up to $60\%$ of diesel was degraded in 8 days by the Pseudomonas cell, which were distributed electrokinetically under the conditions of pH 8 ($1,800{\mu}S/cm$, a mixture of phosphate and ammonia buffers) and 40 mA in a soil bed of 15 cm length.