• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2003년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.219-220
• /
• 2003

The success of recirculating system depends largely on the treatment efficiency of waste generated in the system. fine solids were suspected to be responsible for fish kill in a recirculating system. Clogging of biofilter may be induced by high solids concentration in recirculating systems. Also, the solids could generate more ammonia nitrogen and oxygen demand if not removed out of recirculating system as soon as possible (Weeks et al., 1992). (omitted)

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.125-125
• /
• 2003

Recirculating aquaculture systems consist of different treatment compartments that maintain water quality within the ranges of commonly recommended for fish culture. This paper presents the common considerations in designing different treatment compartments as well as the engineering criteria in designing closed recirculating aquaculture system including a circular tank for fish culture, a sedimentation basin and a foam fractionator for solids removal, two styrofoam bead filters for TAN removal, a sand filter for nitrate removal, and aerators. The main purpose is to outline a common procedure in designing of closed recirculating aquaculture system for marine fish culture.

• 한국수산과학회지
• /
• 제40권2호
• /
• pp.73-78
• /
• 2007

The suitability of a flexible fiber filter for removing suspended solid (SS) in a recirculating aquaculture system was evaluated. This study focused on variation in the performance with a change in filtering time, influent water quality, and filtering mode duration. The particle distribution diagram of the filter effluent showed that the number of particles bigger than $5-8{\mu}m$ decreased dramatically, and the removal efficiency exceeded 80%. Although the removal efficiencies of SS and chemical oxygen demand (COD) were dependent on the quality of the influent, the SS and COD concentrations of the effluent were not affected by the influent concentrations. This was despite the deterioration if water quality after feeding in the rearing tank. The performance of the filter was not affected by the filtering mode duration, feeding conditions, or filtering time. The SS concentration and turbidity of the recirculating-type rearing tank were 30% and 50% lower, respectively, than of the a non-recirculating-type rearing tank under the same operating conditions. The flexible fiber filter was applicable to a recirculating aquaculture system that uses plenty of seawater, based on its low filtering resistance $(2kg_f/cm^2)$, high flux $(330m^3/m^2/hr)$, and high fine particle removal efficiency (80%, $5-8{\mu}m$).

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.36-41
• /
• 2005

This study investigated the performance of a vortex hydrocyclone for solid removal in a recirculating aquaculture system. In a fish-breeding industry, effluent water is mainly disposed by gravity sedimentation. Thus, a large settling tank and a lot of water are needed to purify effluent water. However, this typical method does not show consistent efficiency. In case of low efficiency, discharged water contains a lot of feeding sediments. This causes environmental problems. Instead of this typical method a hydrocylone is tested to discharge water which contains a lot of feeding sediments. In this paper, a hydrocyclone with low velocity and pressure drop in a recirculating aquaculture system is investigated.

• 한국재료학회지
• /
• 제20권2호
• /
• pp.90-96
• /
• 2010

The recirculating electrochemical flow reactor developed at UCLA has been employed to fabricate nanostructured GMR multilayers. For comparison, Ni/Cu multilayers have been electrodeposited from a single bath, from dual baths and from the recirculating electrochemical flow reactor. For a magnetic field of 1.5 kOe, higher GMR (Max. -5%) Ni/Cu multilayers with low electrical resistivity (< $10\;{\mu}{\Omega}{\cdot}cm$) were achieved by the electrochemical flow reactor system than by the dual bath (Max. GMR = -4.2% and < $20\;{\mu}{\Omega}{\cdot}cm$) or the single bath (Max. GMR = -2.1% and < $90\;{\mu}{\Omega}{\cdot}cm$) techniques. Higher GMR effects have been obtained by producing smoother, contiguous layers at lower current densities and by the elimination of oxide film formation by conducting deposition under an inert gas environment. Our preliminary GMR measurements of Ni/Cu multilayers from the electrochemical flow reactor obtained at low magnetic field of 0.15 T, which may approach or exceed the highest reported results (-7% GMR) at magnetic fields > 5 kOe.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.364-372
• /
• 2006

The objective of this study is to evaluate the efficiency and the prediction accuracy of developed large eddy simulation (LES) program for complex turbulent flows, such as recirculating and swirling flows. To save the computational cost, a Beowulf cluster system consisting 16 processors was constructed. The flows in backward-facing step and dump combustor were examined as representative recirculating and swirling flows. Firstly, a direct numerical simulation (DNS) for laminar backward-facing step flows was previously conducted to validate the overall performance of program. Then LES was carried out for turbulent backward-facing step flows. The results of laminar flow showed a qualitative and quantitative agreement between simulations and experiments. The simulations of the turbulent flow also showed reasonable results. Secondly, LES results for non-swirling and swirling flows in a dump combustor were compared with the results of Reynolds-averaged Navier-Stokes (RANS) using standard $k-{\varepsilon}$ model. The results show that LES has a better performance in predicting the mean axial and azimuthal velocities, comer recirculation zone (CRZ) and center toroidal recirculation zone (CTRZ) than those of RANS. Finally, it was examined the capability of LES for the description of unsteady phenomena.

• 한국추진공학회지
• /
• 제1권2호
• /
• pp.22-31
• /
• 1997

비직교 일반좌표계를 사용하는 범용 연소유동해석 프로그램을 개발하여 재순환영역을 가지는 연소유동 등을 해석하였다. 본 프로그램은 유한체적법에 근간을 둔 비엇갈림격자계를 사용하며 직교좌표 속도성분을 종속변수로 하였다. 연소모델은 무한반응속도의 1단계 비가역 반응을 고려하였으며, 밀도가중평균된 지배방정식을 고려하였다. Conserved Scalar의 확률밀도함수를 clipped gauss 분포로 가정하였다 본 프로그램을 사용하여 재순환영역을 가지는 난류확산화염을 계산하였다. 계산결과는 실험결과와 마찬가지로 두개의 재순환영역을 보였으며, 속도, 난류운동에너지, 온도 및 농도 등이 실험결과와 양호하게 일치하는 결과를 얻을 수 있었다.

• 미생물학회지
• /
• 제55권2호
• /
• pp.174-176
• /
• 2019

Flavobacteriaceae 과에 속하는 신균주인 RR4-38(= KCTC 52651 = DSM 108068)가 한국의 해수 순환여과양식시스템의 생물여과조에서 분리되었다. 41.9%의 G+C 함유량을 가진 3,182,272 bp의 길이의 하나의 완전한 유전체 컨티그가 PacBio RS II를 이용하여 얻어졌다. 이 유전체는 2,829개의 단백질 암호화 유전자와 6개의 rRNA 유전자, 38개 tRNA 유전자, 4개의 ncRNA 유전자, 9개의 유사유전자를 포함하고 있다. 이 결과는 해수 순환여과양식시스템에서 미생물의 활성을 이해하는데 통찰력을 줄 것이다.

• 수산해양기술연구
• /
• 제60권1호
• /
• pp.87-99
• /
• 2024

This study deals with the application of an artificial neural network (ANN) model to predict power consumption for utilizing seawater source heat pumps of recirculating aquaculture system. An integrated dynamic simulation model was constructed using the TRNSYS program to obtain input and output data for the ANN model to predict the power consumption of the recirculating aquaculture system with a heat pump system. Data obtained from the TRNSYS program were analyzed using linear regression, and converted into optimal data necessary for the ANN model through normalization. To optimize the ANN-based power consumption prediction model, the hyper parameters of ANN were determined using the Bayesian optimization. ANN simulation results showed that ANN models with optimized hyper parameters exhibited acceptably high predictive accuracy conforming to ASHRAE standards.

• 한국수산과학회지
• /
• 제34권1호
• /
• pp.70-76
• /
• 2001

우리나라의 실정에 적합하고 실용적인 순환 여과식 양식 시스템을 개발하여 package 형태로 개발하기 위하여 $2.5 m^3$ 규모의double drain 형태의 사육조와 침강성 고형물질을 제거하기 위한 침전조, 부유성 고형물의 제거를 위한 floating bead filter, 용존고 형물을 제거하기 위한 포말 분리기와 암모니아성 질소를 제거하기 위한 회전 원판 반응기를 조합한 순환 여과식 양식 시스템을 설계하고 제작하였다. 본 시스템에 평균 어체중 392.8g의 나일 틸라피아 173마리를 수용하여 일간 보충수를 사육조 용적의 $10\%$를 사용하여 14일간 어류사육을 실시한 걸과 사육조의 수질을 보충수와 거의 동일한 수질로 유지할 수 있었으며 사료계수 1.4, 일간 성장률 0.64를 얻을 수 있었다.