• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6258-6263
• /
• 2014

하이브리드 자동차나 전기 자동차에 사용되는 LDC(Low Voltage DC-DC Converter)는 고전압 배터리 측의 높은 DC 전압을 입력 받아 낮은 전압인 12V로 강하시켜 전장부하 장치의 전원 공급 및 보조 배터리의 충전용으로 사용된다. LDC는 생산 공정 중에 장시간의 부하시험을 하는데 부하시험 시 전력을 100% 열로 방출하는 구조로 에너지 소비가 매우 큰 단점이 있다. 따라서 본 논문에서는 재생형 방식의 부하시험 방법을 제안하여 낭비되는 전력의 75~90%의 에너지 절감을 실현하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.745-745
• /
• 2002

Both geophysical and geospatial data provide important information in the establishment of the optimal telecommunication systems especially in the mobile telecommunication environment. The objective of this study is to utilize geophysical properties and geospatial information in the analysis of the telecommunication environment through point-to-point wave property modeling. Geophysical properties associated with wave propagation parameters of the earth surface were analyzed based on hierarchical land classification using Landsat ETM＋ and IKONOS images. Three-dimensional geospatial information was obtained by processing stereo aerial images. The results show that the accurate geospatial information and reliable geosphysical property of the surface improve the prediction of receiving power of the receivers located near corners of the buildings where diffractions occur. The wave property model developed from accurate telecommunication environment could be applied to optimal cell planning and delay time analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.823-825
• /
• 2003

A sensor system was designed to measure real time vibro displacement of civil structure. The He-Ne laser is used for the displacement measuring method, because it guarantees short time stabilization, long time output power stability. Also, it guarantees simple maintenances and repairs under actual using condition. The line CCD image sensor(Tcd-142d) is used to detect the displacement of Ne-Ne laser responding to the vibro of civil structure. For accurate measurement and comparison, CDP-50 is used. Usually CDF-50 (Strain type displacement device) is used for the standard correction device of optical measurement equipments. The data processing part is consists of Optical sensor part, Wireless data transmission device, DAQp-1200, and LapView program. The displacement data of vibro from optical sensor part inputted to wireless data transmission device and then transmitted to DAQp-1200 in main control room. DAQp-1200 performs A/D conversion for the receiving data. After that the converted data inputted to computer system using LapView program for user display. The significance of this paper is to develope a convenient, accurate and lost saving real time displacement measurement system for the civil structure.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제52권1호
• /
• pp.65-82
• /
• 2013

This study has to do with storytelling. In this study, analyzed the domestic and international academic literature and scientific papers. The purpose of this study is to provide the meaningful basic material on mathematics education for the development of storytelling lesson model and teaching material. First, we analyze the causes and background storytelling appeared. The psychologists found that the human cognition's structure consists of a narrative system. And, We realize that the problem 'How will attract the attention of the students in math class' will be solved by storytelling. Second, the means of storytelling about the educational value and benefits were discussed in Mathematics Education. The story has a powerful force in the delivery of mathematical content. And, the story has strong power, led to feelings of students receiving transfer mathematical content. Finally, examined the characteristics of the psychology of learning in mathematics education by storytelling. We were studied about internal and external story. And, we studies on storytelling as the mediator, story as the knowledge transfer, story as the problem-solving process, story as the script.

• 대한지역사회영양학회지
• /
• 제9권3호
• /
• pp.326-332
• /
• 2004

The research objective was to identify the effect of various instruction media on improving students' foodservice management competencies and for increasing class satisfaction. The research involved a comparison of two student groups. One group consisted of students who attended a lecture-based food purchasing class (Group A). The other group was students who attended the same class, and who also used various media as well as receiving the lecture (Group B). The results were as follows: 1) After a 16 week program, Group B perceived their procurement management competencies to be higher than those of Group A, especially in setting up purchasing goals, marketing research, and using computer systems for procurement; 2) In terms of class satisfaction, it was also observed that Group B was more satisfied with food purchasing class than was Group A. Group B gave high scores, especially in effective utilization of media, increasing motivation, and understanding; 3) Group B perceived that various instruction media was helpful for developing their procurement management competencies. Respondents evaluated the usefulness of media in the following order: using Power Point watching videos, visiting web-sites for food purchasing class, and surfing the World Wide Web. The results of the research show that using various instruction media for food purchasing classes would improve students' foodservice management competencies. Therefore, instructors who teach foodservice management related courses should consider developing teaching strategies that apply various instruction media for students to enhance their foodservice management competencies and to increase class satisfaction.

• ETRI Journal
• /
• 제43권4호
• /
• pp.702-716
• /
• 2021

This work proposes suitable network configurations for single frequency networks (SFNs) with ATSC 1.0 based on network coverage calculations and the laboratory multipath handling performance of commercial receivers. SFNs are widely used for delivering terrestrial digital television services because of their efficient use of the spectrum. In Mexico the analogue television transmissions switch-off occurred on 31 December 2016. Thus it is expected the adopted ATSC 1.0 system will be in force for the next several years despite the recent standardization of the ATSC 3.0 system. As ATSC 1.0 uses 8-VSB modulation the multipath handling capability of receivers is critical for the design of SFNs. The presented network planning results help develop technical normativity for implementing SFNs in Mexico and other countries that use ATSC 1.0. SFNs with transmitter separation up to 130 km are fully covered for outdoor reception mainly due to the directivity of the receiving antenna. Moreover for indoor reception at least 70% of an SFN coverage area can be achieved with a transmitter separation of up to 60 km depending on the radiated power and the transmitter antenna height.

• Journal of Multimedia Information System
• /
• 제6권2호
• /
• pp.107-118
• /
• 2019

This paper deals with actual optical data from rural as well as urban areas in a nationwide study captured with Fisheye cameras. Simultaneously data was collected (of the receiving power density) from the mobile communications satellite N-STAR. The visibility of the satellite is easily determined by checking the value of the pixels in the binarized fisheye image of its position. The process of determining the visible satellite is automatically performed. Based on the analyses of the field data measured in Japan, we are expecting HEOs (Highly inclined Elliptical Orbiters) that would reduce blockage in the extreme northern region of Wakkanai City well as in the most crowded urban area, in Tokyo Ginza. In case of HEOs operation, the elevation angle will improve from 37 with N-STAR GEO to 75 degrees. HEOs could replace 5G/Ka-band or support in rural areas where broadband circuit is not available. We are proposing combination operations with HEOs and 5G/Ka-band to solve blockage problems, because HEOs can keep line-of-sight propagation with high elevation angle for long duration. In such operations, the communications profile on the vehicle based on actual optical data will be very useful to predict blockages and to select/switch a suitable circuit.

• 한국지열·수열에너지학회논문집
• /
• 제17권1호
• /
• pp.23-32
• /
• 2021

Conventional wind power generators have limited installation sites due to low efficiency due to reverse resistance or high cut-in speed. To compensate for these problems, this study proposed another new type of tilting wind turbine. The key to this method is the structural design of a cylindrical cam with a guide groove that allows the blade to tilt. As the blade rotates by the cam, it tilts according to the angle. In the section that generates torque by receiving drag, the blade is made perpendicular to the wind. And it is a structure that creates a parallel state with the wind in the section where reverse resistance occurs. We prepared six types of cams considering the length of the section subject to drag, reverse resistance, tilting section. The performance was analyzed as the maximum value of the output, torque coefficient, and efficiency coefficient, which is indicated by setting different wind speed and low TSR.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.617-627
• /
• 2021

Underwater Acoustic Channels (UAC) have inherent sparse characteristics. The traditional adaptive equalization techniques do not utilize this feature to improve the performance. In this paper we consider the Variable Adaptive Subgradient Projection (V-ASPM) method to derive a new sparse equalization algorithm based on the Minimum Symbol Error Rate (MSER) criterion. Compared with the original MSER algorithm, our proposed scheme adds sparse matrix to the iterative formula, which can assign independent step-sizes to the equalizer taps. How to obtain such proper sparse matrix is also analyzed. On this basis, the selection scheme of the sparse matrix is obtained by combining the variable step-sizes and equalizer sparsity measure. We call the new algorithm Sparse-Control Proportional-MSER (SC-PMSER) equalizer. Finally, the proposed SC-PMSER equalizer is embedded into a turbo receiver, which perform turbo decoding, Digital Phase-Locked Loop (DPLL), time-reversal receiving and multi-reception diversity. Simulation and real-field experimental results show that the proposed algorithm has better performance in convergence speed and Bit Error Rate (BER).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3780-3797
• /
• 2022

The estimation of radio map (RM) is a fundamental and critical task for the network planning and optimization performance of mobile communication. In this paper, a RM estimation method is proposed based on a deep dual learning structure. This method can simultaneously and accurately reconstruct the urban building map (UBM) and estimate the RM of the whole cell by only part of the measured reference signal receiving power (RSRP). Our proposed method implements UBM reconstruction task and RM estimation task by constructing a dual U-Net-based structure, which is named RadioCycle. RadioCycle jointly trains two symmetric generators of the dual structure. Further, to solve the problem of interference negative transfer in generators trained jointly for two different tasks, RadioCycle introduces a dynamic weighted averaging method to dynamically balance the learning rate of these two generators in the joint training. Eventually, the experiments demonstrate that on the UBM reconstruction task, RadioCycle achieves an F1 score of 0.950, and on the RM estimation task, RadioCycle achieves a root mean square error of 0.069. Therefore, RadioCycle can estimate both the RM and the UBM in a cell with measured RSRP for only 20% of the whole cell.