• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.478-490
• /
• 2007

A technology of ultrasonic biotelemetry for tracking fish behavior is investigated. The ultrasonic biotelemetry system is constituted by a transmitter and a receiving system. Because a pinger was mainly used for the transmitter, the capability for pinger to possess was investigated and the efficient usage for pinger was examined. A source pressure level and a frequency were synthetically examined so that pinger could realize small size, a light weight, and a long life time. The receiving system is divided roughly into directional hydrophone systems and acoustic positioning systems by the receiving method. The directional hydrophone system is divided into single beam and multiple beam with the number of hydrophone, and the acoustic positioning systems is divided into LBL (Long Base Line), SBL (Short Base Line), and SSBL (Super Short Base Line) on the basis of base line. The present situation, the merits and demerits, and the principle of each receiving method were investigated in detail, and the efficient usage for each receiving method were examined.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.455-463
• /
• 2022

This study proposes a receiving pad identification coil for wireless charging of electric vehicles. The proposed coil identifies the shape of the receiving pad through magnetic coupling with the receiving pad. Therefore, the shape of the coil is designed to show the different magnetic properties of each receiving pad. The accuracy of this design is verified through finite element method simulation. Furthermore, the operation method of the secondary pad identification circuit is described, and the appropriate magnitude and length of the pulse voltage applied to this circuit for receiving pad identification are derived through simulation. The performance of the proposed identification coil set is verified by the experimental results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2009

In this paper, a method is proposed for the analysis of radiowave receiving characteristics of an ammunition with electric detonator. In this method, an ammunition with electric detonator is modelled as a receiving antenna with its gain obtained by computer simulation or measurement. The induced radiowave power is obtained by inserting the gain of the electric detonator in the antenna coupling formula. Radiowave receiving characteristics at very close distances are obtained by Treasuring the transmission coefficient between a half-wave dipole and the electric detonator model. Radiowave receiving characteristics of the electric detonator in a 105mm tank ammunition are obtained using the proposed method and the safety of the 900 MHz RFID reader on the detonator is assessed.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.147-155
• /
• 2014

This paper suggests a specific model that could efficiently improve the interaction and the interface between WMS(Warehouse Management System) terminal and PDA terminal through real time processing in manufacturing shop. The proposed model shows that the new method can more efficiently perform to reduce processing time for shipping and receiving, compared with the current approach. As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in case of the new proposed system that the effects of proposed model are as follows: (a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead time by the new method was 20 minutes. (b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time by the new method was 15 minutes. (c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy by the new method was 98%.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.97-104
• /
• 2021

Securities and investment services had the most data per company on the average, and used the most data. Investors are increasingly demanding to invest through their own analysis methods. Therefore, securities and investment companies provide stock data to investors through open API. The data received using the open API is in text format. Python is effective and convenient for requesting and receiving text data. We investigate there are 22 major securities and investment companies in Korea and only 6 companies. Only Daishin Securities Co. supports Python officially. We compare how to receive stock data through open API using Python, and Python programming features. The open APIs for the study are Daishin Securities Co. and eBest Investment & Securities Co. Comparing the two APIs for receiving the current stock data, we find the main two differences are the login method and the method of sending and receiving data. As for the login method, CYBOS plus has login information, but xingAPI does not have. As for the method of sending and receiving data, Cybos Plus sends and receives data by calling the request method, and the reply method. xingAPI sends and receives data in the form of an event. Therefore, the number of xingAPI codes is more than that of CYBOS plus. And we find that CYBOS plus executes a loop statement by lists and tuple, dictionary, and CYBOS plus supports the basic commands provided by Python.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.318-325
• /
• 2003

The new biotelemetry method and system that the installation and the treatment of equipment is convenient and the instantaneously detailed position of the fish attached the pinger is able to track comparatively easily had been developed, an availabilities of it were verified in water tank by using hydrophone and pinger. First of all, the receiving system for biotelemetry was calibrated so as to measure tracking of high precision or wide detection range. In the next place, the precision at narrow and wide beam array of receiving system by using hydrophone was investigated and the actual position was compared with measured hydrophone position. The mean standard deviations of the position by narrow beam array of receiving system were 6.4em in phase beam of fore-aft pair and 6.3em in starboard-port pair, and the wide beam array were 24em and 23em respectively. The precision of distance, position, and velocity at narrow beam array of receiving system by using pinger were investigated and the actual values were compared with measured values. The distance from receiving system to pinger was measured by the pinger synchronizing method, angle of direction of pinger was detected by the super short base line (SSBL) method. The three dimensional position of pinger to the receiving system was measured by combining of two kinds of methods (SPB method), the velocity of pinger was obtained with a differential of the three dimensional positions. The mean standard deviations of the distance by pinger synchronizing method in narrow beam array of receiving system was 1. 8 em, that of the position by SPB method was 7.7cm.

• Archives of Pharmacal Research
• /
• v.12 no.2
• /
• pp.114-118
• /
• 1989

The effects of intraperitoneal injection of cephradine in a dose of 75 mg/kg and netilmicin in dose of 50 mg/kg and their combination on creatinine and urea serum levels of rabbits were studied as well as the antipseudomonal activity against three multiresistant clinicial isolates. The antibacterial activity was investigated by two methods: Checkerboard titration method and time-kill studies. Finally, the antibacterial activity of the sera obtained from the rabbits receiving the used drugs in the previous regimen was studied using time-kill study method against Pseudomonas aeruginosa isolates. Results obtained from this study indicated that both creatinine and urea serum levels of the rabbits receiving both drugs were not significantly different from those of the rabbits receiving either cephradine or netilmicin alone. At the same time the in vitro antibactrial activity (either of the prepared solutions of the used drugs and their combination or of the sera obtained from the rabbits receiving these drugs as mentioned before) showed a synergistic effect against the tested strains of Pseudomonas aeruginosa

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.78-87
• /
• 1996

in urban cross-roads with dense buildings, receiving power and delay spread were computed when doing these, we were able to develope codes to be executed in a very fast time by combining image method and algorithm for propagation paths compairing with ray launching technique. And receiving power and delay spread could be viewed in 3-dimensional picture by virtue of computing electric fields in arbitrary receiving point. For numerical computation, receiving power of wide and anrrow band and delay spread were computed, and extension method of ray numbers was facilitated for handling infinite number of rays.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2012

In this paper, requirements of GNSS receiver station installation are derived for optimizing the performance of network based GNSS precise positioning by concern of international organization(IGS, NGS) recommendation. Also a analysis method of network based GNSS precise positioning is suggested in order to evaluate the availability depending on various network configurations. To evaluate network candidates, a performance evaluation method is proposed for positioning of users according to a geometric configuration and the baseline distance. After the proposed method is used to Ochang region that is a the test area 6 network candidates are derived and the performance of positioning was analyzed. Finally, Ansung, Gongju, Eumsung, Boeun network configuration was selected as the best positioning performance. An optimal Receiving station network was selected using the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.59-66
• /
• 2018

Data Distribution Service(DDS) provides the communications service programmers need to distribute time-critical data between embedded and/or enterprise devices or nodes. In this paper, I propose efficient methods for transmitting and receiving messages of various characteristics in real-time using DDS middleware. For high-frequency characteristic data, I describe several DDS packet types and various default and extended DDS QoS policies. In particular, the batching method is probably the best solution when considering several performance aspects. For large-capacity characteristic data. I will show a method using extended DDS QoS policies, a segmentation and reassembly method, and transmitting and receiving a large-capacity data with low priority method considering network conditions. Finally, I simulate and compare the result of performance for each methods. This results will help determine efficient methods for transmitting and receiving messages of various characteristics using DDS middleware.