• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.194-201
• /
• 2009

In this paper, a new spectrum sensing method based on energy detection is proposed and analyzed in a cognitive radio(CR) system. We employ a delay diversity receiver for sensing the primary user's spectrum with reasonable cost and complexity. Conventional CR with the receiver equipping multiple antennas requires additional hardware and space for installing multiple antennas in accordance with increase in the number of antennas. If the number of antennas increases, detection probability as well as hardware complexity and cost rise. Then, it is difficult to make a primary user detector practically. Therefore, we adopt a delay diversity receiver for solving problems of the conventional spectrum detector utilizing multiple antennas. We derive analytical expressions for the spectrum sensing performance of the proposed system. From the simulation results, it is demonstrated that the primary user detector with the delay diversity receiver has almost half the complexity and shows similar or improved performance as compared with that employing multiple antennas. Therefore, the proposed spectrum sensing structure can be a practical solution for enhancing the detection capacity in CR system operations. The results of this paper can be applied to legacy CR systems with simple modifications.

• 방송공학회논문지
• /
• 제5권2호
• /
• pp.273-280
• /
• 2000

건물 외부에 위치하는 송신기와 건물 내부에 위치하는 수신기 사이의 채널 특성을 분석하기 위해 전파 추적 기법을 기반으로 한 모의 실험을 수행하였다. 본 모의 실험에서는 건물 내에 29개의 수신기를 설치하고, 각 수신기에서의 수신 특성을 다중 경로를 통해 수신된 여러 개의 신호의 상호 간섭 패턴을 이용하여 분석하였다. 모의 실험 결과에서 수신기의 위치와 송신기의 위치 및 전파의 편파 특성에 따라 수신 특성이 다르게 나타났고, 상쇄 간섭으로 인해 창가 쪽에 위치한 수신기의 수신 파워가 건물 안 쪽에 위치한 수신기의 수신 파워보다 작게 나타나는 경우도 있었다. 본 논문에서는 채널 파라미터들, 즉 mean excess delay와 rms delay spread를 통해 송신기와 수신기간의 채널 특성 분석도 수행하였다.

• ETRI Journal
• /
• 제36권2호
• /
• pp.188-196
• /
• 2014

This paper describes a simple delay diversity technique for terrestrial digital multimedia broadcasting (T-DMB) and digital audio broadcasting in a single-frequency network (SFN). For the diversity technique, a delay diversity scheme is adopted. In the delay diversity scheme, a non-delayed signal is transmitted in the first antenna, and delayed versions of the signal are transmitted in each additional antenna. For an SFN environment with multiple transmitters, delay diversity can be executed by controlling the emission times of the transmitters. This SFN delay diversity scheme does not require any hardware changes in either the transmitter or receiver, and perfect backward compatibility can be acquired. To evaluate the performance improvement, laboratory tests are executed with various types of commercial T-DMB receivers as well as a measurement receiver. The improvement in the bit error rate performance is evaluated using a measurement receiver, and an improvement of the threshold of visibility value is evaluated for commercial receivers. Test results show that the T-DMB system can obtain diversity gain using the described technique.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.31-43
• /
• 1996

In this paper, we analyze the delay characteristics of the multimdedia traffic in B-ISDN, and propose a weighted variable-size window estimator considering the QoS characteristics of the media and the variable delay characteristics of the networks, and present a delay estimator-based synchronization protocol for the efficient synchronization in ATM-based B-ISDN. The proposed estimator assigns a high weight value to recent cells arrived in the receiver, and suitably adjusts window size in order to efficiently adapt to delay variation by the prameter to detect the delay variation of the networks. The proposed synchronization protocol estimates end-to-end delay by the weighted variable-size window estimator, and dynamically schedules th evirtual channel of the transmitter to playout multimedia data on time in the receiver. Also, we evaluate the performance of the delay estimator, which is the most importnat functional element in our proposed synchronization protocol, by the simulation and analyze the results of the simulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.433-448
• /
• 2012

A source-synchronous receiver based on a delay-locked loop is presented. It employs a shared global calibration control between channels, yet achieves channel expandability for high aggregate I/O bandwidth. The global calibration control accomplishes skew calibration, equalizer adaptation, and phase lock of all the channels in a calibration period, resulting in the reduced hardware overhead and area of each data lane. In addition, the weight-adjusted dual-interpolating delay cell, which is used in the multiphase DLL, guarantees sufficient phase linearity without using dummy delay cells, while offering a high-frequency operation. The proposed receiver is designed in the 90-nm CMOS technology, and achieves error-free eye openings of more than 0.5 UI across 9-28 inch Nelco4000-6 microstrips at 4-7 Gb/s and more than 0.42 UI at data rates of up to 9 Gb/s. The data lane occupies only $0.152mm^2$ and consumes 69.8 mW, while the rest of the receiver occupies $0.297mm^2$ and consumes 56.0 mW at the 7- Gb/s data-rate and supply voltage of 1.35 V.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.78-81
• /
• 1999

L1 band (1575.42MHz)를 이용한 GPS 수신기의 위치 및 시간 오차는 대략 100 m 와 70 ns 정도로 알려져 있으며, 이 오차의 주원인 중 하나가 위성신호가 대기권을 통과할 때 전리층에서 생기는 전파지연이다. 이러한 전리충의 전파 지연을 정확하게 검출하여 수신기의 위치 오차와 시간 오차를 보정해 주기 위해 사용되는 방식으로서 L1/L2 dual-band를 이용하는 GPS 수신기가 있다. Dual-band GPS 수신기는 한 위성에서 보내는 Ll 밴드 (1575.42MHz) 신호와 L2 밴드 (1227.6MHz) 신호가 각각 전리층을 통과할 때 주파수에 따라 전파 지연 값이 다르다는 것을 이용하여 지연 값을 보정해 주는 원리를 이용한 것이다. 본 논문에서는 Synopsys사의 COSSAP 틀을 이용하여 L1/L2 듀얼 밴드 GPS 수신기의 구조를 상위레벨 시뮬레이션을 통하여 분석하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.41-45
• /
• 2007

Multi-input multi-output (MIMO) system can increase data rate, capacity and bit error rate (BER) performance compare to traditional single antenna system. However MIMO technique is pointed out the problem that has high complexity to design receiver. So a recent trend of research on the MIMO system pays more attention to simplified implementation of receiver structure. In this paper, we propose differential space time block code (STBC) for MIMO system with cyclic delay diversity (CDD). This structure can provide a very close performance to that of the conventional diversity scheme with maximum likelihood (ML) detection without channel estimation block while the receiver structure is highly simplified. Bit error rate (BER) performance of the proposed system is simulated for an AWGN channel by theoretical and simulated approaches. The results of this paper can be applicable to the 4G mobile multimedia communication systems.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.63-67
• /
• 2004

DAM(Delay-And-Multiplier) intercept receiver usually detects the symbol rate of the transmitted DS spread spectrum signal for the feature extraction. It is important for secure communication to reduce the normalized output signal-to-noise ratio that is generated at the DAM intercept receiver as a measure of detectability. In this paper, several kinds of chip waveforms are novelly analyzed for LPI(Low-Probability of Intercept) communication against DAM intercept receiver. Consequently, it is shown that the rectangular chip waveform shows the best LPI performance in the bandwidth of 2/$T_c$TEX>, 4/$T_c$TEX>, and 6/$T_c$TEX>/. Except the rectangular waveform, kaiser chip waveform show better LPI performance than the other waveforms in the bandwidth of 4/$T_c$TEX> and 6/$T_c$TEX>.

• 컴퓨터교육학회논문지
• /
• 제23권3호
• /
• pp.65-70
• /
• 2020

무선 센서 네트워크에서 데이터 패킷은 싱크 노드 방향으로 전송되기 때문에 싱크 노드에 가까운 센서 노드들은 데이터 트래픽이 증가한다. 이러한 문제로 인하여 데이터 패킷은 전송 지연되거나 손실될 수 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 half rotation antenna를 사용하는 방법을 제안한다. half rotation antenna를 사용함으로써 데이터 패킷의 전송 지연을 감소시킬 수 있었다. 또한 BRN(backup receiver node)를 사용하여 센서 노드들의 에너지를 효율적으로 소모할 수 있었고, 네트워크 전체 수명을 증가시키는 효과를 볼 수 있었다. 제안하는 방법은 RI-MAC 프로토콜과 성능 분석을 하였으며, 기존의 RI-MAC 프로토콜에 비해 에너지 소모 및 지연에 더 좋은 성능을 보였다.