• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.835-846
• /
• 1999

In this experiment I have made FM-DS/SS system replacing 170.120 MHz by utilizing FM transmitter and receiver. In the transmitter, the result shows that the modulated FM-DS/SS signal is a typical $(sin \chi/\chi)^2$ spectrum by using the clock(1.329 MHz) of PN divided from FM carrier. In the receiver, SO(Synchronous Oscillator) was applied to despread. Like figure 1, 2, and 4 when I applied SO, which consists of sliding correlator, to synchronous a favorable properties could be obtained in the receiver of FM-DS/SS system. In this paper, I used SO in order to take synchronous in the construction of FM-DS/SS system, and to support it I presented the result of the experiment on synchronous curve and properties of OS.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.201-211
• /
• 2006

The standardization of third Generation Partnership Project(3GPP) has been performed in of order to support interactive multimedia services under mobile environments. In this 3GPP, transmit diversity solutions are applied to increase the available diversity effectively using 2 or more antennas. In this paper, we analyzer the performances on STTD(Space Time Transmit Diversity) technique and its modified techniques such as STTD-OTD, CL-STTD, and 4TX-STTD out of open loop transmit diversities that the standardization of 3GPP has released. We also propose the open loop transmitter and receiver diversities to add the receiver diversity. We analyze and discuss the performance of the proposed techniques and using the Matlab simulation under the flat fading channel environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.163-168
• /
• 2018

We developed W-band transceiver module using open MMIC chip such as receiver single chip and transmitting power amplifier. In order to calculate the noise figure and output power value, we analyzed the W-band transition loss from the antenna to MMIC connection and constructed the 12 channel receiver and the 5 channel transmitter. And compared with the results of the measurement. As a result, the output power of the transmitter was similar to the analytical results and the measured results at room temperature and environmental conditions. The noise figure of the receiver was also similar, but some channels showed error of about 3 dB due to manufacturing error.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1082-1087
• /
• 2019

In this study, ECG signal amplifier, wireless transmitter/receiver circuit, signal processing filter circuit and A/D converter circuit design required for the development of small sized ECG module for wireless transmission/ reception were performed. In order to verify the performance of ECG sensors, the measurement was performed from 1 m to 3 m to measure the signal noise ratio according to the gateway distance. Experimental results showed that the signal noise ratio at 2 m distance was 17.18 dB on average, which fulfilled the requirements for commercialization. The experimental results obtained in this study are expected to contribute to the low cost, high efficiency mobile health field where remote monitoring diagnosis can be applied to small biometric devices for chronic disease management.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.241-247
• /
• 2022

Ad hoc network is self-organized network powered by battery. The reliability of virtual user identification and channel security are reduced when SNR is low due to limited user energy. In order to solve this problem, a joint virtual user identification and channel security en/decoding method is proposed in this paper. Transmitter-receiver-based virtual user identification code is generated by executing XOR operation between orthogonal address code of transmitter and pseudo random address code of receiver and encrypted by channel security code to acquire orthogonal random security sequence so as to improve channel security. In order to spread spectrum as well as improve transmission efficiency, data packet is divided into 6-bit symbols, each symbol is mapped with an orthogonal random security sequence. Subspace-based method is adopted by receiver to process received signal firstly, and then a judgment model is established to identify virtual users according to the previous processing results. Simulation results indicate that the proposed method obtains 1.6dB E_b/N₀ gains compared with reference methods when miss alarm rate reaches 10^-3.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.581-594
• /
• 2024

In this study, a planar printed circuit board (PCB) coil with FR4 substrate was designed and simulated using the finite element method, and the results were analyzed in the frequency domain. This coil can be used in wireless power transfer (WPT) as a transmitter or receiver, eliminating wires. It can also be used as the receiver in radio frequency energy-harvesting (RF-EH) systems by optimizing the planar PCB coil to convert radio-wave energy into electricity, and it can be employed as an excitation (transmitter) or receiver coil in nuclear magnetic resonance (NMR) spectroscopy. This PCB coil can replace the conventional coil, yielding a reduced occupied volume, a fine-tuned design, reduced weight, and increased efficiency. Based on the calculated gain, power, and electromagnetic and electric field results, this planar PCB coil can be implemented in WPT, NMR spectroscopy, and RF-EH devices with minor changes. In applications such as NMR spectroscopy, it can be used as a transceiver planar PCB coil. In this design, at frequencies of 915 MHz and 40 MHz with 5 mm between coils, we received powers of 287.3 μW and 480 μW, respectively, which are suitable for an NMR coil or RF-EH system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.9-14
• /
• 2009

In this paper, we proposed spreading code slicing technique for efficient transmitter detection in AT-DMB system with single frequency network. At the transmitter, the spreading code for transmitter identification inserted using slicing technique on forehead of null symbol and then transmitted. In this point, it requires high correlation characteristic spreading code. At the receiver, peak to peak value calculated by correlation process before signal demodulation. The transmitter information by proposed technique is employed to implement the single frequency network (SFN) which is proposed for solving a frequency inefficiency problem of the MFN. The results of the paper can be applied to wireless multimedia digital broadcasting system.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.309-312
• /
• 2001

In this paper, we proposed a system for bit stream wireless communication using audio/video infrared transceiver and implemented a circuit. The proposed transmitter system converted bit stream into analog signal format that is similar to NTSC. Then the analog signal can be transmitted by infrared spatial coupler for A/V signals. And the receiver system recover the bit stream by inverse process of transmitter.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.327-332
• /
• 2001

This paper proposes the system to describe the data transmission methods using the simply frequency transmission methods between a railway track and the train. This system can control the railway signals through the ABS or ATS system located in the train and stations, having the frequency about 433.92 MHz. It shows the advanced system to send a lot of data through the microprocessor installed in a transmitter and transmitter-receiver at the train and railway.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.93-96
• /
• 2008

A transmitter (TX) leakage cancellation scheme using a Micro Controller Unit (MCU) is introduced. This paper highlights an adaptive anti-leakage signal generation via an MCU, which plays the key role in reducing the TX leakage signal level. High transmitter-to-receiver (TX-to-RX) isolation is verified with measurement results.