• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.423-431
• /
• 2002

An experimental study is conducted to investigate the effect of two-frequency forcing on turbulent flow behind a backward-facing step at the Reynolds number of 27000 based on the step height. The forcing is provided from a thin slit located at the edge of the backward-facing step to increase mixing behind the backward-facing step and consequently to reduce the reattachment length. With single frequency forcing, the minimum reattachment length is obtained at the non-dimensional forcing frequency (F) of St$\_$h/ = 0.29. With two-frequency forcing, a subharmonic frequency (F/2) or biharmonic frequency (2F) is combined with the fundamental frequency (F), i.e. (F, F/2) or (F, 2F) forcing is applied. In the case of (F, F/2) forcing, the reattachment length is not much sensitive to the phase difference between F and F/2. However, the reattachment length significantly depends on the phase difference between F and 2F in the case of (F, 2F) forcing. At a certain range of the phase difference, the reattachment length becomes smaller than that of the single frequency forcing.

• 대한소아치과학회지
• /
• 제49권1호
• /
• pp.104-112
• /
• 2022

이 연구의 목적은 생리적 조건에서 파절편 재부착 시 레진재료 및 유지형태에 따른 파절편의 파절저항성을 분석하는 것이다. 발거된 64개의 전치부 치아에 사선 방향의 단순치관파절을 재현하였다. 복합레진 재료에 따라서는 유동성 복합레진 및 응축형 복합레진을 이용하여 재부착을 실시하였다. 유지형태로는 단순 재부착, 1.0 mm × 1.0 mm 순측 chamfer bevel, 1.0 mm × 1.0 mm 설측 chamfer bevel 및 1.0 mm × 1.0 mm circumferential chamfer bevel을 부여한 후 재부착을 실시하였다. 만능재료시험기를 이용하여 재부착된 치아의 설측면에 정상 아동의 절치간각인 125°로 부하를 가하였다. 저작압 조건에서는 유동성 레진과 응축형 레진군 모두 설측 chamfer군의 파절저항강도는 28.28 ± 7.41 MPa과 27.54 ± 4.45 MPa로 단순 재부착군의 파절저항성강도인 17.21 ± 5.87 MPa과 20.10 ± 6.00 MPa보다 유의하게 더 높았다. 생리적인 저작압과 유사한 설측 방향의 힘을 고려 시 파절편 재부착치의 파절편 유지력은 단순 재부착술보다 설측 chamfer 유지형태를 형성하였을 때 유의하게 더 큰 유지력을 나타내었다. 이에 임상가는 파절편 재부착술 시 저작압에 대한 파절 저항성을 향상시키기 위해 설측 chamfer 유지형태의 설계를 고려할 수 있을 것이다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.70-75
• /
• 2004

The effect of electric fields on the stability of non-premixed laminar lifted flame in coflow jets has been investigated by applying high voltage alternative current (AC) to the nozzle of propane fuel. The stable lifted flame which exist in far field of jets, the liftoff height was not effected by applied voltage. This implies that the cold jet between the nozzle and flame base can be analyzed with the previous cold jet theory. Flame liftoff and reattachment velocities were also measured as function of applied voltage and frequency. The fuel jet velocity at flame liftoff and reattachment increased with increasing voltage, implying that the range of flame srability can be extended with the AC charging. However the liftoff velocity increased with frequency of AC charging on nozzle, whereas the reattachment velocity decreases with frequency. The liftoff and reattachment velocities were correlated linearly with voltage considering the effects of frequency.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2083-2099
• /
• 1991

본 연구에서는 다른 실험 조건은 일정하게 유지하면서 아래 벽면의 표면조도 를 체계적으로 변화시켜 표면조도가 후향계단 뒤의 재부착 흐름 및 재발달경계층에 미 치는 영향을 조사하고자 하며 구체적인 내응은 다음과 같다. (1) 표면조도가 재부착 길이와 재발달경계층에 미치는 영향의 조사. (2) 표면조도가 평균속도와 난류량 분포 에 미치는 영향의 조사. (3) 여러 종류 표면조도 변화에 따른 재부착길이와 재발달 경 계층 회복에 미치는 영향과 결과의 상호 비교.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1510-1520
• /
• 1996

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purpose of the present study is to investigate the effect of the separating streamline curvature on the reattachment length and to understand the structure of recirculating flows. Local mean and fluctuating velocity components were measured in the separating and reattaching axisymmetric region of turbulent boundary layer on the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. The study demonstrates that the reattachment length increases with increasing separating streamline curvature. It is also observed that the reverse flow velocity and turbulent kinetic energy increase with an increase in the separating streamline curvature. In addition, the behavior of maximum turbulent stresses show that the effect of separating streamline curvature is larger in the region of recirculating zone(X/H<2) than in the region of reattachment point.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.475-483
• /
• 1997

Fracture of the crown in a permanent incisor is relatively common. When it occurs with pulp exposure, it presents both restorative and endodontic problems. In the restoration of a fractured incisor, reattachment of the original fragment or restoration with a composite resin is preferred over a temporary crown. If fractured fragment is intact, the tooth can be restored with reattachment of the fragment. An exposed pulp in a young crown-fractured incisor is usually treated with either pulp capping or pulpotomy depending on the size of an exposure and time elapsed since injury. However, in teeth showing vital and/or hyperplastic pulp tissue at the exposure, only superficial layers of the pulp and surrounding dentin should be removed : i.e. partial pulpotomy can be performed in immature as well as mature teeth. This paper reports 2 cases of crown-fractured permanent incisors with pulp exposure that had been treated by reattachment of original fragment followed by partial pulpotomy or partial pulpectomy. The following results are obtained. ; 1. Fragment reattachment is an acceptable semi-permanent restoration of crown fractured young permanent incisor. 2. Partial pulpotomy is recommended as the treatment of choice in crown-fractured permanent teeth with pulp exposure.

• 물과 미래
• /
• 제27권3호
• /
• pp.123-134
• /
• 1994

돌출방류수로에 의하여 동일한 수심의 개수로에 방류되는 부력방류에 의한 연안귀환이 수리실험에 의하여 해석되었다. 부력방류는 온수를 방류하여 발생된다. 돌출방류로 인하여 부력류 하류에 형성되는 재순환영역의 크기는 비돌출방류에서 보다 증가하는 경향을 갖으나 황온도분포는 균일하고 횡단면 최대온도는 감소를 나타낸다. 높은 부력흐름율과는 반대로 낮은 부력흐름율 조건에서 단면평균온도 또는 열흐름율은 돌출길이의 영향이 무시할 정도이다. 비돌출의 경우에는 연안귀환에 유속비가 지배적인 매개변수이었으나 돌출방류의 경우에는 유속비와 후르드수가 다같이 지배적인 인자로 나타났다.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.715-721
• /
• 2003

상악 영구전치의 외상은 소아와 청소년기에 많이 일어난다. 그 중 치관의 파절은 18세 이하의 외상성 손상의 1/4에서 나타난다. 이러한 치관파절시 심미적 기능적으로 만족시킬 수 있는 수복을 하려는 노력이 계속되어 왔다. 파절편을 이용한 수복은 이러한 심미적 기능적인 조건을 만족시킬 수 있는 방법이다. 본 증례들은 전남대학교병원 소아치과에 상악중절치의 외상을 주소로 내원한 아동들의 치험례이다. 증례 1은 미성숙영구치치근을 가지는 만 7세의 여아로 침상출혈에 따른 수산화칼슘을 이용한 직접치수복조후 파절편을 부착한 증례이며, 증례 2는 함입과 치관파절로 인해 치수노출을 보인 만 10세 남아로 resin-wire splint 후 치수치료 하고 파절편을 부착하였고, 증례 3은 파절선이 생리적 폭경을 침범한 8세 여아로 별다른 처치 없이 파절편 부착을 시행하였다. 이상의 증례들을 통하여 치아 파절편 부착을 성공적으로 시행하였으며, 심미적으로 양호한 결과를 얻었다.