• 지역연구
• /
• 제6권1호
• /
• pp.39-55
• /
• 1990

The principal measure of housing demand is income and the preferences expressed by households through their respective indifference curves. In this context, housing essentially becomes a derived demand, i.e., the household consumes land and a location (or distance-in time and money costs), according to its relative preferences for space, accessibility, and all other nonhousing goods. This paper attempts to deal with both aspects of housing (apartment) demand and household mobility in the Seoul Metropolitan Areas. Housing services will be measured using hedonic regression technique. From observations on the market prices of dwelling units and on the underlying characteristics of housing, one can estimte the relationships between the two empirically. In predicting the probability of the future moves into new towns in the Seoul Metropolitan areas, the best predictors of the future moves into new best predictors are found to be the degree of satisfaction not only with the current residence as a whole, but with some of the major amenities, accessibility and child education. The reasons for moving into new towns are diverse depending on the households' current situation; the most frequently cited is "improvement of housing conditions," followed by "improvement of living environment," "asset improvement" and "home ownership". It appears that people move houses because of a dissatisfaction with their current housing status, relative their income or needs, or a desire to improve their housing and neighborhood amenities, or both. On the other hand, it is clear that the development of new towns in the Seoul Metropolitan Areas should be based on the analysis of housing demand and the pattern of household mobility in Seoul housing market.sehold mobility in Seoul housing market.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.566-571
• /
• 2006

A sequencing batch biofilm reactor (SBBR) operated with a cycle of anaerobic - aerobic - anoxic - aerobic has been evaluated for the nutrient removal characteristics. The sponge-like moving media was filled to about 10% of reactor volume. The sewage was the major substrate while external synthetic carbon substrate was added to the anoxic stage to enhance the nitrogen removal. The operational results indicated that maximum T-N and T-P removal efficiencies were 97% and 94%, respectively were achieved, while COD removal of 92%. The observations of significant nitrogen removal in the first aerobic stage indicated that nitrogen removal behaviour in this SBBR was different to conventional SBR. Although the reasons for aerobic nitrogen removal has speculated to either simultaneous nitrification and denitrification or anoxic denitrification inside of the media, further researches are required to confirm the observation. The specific oxygen uptake rate (SOUR) test with biofilm and suspended growth sludge indicated that biofilm in SBBR played a major role to remove substrates.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.9-15
• /
• 2013

Roll-to-roll printing technology has lately become a subject of special interests in the field of printed electronics. Since this technology has the advantage that continuous and mass production is possible. And for high precision register control is required in multi-layer printing to produce the electronic devices, this is one of the most important technologies in roll-to-roll printing technology. Register error could be generated by various reasons like eccentricity of roll and thermal deformation due to temperature variation in drying section. In this study, the effect of tension variation on the register was analyzed. The results of these analyses show that it is essential to consider the tension disturbance which is generated by the change of temperature in drying section, and conventional register model has limitation to estimate the register error. In order to overcome the limitation of the register model, advanced register model based on the SI process was developed. Also, the performance of the developed model was verified experimentally.

• 한국병원경영학회지
• /
• 제14권4호
• /
• pp.149-162
• /
• 2009

The purpose of this study is to design strategic hospital service based on each hospital's features. For this study, an assessment was conducted by 398 in-patents of one university hospital located in Seoul. The self-questionnaires, which were investigated from Oct. 15th to 29th in 2008, compared central reception desk with ward reception desk in satisfaction and re-use rate of patients. The major results of this study are as follow. First, according to each reception desk user, they have different satisfaction of it. As for the staff kindness, admission procedure, discharge procedure and manner of staff, those made patients be gratified as well. Second, when it comes to the intention of re-use, there were no significant features between them. Only convenience in admission and discharge procedure, however, was an attractive factor for the recommendation. Third, this study found out the reasons for higher re-use rate of central reception desk users. Regarding service, they were contented with the time for test and treatment. As for the hospital service, they would like to re-use this hospital because of convenient steps of paying interim fee and getting certificates. Forth, this study found out the reasons for higher re-use rate of ward reception desk users. As a point of hospital service view, they responded that respected privacy, hospital facility and general service were good for staying. As for the manner of staff, they mentioned nurses and staff in charge and whole staff members were kind. When it comes to the procedures of patient management, steps of discharge and paying interim fee were convenience. In conclusion, the results of this study suggest that providing a ward reception desk service can boost the satisfaction and re-use rate of in-patients. Furthermore, this strategic management method would be good for not only cutting the moving line but also efficient in-patient care system. These results can be used for the strategic hospital marketing field, as well. Even though this study has a limitation of the targeted populations which were only in a ward reception desk running hospital, it can say that having competitiveness in satisfaction of hospital service is good for promoting and differencing each hospital. Consequently, whole general management system would be adjusted first for differencing each hospital; however, this sort of additional factor should be concerned as well. I expect that this study would give meaningful data for designing strategic and differencing marketing method to lots of hospitals.

• 한국보건간호학회지
• /
• 제10권2호
• /
• pp.15-36
• /
• 1996

It is clear that the women's participation in social activity is dramatically increased in civilian field as well as military profession. Because of the characteristics of military nursing service, there are many difficulties. Frequent move, medical insurance, baby care. and the education are typical forms of difficulties for nurse officers in the military. The purpose of this research is to contribute to the perfect execution of nursing service. guarantee the active attitude for research and improve the combat strength by solving those private and economic problems. The method of research was analysis of question survey and the review of related literatures. The subject of research was 300 active nurse officers who work at the Army Hospitals. The survey was conducted 14 days from Oct 15 to Oct 28. The collected data was processed by computer using SPSS(Statistical Package of Social Science). Frequencies and percentages were used to examine the demographic characteristics of subject, and T-test was also used in the case of necessity. The result showed as follows; As the general characteristics of subject group; 28.7 years of average age, 73.6 months of service period, 63.4% of married. In regard of specialty; General 57.7%. Intensive Care 12.7% and Psychiatries 8.8%. The dissatisfactory factors about military welfare system were the difficulties in children education (36.9%). disadvantages on the civil medical insurance system (27.3%), and little chance of self education and development (21.5%). The problems in performing their duties were shown as dwelling instability due to frequent move (67.7%), and bring up children (14.2%). The reasons for resigning their job were shown as the instability of living status (64.2%), bring up children (18.8%) and dissatisfaction to the service (11.2%). The residential status was shown that military offered houses (45.2%), rental houses (29.3%) and own houses(14.64). The average numbers of moving residencies were; 3-4 time(34.6%), less than 2 times(33.1%), and 5-7 times(21.5%). Higher than 94.7% of the subject group spent more than 50.000 Won. In regard of education, they wanted to attend graduate school with their own expense(26.2%), computer science(20%) and Office Job Training(20%). The ways of taking care of children were mother-in-low(49.6%), mother(14.6%), and others(25%). The average expenditure per month for children were 20-30 hundred Won(44.2%), 10-20 hundred Won(25%) and 30-40 hundred Won(22.3%). The places of children care selected were public or occupational care center(56.2%), religious organization(20.8%), and other center managed by social organizations(10.4%). The result of survey for general welfare of nurse officers are as follows; By and large they seem to be satisfied with their job. however. there are some dissatisfactory factors. They are children care facilties, promotion. income. welfare facilities. disadvantage in medical insurance and civil hospitals. house purchase. unfair chances in specialty training. influence on promotion by educational status. and insufficient role for their children and husbands. As conclusion. the recommendations for improving nursing service are as follows; 1. Children care center managed by occupation 2. Dormitory system for children by military personnel 3. Equal opportunities in education according to ability 4. Reasonable moving price according to the distance and scope of family and extra allowance

• 한국해양환경ㆍ에너지학회지
• /
• 제12권3호
• /
• pp.143-150
• /
• 2009

선박의 주기관이나 발전기관 등 디젤기관에서 사용하는 연료유는 원유를 정제해서 사용하고 있다. 석유화학공업에서 원유로부터 양질의 고급 휘발유를 많이 생산하기 위하여 촉매를 사용하는 유동접촉분해(FCC) 방법을 채택하여 원유를 분리하고 있다. 유동접촉분해 시 촉매의 주성분은 Si와 Al이며, 그 외에 Fe, Zn, Ti 등의 기본금속과 알칼리 금속 및 Ce, Nd, Ni, V 등의 희유금속이 함유되어 있다. 만일 선박에 사용되는 연료유에 이러한 성분의 촉매가 많이 혼입되어 Al, Si, Ni, V이나 Fe 등의 성분이 과다하게 되면 기관 부속품 마모가 아주 심하게 되고, 기관전체를 사용하지 못하게 되어 대형 해양 선박사고가 발생 할 수 있다. 다시 말해, 이런 성분이 많이 함유된 연료유를 기관에 사용하는 경우 연료펌프, 연료분사밸브, 실린더라이너, 피스톤링의 마모가 심하게 발생하게 된다. 따라서 이러한 사고를 예방하기 위하여 사고 발생현황에 대한 정확한 원인을 규명하고 밝히는 것이 중요하다. 아울러 그 사고의 원인이 자연적인 마모, 경년변화인가 또는 외적인 요인에 의한 사고인가에 따라 보험 보상 대상여부가 판명될 수 있어, 연료유로 인한 사고 원인규명은 아주 중요한 업무이다. 본 논문에서는 연료유 관련 사고가 발생한 선박을 대상으로 사고유형, 사고원인 및 예방법에 대한 검토를 하고 향후 선박의 디젤엔진에서 저질연료유 사용에 따른 문제점을 개선하도록 제시하고자 한다.

• 한국공간정보시스템학회 논문지
• /
• 제10권4호
• /
• pp.47-58
• /
• 2008

최근 유비쿼터스 컴퓨팅 기술의 발전과 함께 센서 및 RFID에 관련한 정보 인식, 위치 측위와 같은 다양한 유비쿼터스 영역에 대한 관심과 연구가 증대되고 있다. 특히, RFID 태그를 이용해 이동 객체의 위치 및 상태 정보를 제공하는 다양한 RTLS(Real-Time Locating Systems)가 개발됨에 따라 RTLS에서의 데이타 호환성과 상호 운용성을 위한 표준 명세가 필요하게 되었다. 이에, ISO/IEC에서는 RTLS의 데이타 호환성과 상호 운용성을 위해 RTLS 표준 명세를 제시하였다. 본 논문에서는 이동 객체의 데이타 스트림에 대한 효율적인 관리와 검색을 위해 공간 DSMS(Data Stream Management System)기반 RTLS를 설계 및 구현하였다. 공간 DSMS는 Stanford 대학교에서 개발한 STREAM(STanford stREam datA Manager)을 다양한 공간 연산이 가능하도록 확장한 시스템이다. 공간 DSMS 기반 RTLS는 서버와 클라이언트간의 상호 운용성을 위하여 SOAP(Simple Object Access Protocol) 메시지를 사용하며, 클라이언트의 SOAP 메시지를 공간 DSMS의 CQL(Continuous Query Language)로 변환한다. 마지막으로, 공간 DSMS 기반 RTLS를 사원 위치 관리 서비스에 적용해 봄으로써 시스템의 효용성을 입증하였다.

• 농업과학연구
• /
• 제18권1호
• /
• pp.80-92
• /
• 1991

Since the first five-year economic plan starting in 1962, Korea has pursued the policy of economic growth emphasing on the export-oriented industrialization. As a result of export-oriented industrialization, national economy, as a whole, has leveled up. But growth gap between rural and urban area became widened due to declining agricultural sector. Therefore, at this time, development policy for the agriculture should be changed into the broader plan including the welfare of rural residents in order to improve their living conditions. The results of this study are summarized as follows ; 1. The results of survey shows that only 15.5% of rural residents satisfy their rural lives and that 62.8% of residents want to leave their town. Difficulty of educating their children in rural area is found to be major reasons for moving out 2. The results of surveying the demand for rural development by rural residents are figured as follows ; (1) Industrial-economic development - Agricultural development : 38.4% - Rural industrialization development : 23.4% - Farm machinization : 162% (2) Social development for rural residents - Improvement of rural welfare : 33.4% - Expansion rural organization for development : 25.8% - Improvement of educational circumstances : 20.1% (3) Living conditions - Amelioration of community and housing facilities : 55.1% - Disposal facilities for trash : 20.5% As the surveying results show, it can be concluded that rural residential area development project must be enforced to meet demand for the development for rural residents.

• Structural Engineering and Mechanics
• /
• 제67권6호
• /
• pp.643-658
• /
• 2018

In this paper, we introduce a new framework for running the finite element (FE) packages inside an online Loop together with MATLAB. Contrary to the Hardware-in-the-Loop techniques (HiL), in the proposed Software-in-the-Loop framework (SiL), the FE package represents a simulation platform replicating the real system which can be out of access due to several strategic reasons, e.g., costs and accessibility. Practically, SiL for sophisticated structural design and multi-physical simulations provides a platform for preliminary tests before prototyping and mass production. This feature may reduce the new product's costs significantly and may add several flexibilities in implementing different instruments with the goal of shortlisting the most cost-effective ones before moving to real-time experiments for the civil and mechanical systems. The proposed SiL interconnection is not limited to ABAQUS as long as the host FE package is capable of executing user-defined commands in FORTRAN language. The focal point of this research is on using the compiled FORTRAN subroutine as a messenger between ABAQUS/CAE kernel and MATLAB Engine. In order to show the generality of the proposed scheme, the limitations of the available SiL schemes in the literature are addressed in this paper. Additionally, all technical details for establishing the connection between FEM and MATLAB are provided for the interested reader. Finally, two numerical sub-problems are defined for offline and online post-processing, i.e., offline optimization and closed-loop system performance analysis in control theory.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.140-152
• /
• 2021

During the shift from gasoline vehicles to electric ones, auto parts manufacturing companies have realized the importance of improvement in the manufacturing process that does not require any layout changes nor extra investments, while maintaining their current production rate. Due to these reasons, for the auto part manufacturing company, I-company, this study has developed the simulation model of the PUSH system to conduct a process analysis in terms of production rate, WIP level, and logistics work's utilization rate. In addition, this study compares the PUSH system with other three manufacturing systems -KANBAN, DBR, and CONWIP- to compare the performance of these production systems, while satisfying the company's target production rate. With respect to lead-time, the simulation results show that the improvement of 77.90% for the KANBAN system, 40.39% for the CONWIP system, and 69.81% for the DBR system compared to the PUSH system. In addition, with respect to WIP level, the experimental results demonstrate that the improvement of 77.91% for the KANBAN system, 40.41% for the CONWIP system, and 69.82% for the DBR system compared to the PUSH system. Since the KANBAN system has the largest impacts on the reduction of the lead-time and WIP level compared to other production systems, this study recommends the KANBAN system as the proper manufacturing system of the target company. This study also shows that the proper size of moving units is four and the priority allocation of bottleneck process methods improves the target company's WIP and lead-time. Based on the results of this study, the adoption of the KANBAN system will significantly improve the production process of the target company in terms of lead-time and WIP level.