• 제목/요약/키워드: Reasonable Path

검색결과 150건 처리시간 0.025초

기본소득의 이상적 모형과 이행경로 (Feasible Paths to Realizing Korean Basic Income)

  • 김교성;백승호;서정희;이승윤
    • 한국사회복지학
    • /
    • 제69권3호
    • /
    • pp.289-315
    • /
    • 2017
  • 전 세계적으로 기본소득 논의가 부상하면서 한국에서도 기본소득 논의가 확장되었다. 논의의 확장은 기본소득에 대한 다양한 고민들과 격렬한 찬반논쟁으로 이어졌다. 기본소득제의 도입을 고민하기 위해서는 한국사회에서 기본소득이 포함된 미래 복지국가의 이상적인 모습을 설계하는 작업이 선행되어야 한다. 본 논문에서는 기본소득(과 복지국가)의 이상적 모형을 설계하고 단계적 이행경로를 제시하였다. 이를 위해 먼저 기본소득의 주요한 속성을 논하고 이를 바탕으로 퍼지셋 이념형 분석을 실시하였다. 이를 통해 기본소득과 복지국가의 이상적인 모형을 설계하고, 이상적인 복지국가 실현을 위한 단계적 이행경로를 제시하였다. 이는 완전 기본소득을 지향한다고 할 때 우리 사회가 선택할 수 있는 실현가능하고 합리적인 선택지에 대한 실천적 고민이라 하겠다.

  • PDF

새로운 2상 8/6 SRM의 구조적 특성에 관한 비교 연구 (A Comparative Study on the Structural Characteristics of the Novel Two-Phase 8/6 Switched Reluctance Machine)

  • 이치우;황홍식;오석규
    • 전기학회논문지
    • /
    • 제66권2호
    • /
    • pp.315-322
    • /
    • 2017
  • This study presents a novel two­phase eight stator poles and six rotor poles (8/6) switched reluctance machine (SRM) that can compensate for the vibration and noise problems of two­phase 6/3 SRM and compare the characteristics of two SRMs. In the case of two­phase 6/3 SRM, the short flux path and the flux direction inside the stator are not reversed, so they have high efficiency characteristics. However, the use of three rotor poles causes problems of vibration and noise because the radial force applied to the rotor poles is not balance. The proposed two­phase 8/6 SRM has advantages of 6/3 SRM such as the flux­reversal­free stator and it can improve vibration and noise by using six rotor poles due to balanced radial force acting on the rotor poles. In order to make a reasonable comparison between two SRMs, the electromagnetic field structure of 8/6 SRM is designed to have equivalent torque characteristic to 6/3 SRM and then the copper loss and core loss are compared and analyzed. Finally, we compare the effieicney of two SRMs using finite element analysis and compare the distribution of radial force acting on the rotor poles based on Maxwell's stress method.

대중교통 지선노선 선정기법에 관한 연구 (A Study on the Feeder Transit Route Choice Technique)

  • 배기목
    • 한국항해항만학회지
    • /
    • 제27권4호
    • /
    • pp.479-484
    • /
    • 2003
  • 지선버스 노선선정의 경우, 전체 네트워크로서의 노선선정 보다는 지하철 역 등의 특정 기ㆍ종점과의 연계차원에서 단일 노선으로 취급하여 노선선정을 행함이 바람직하다. 본 연구에서는 이와 같은 관점 하에 정류장 대기시간, 환승시간 등은 고려하지 않고, 일정 기ㆍ종점을 연결하는 지선노선 선정을 위한 간편 기법을 구축하였다. 검토대상 도로망 한정, 허용노선장에 의한 후보노선의 열거, 노선평가치에 의한 최종 노선의 선정 등의 3가지 단계를 통해 지선기능으로서의 마을버스 노선을 선정하는 기법을 구축하였다.

Comparative Study on Various Ductile Fracture Models for Marine Structural Steel EH36

  • Park, Sung-Ju;Lee, Kangsu;Cerik, Burak Can;Choung, Joonmo
    • 한국해양공학회지
    • /
    • 제33권3호
    • /
    • pp.259-271
    • /
    • 2019
  • It is important to obtain reasonable predictions of the extent of the damage during maritime accidents such as ship collisions and groundings. Many fracture models based on different mechanical backgrounds have been proposed and can be used to estimate the extent of damage involving ductile fracture. The goal of this study was to compare the damage extents provided by some selected fracture models. Instead of performing a new series of material constant calibration tests, the fracture test results for the ship building steel EH36 obtained by Park et al. (2019) were used which included specimens with different geometries such as central hole, pure shear, and notched tensile specimens. The test results were compared with seven ductile fracture surfaces: Johnson-Cook, Cockcroft-Latham-Oh, Bai-Wierzbicki, Modified Mohr-Coulomb, Lou-Huh, Maximum shear stress, and Hosford-Coulomb. The linear damage accumulation law was applied to consider the effect of the loading path on each fracture surface. The Swift-Voce combined constitutive model was used to accurately define the flow stress in a large strain region. The reliability of these simulations was verified by the good agreement between the axial tension force elongation relations captured from the tests and simulations without fracture assignment. The material constants corresponding to each fracture surface were calibrated using an optimization technique with the minimized object function of the residual sum of errors between the simulated and predicted stress triaxiality and load angle parameter values to fracture initiation. The reliabilities of the calibrated material constants of B-W, MMC, L-H, and HC were the best, whereas there was a high residual sum of errors in the case of the MMS, C-L-O, and J-C models. The most accurate fracture predictions for the fracture specimens were made by the B-W, MMC, L-H, and HC models.

Calibration of cylindrical NaI(Tl) gamma-ray detector intended for truncated conical radioactive source

  • Badawi, Mohamed S.;Thabet, Abouzeid A.
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1421-1430
    • /
    • 2022
  • The computation of the solid angle and the detector efficiency is considering to be one of the most important factors during the measuring process for the radioactivity, especially the cylindrical γ-ray NaI(Tl) detectors nowadays have applications in several fields such as industry, hazardous for health, the gamma-ray radiation detectors grow to be the main essential instruments in radiation protection sector. In the present work, a generic numerical simulation method (NSM) for calculating the efficiency of the γ-ray spectrometry setup is established. The formulas are suitable for any type of source-to-detector shape and can be valuable to determine the full-energy peak and the total efficiencies and P/T ratio of cylindrical γ-ray NaI(Tl) detector setup concerning the truncated conical radioactive source. This methodology is based on estimate the path length of γ-ray radiation inside the detector active medium, inside the source itself, and the self-attenuation correction factors, which typically use to correct the sample attenuation of the original geometry source. The calculations can be completed in general by using extra reasonable and complicate analytical and numerical techniques than the standard models; especially the effective solid angle, and the detector efficiency have to be calculated in case of the truncated conical radioactive source studied condition. Moreover, the (NSM) can be used for the straight calculations of the γ-ray detector efficiency after the computation of improvement that need in the case of γ-γ coincidence summing (CS). The (NSM) confirmation of the development created by the efficiency transfer method has been achieved by comparing the results of the measuring truncated conical radioactive source with certified nuclide activities with the γ-ray NaI(Tl) detector, and a good agreement was obtained after corrections of (CS). The methodology can be unlimited to find the theoretical efficiencies and modifications equivalent to any geometry by essential sufficiently the physical selective considered situation.

사행하천에서 오염물질의 2차원 거동특성 해석 (Analysis of Two-Dimensional Pollutant Transport in Meandering Streams)

  • 오정선;서일원;김영한
    • 한국수자원학회논문집
    • /
    • 제37권12호
    • /
    • pp.979-991
    • /
    • 2004
  • 본 연구에서는 사행하는 자연하천에 유입된 오염물질의 2차원 확산 특성을 모의하기 위하여 2차원 수심적분 모형인 RMA2와 RMA4를 사용하였다. 먼저 2차원 동수역학적인 모형인 RMA2를 사용하여 흐름장을 모의한 후 이 결과를 2차원 수질모형인 RMA4에 입력하여 농도장을 모의하였다. 수치모형을 S자형 사행수로에서 측정한 흐름 및 추적자 농도자료를 이용하여 검증한 결과, RMA4 모형은 최대유속선이 만곡의 내측에 치우쳐 나타나는 현상을 잘 모의하고 있었으며, RMA4 모형은 오염운의 전반적인 확산 특성과 분리 현상을 적절하게 모의하고 있었다. 수치모형을 실제 하천에 적용하여 현장 실험 결과를 비교한 결과, RMA2 모형은 전체적인 흐름 특성 및 만곡의 외측 제방으로 치우치는 최대유속선의 경향 등을 잘 모의하였으며, RMA4모형은 오염운이 최대유속선을 따라 이동하는 경향 등을 적절하게 재현하는 것으로 밝혀졌다. 본 연구에서 분산계수는 실측 농도분포로부터 계산한 값을 미세 조정하여 사용하였으며, 이는 기존의 추정식에 의한 추정치와도 잘 부합하는 것으로 밝혀졌다.

비선형 파괴역학에 의한 콘크리트의 파괴거동과 균열성장에 관한 연구 (Fracture Behavior and Crack Growth of Concrete by The Nonlinear Fracture Mechanics)

  • 배주성;나의균
    • 콘크리트학회지
    • /
    • 제2권2호
    • /
    • pp.81-92
    • /
    • 1990
  • 콘크리트는 혼합물로서 비균질성, 이방성 및 비선형성 재료이기 때문에 그의 파괴해석에 있어서 재래의 강도 개념보다 파괴역학 개념을 적용하여 콘크리트의 파괴인성을 도입하여 평가하는 것이 보다 합리적이라 할 수 있다. 지금까지 콘크리트에 적용되어 온 파괴역학 개념은 두가지로 대별될 수 있는데 하나는 선형탄성파괴역학 개념이고 다른 하나는 비선형파괴역학 개념이다. 그러너 전자를 콘크리트에 적용하는데는 문제점과 불합리성이 지적되어 왔다. 본 연구에서는 비선형파괴역학에서 많이 이용되어온 J-적분법과 COD법을 도입하여 굵은골재의 최대치수와 노치깊이의 변화가 콘크리트의 파괴거동, 파괴에너지 및 균열성장에 미치는 영향, 균열개구변위와 파괴에너지의 관계 등을 고찰하기 위하여 콘크리트 작사각형 보를 제작하여 3점 휨 파괴실험을 수행하였다. 그 결과 굵은골재의 최대치수와 노치깊이가 증가할수록 하중-치 짐거동의 비선형성이 더욱 두드러졌고, 굵은골재 최대치수의 증가는 콘크리트의 연성을 증가시켜 보다 안정된 파괴를 유도하였으며, 균열전파경로는 굵은골재의 최대치수가 증가할수록 점점 더 직선에서 벗어나 불규칙적이었으나 노치깊이의 변화에는 거의 영향을 받지 않았다. 또한 파괴에너지는 굵은골재의 최대치수가 증가하고 노치깊이가 감소할수록 증가하였으나, 균열개구변위는 노치깊이가 증가할수록 감소하였으며 굵은골재의 최대치수의 변화에는 거의 영향을 받지 않았다.

중국 연변 조양하 유역의 국부경사와 배수면적의 관계를 이용한 토사유실 우심지역 추출 (Identification of vulnerable region susceptible to soil losses by using the relationship between local slope and drainage area in Choyang creek basin, Yanbian China)

  • 김주철;최봉학;정관수
    • 한국수자원학회논문집
    • /
    • 제51권3호
    • /
    • pp.235-246
    • /
    • 2018
  • 본 연구의 주목적은 조양하 유역의 유출응집구조와 에너지소비 양상을 멱함수 법칙분포의 틀 내에서 해석하고 이를 기반으로 토사유실에 민감한 우심지역을 추출하기 위한 방법론을 제시해 보고자 하는 것이다. 이를 위하여 GIS를 기반으로 대상유역 내 지점별 배수면적과 함께 소류력 및 수류력을 정의하는 지형학적 인자를 추출하여 해당 인자들에 대한 여누가 분포의 도해적 해석과 함께 멱함수 법칙분포의 적합을 수행하였으며 소류력과 수류력의 규모별 특성권역을 기반으로 토양우실 우심지역을 추출하여 보았다. 소류력를 기반으로 한 토사유실 우심지역의 경우 수류력을 기반으로 한 결과에 비하여 우심지역의 범위가 매우 좁게 평가되고 있음을 시각적으로 확인할 수 있었다. 이러한 결과는 소류력이 멱함수 법칙분포를 따르지 않는 규모종속성 지형학적 인자이기 때문인 것으로 판단된다. 이에 따라 해당 지형학적 인자는 멱함수 법칙분포의 틀 내에서 자연유역의 에너지 규모를 적절하게 반영하지 못하는 것으로 사료되며 본 연구에서 수류력을 기반으로 제시한 지형학적 인자가 토사유실의 평가를 위해 보다 합리적인 것으로 판단된다. 토사유실 우심지역을 도시해 본 결과 국부경사에 종속적인 사면활동 활성구간에서 발생한 토사가 국부경사와 배수면적에 종속적인 지표유동 활성구간을 통하여 계곡으로 이동하는 경로를 시각적으로 확인할 수 있어 본 연구에서 제시한 방법론의 타당성을 판단할 수 있었다.

중소도시 구조물 개선을 위한 교량디자인 개발 연구 - 경남거창군 위천천을 중심으로 - (The Research on the Bridge Design Development for the Improvement of Small City structures - Focusing on Wicheon-stream in Geochang County, Gyeongsangnam-do -)

  • 김기수
    • 한국콘텐츠학회논문지
    • /
    • 제14권10호
    • /
    • pp.506-513
    • /
    • 2014
  • 자생적 경쟁력이 취약한 중소도시의 한계를 극복하고 도시민의 환경적, 문화적, 경제적 삶의 질을 향상시킬 수 있는 방안을 살펴보고 도시의 지리적 특성과 이동경로, 경제적인 현황파악, 단순한 문제점을 종합적으로 분석하여 중소주민들이 막연한 문제해결방안을 디자인적 실무방향을 3D 시뮬레이션 렌더링으로 제작하여 도시정책에 대한 가능성이 실질적인 대안으로 거듭날 수 있는 연구를 제시하고자 한다. 연구지역으로 선정한 거창군은 환경적 관점에서 교량이 차지하는 상징적 가치가 매우 높은 지역으로 평가되며 이러한 중심적 위치를 차지하는 교량의 공공디자인적인 새로운 디자인 개발은 도시의 경쟁력을 높일 수 있는 핵심역할로 자리 잡을 수 있는 좋은 방안으로 평가된다. 본 논문은 이러한 중소도시의 도시경쟁력을 재고와 지역과 지역을 연결시켜주는 문화 공간으로서의 교량 재창조사업 방향을 모색하고 지역에 알맞은 교량디자인을 제시하여 향후 공공디자인 개발에 관련된 합리적 유지관리 방향과 그 지역의 상징성 확보를 연구하고 지역개발에서 공공디자인의 역할이 도시의 경쟁력에 대안을 제시하는 사례개발로 실무 디자인을 연구하고자 한다. 따라서 교량디자인 연구개발 지역으로 선정한 경남 거창군의 핵심 하천인 위천천을 중심으로 교량을 새롭게 디자인하여 교량중심형도시의 상징성을 부각시키고 도시발전을 향상하고자 한다.

가압경수로의 부분충수 운전중 잔열제거계통 기능 상실사고시 가압기와 증기발생기 Manway 유출유로를 이용한 사고완화에 관한 연구 (A Study on the Vent Path Through the Pressurizer Manway and Steam Generator Manway under Loss of Residual Heat Removal System During Mid-loop Operation in PWR)

  • Y. J. Chung;Kim, W. S.;K. S. Ha;W. P. Chang;K. J. Yoo
    • Nuclear Engineering and Technology
    • /
    • 제28권2호
    • /
    • pp.137-149
    • /
    • 1996
  • 본 연구는 불란서 CEA에서 수행한 부분충수 운전 중 잔열제거계통 기능 상실사고 실험인 BETHSY 실험 6.9c를 CATHARE2 코드를 이용하여 분석하였다. BETHSY 6.9c 실험은 잔열제거 계통 기능상 실시 가압기와 중기발생기 출구공동의 Manway를 통해 노심에서 발생한 증기를 제거하여 계통의 가압 정도를 시험한 것이다. 연구의 주요목적은 사고발생시 예상되는 주요 물리적 현상의 이해와 과도기에 영향을 미치는 민감 변수를 확인하고 CATHARE2 코드의 예측능력을 평가하여, 실제원전의 유사사고 해석에 대한 신뢰성을 확보하는 것이다. 연구결과 CATHARE2 코드는 실험을 통해 관측된 주요 물리적 현상들을 타당하게 예측하였으나, 가압기와 밀림관의 DP를 과대 예측하여 원자로 상부공동의 최대압력을 실험보다 약 7kPa 높게 예측하였다. 노심 노출시간도 노심에서 기포율 분포를 비현실적으로 예측하여 실험보다 약 500초 지연되었다. 실험과 코드의 모의결과를 통하여 노심 노출은 중력주입에 의한 냉각수 보충만으로 충분히 회복될 수 있음을 확인하였다. CATHARE2 코드는 비록 상세한 현상들에 대해 다소 불화실성을 내포하였으나, 전반적인 거동분석에는 타당한 것으로 판단된다.

  • PDF