• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2169-2178
• /
• 2000

This paper proposes the structure of an agent and rules for fault detection and location on LAN. To find out a reason of critical fault incurred LAN, collision detection rule, error detection rule, broadcast detection rule, system location rule, and Internet application location rule ar shown. Also, the structure of multi-agent system and state transition diagram is portrayed to have connectivity with he set of rules. To verify availability of proposed rules, the process to find a faulty system is shown by monitoring and analyzing the LAN fault occurrences from the proposed set of rules. Such an rule based agent system is helpful to an Internet manager to solve a reason of fault and make ad decision from gathering management information.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2008

Risk is the probability of an adverse event given exposure to hazard. There are many reason for unsafety situation without safety operation. The reason is no safety evaluation system in small enterprise. And then this study purposes safety management activities that is evaluation system for total safety efficiency's maximization. Therefore, in this study, this model that can evaluate quantitative activities in small enterprise that maximize safety efficiency wishes to do design using balanced scorecard. In other words, this study aims to suggest a performance measurement model reflecting the characteristics of safety evaluation system, especially the model for return manufacturing related to safety, and to develop the S-BSC(Safety-Balanced ScoreCard) measurement model using a weight lifetime value to which a relative weight is applied by using AHP based on the BSC.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.127-132
• /
• 1996

We measured photoreflectance spectrum characteristics of InGaAs grown by MBE method on semi-insulating GaAs. The PR signal splitting of substate and epilayer was observed. The band gap energy was about 1.40 eV. It make to 8 meV difference when it is fitted by Pan's equation. The reason is stress on the interface, which is due to lattice mismatch between epilayer and substate . We became to know that reason influence crystalline on growing sample. In InGaAs epilayer, temperature dependency is low. The efficiency of photo absorption is high and activate over 200K. In this case when it is annealed at $400^{\circ}C$ below growing temperature, PR signal splitting is remarkable and crystalline is inhanced.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.179-184
• /
• 2001

The influence of the fatigue crack propagation by shot peening was studied in this paper. Fatigue tests were carried out on the unpeened and shot peened CT specimens. The changes of mechanical properties, residual stress, fatigue fracture surface etc. by shot peening were investigated. The mechanical properties, residual stress, fatigue surface etc. by shot peening were investigated. The mechanical peened specimen improved in fatigue life up to 14% by shot peening. The reason of increase in the fatigue life was closely related with the compressive residual stress, which was 519.7MPa on surface. Another reason was the constraint on crack opening on surface region, it is due to the decrease in slope of crack propagation direction.

• The Research Journal of the Costume Culture
• /
• v.5 no.1
• /
• pp.151-164
• /
• 1997

This study pursues the problems of plan photogrammetry which is widely used in somatotyping at present, and find out a method which can improve accuracy of measurement on the basis of principles and mechanisms of photography-the basic foundation of the photographic analysis methods. As a result, this study proposes a new method which is based on the reference point method and perspective coordinate system. And the test measurement was operated to compare the measurement accuracy of the proposed method and the method based on reference grid screen method and perpendicular coordinate system which is commonly used at present. The result of this test measurement showed that the proposed method has higher accuracy. Two reasons can be pointed out for the improvement of measuring accuracy. The first reason is that the proposed perspective coordinate system reduces the perspective distortion of photography. And second reason is that measuring points can be closely placed to the scale and coordinate reference plan of measurement by the proposed reference point method which make possible to place measuring object (or person) at the center of scale and coordinate reference plan by utilizing reference points of measurement in the three dimensional space not on screen.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1036-1041
• /
• 2008

In order to analysis the reason of sliding failure in embankment slope under construction in soft soil area, a model section located in Gimhae Region in Gyeongsangnam-Do, where the sliding failure had been occurred during embankment works in soft soil area, had been selected. This area had been firstly treated with the Pack Drain Method, and additional embankment works of 9.7 meters out of total 14 meters in thickness had been under construction. The results of analysis showed that the reason of sliding failure were overspeed in embankment construction and the overestimation of design factors in calculating strength of each layer of embankment and poor management and inaccuracy reading of measurement devices.

• Journal of Information Technology Applications and Management
• /
• v.19 no.3
• /
• pp.1-18
• /
• 2012

The present study highlights the conflict management levels in Indian manufacturing and Information Technology (IT) sectors. Nearly 110 samples from different organizations of manufacturing and IT have been collected using convenient sampling technique. Standardised scale on Organisational Conflict developed by Dhar U. and Dhar S. [2003] has been used which consists of twenty items on a four point scale. The study has shown that miscommunication at organizational level has been a reason for conflict in manufacturing organizations whereas intrinsic motivation at organizational as well as individual level has been found a reason for conflict in IT sector. The study bears implications for HR managers to develop policies and conflict management strategies so as to deal with the situations constructively at a particular level of conflict.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.43-48
• /
• 2011

In this paper, We have investigated the weak waterproofing defection characteristic of polymer humidity sensor and identified the cause of failure. In high temperature and high humidity conditions(($60^{\circ}C/95%$), the defecting process is simulated about defective and improved samples which are modified for the crosslinking polymer structure's aspect. It is aimed at the defecting reason and suggestion of defection process mechanism.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.721-728
• /
• 2003

Nowadays, a lot of enterprise completed the ERP implementation and these ERP-based enterprises consider the construction of WMS or already have done it. However the enterprises which Implemented WMS linked with ERP have many problems In the warehouse management and the reason ran be summarized In two poults First. In the integration point of view, only Interface issue between ERP and WMS was taken into account, therefore it was hard to reflect the phased process change. Second, a large number of WMS functions were tried to implement at the same tune and these attempts caused confusion and Instability which Is Interpreted as a main reason of the WMS failure. This paper presents the phased construction method for the successful implementation or WMS and in the integration point or view, the phased process change appears naturally

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.503-506
• /
• 2002

Electrorheological fluids(ERFs) show a rapid and reversible increase in viscosity by applied electric field. It is called the electrorheological effect (ER effect). The reason for ER effect is the induction of an electric dipole in each particle, leading to the formation of clusters in the direction of the field, which resist fluid flow. Generally, the behavior of ER fluids has been modeled on those of Bingham fluids. But there are some differences between Bingham fluids and ER fluids. The visualization of ER fliuds are presented and ER effects by the forming, growing and breaking of clusters are discussed. In the low shear rate area, the pressure drop is measured by a pressure sensor and the formation of ER particles is visualized by video camera. The reason for the nonlinear behavior of ER fluids at low shear rate is explained through results of visualization.