• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1343-1348
• /
• 1990

The architecture and functions of a prototype free ranging AGV system are described in this paper. The system has single tricycle configuration - the front wheel is driven and steered simultaneously. The primary position measurement device of this system is the redundant encoder system - an absolute encoder for the steering angle measurement of the front wheel, two incremental encoders for the measurement of the rear wheel rotations. The secondary position measurement device is implemented to reduce the accumulatad error in encoder measurements. The extended Kalman filter is suggested to combine the conflict measurement data for the proper position estimation.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.35-44
• /
• 2012

In this study, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this paper, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.76-85
• /
• 1997

The understeer characteristics of four wheel steering system(4WS system) in a high speed region have a negative effect upon the yaw velocity, leading to a decrease in the handling ability of vehicle. As a result, even if the side slip angle of vehicle can be kept up a minimum, a driver must compensate a decrease in yaw velocity by increasing the steering wheel angle in order to track the desired vehicle path. In this study, to keep the side slip angle of vehicle at zero and achieve a suitable yaw velocity in vehicle motion, a full active 4WS system(FA 4WS system) with actively steerable front and rear wheels is presented based on a nonlinear vehicle model and a model following control of yaw velocity. And the analysis results show the fat that, besides the excellent stability of vehicle, the FA 4WS system is able to realize better handling performance of vehicle than the previous 4WS systems in the high speed region.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.197-205
• /
• 2018

In this research, tricycle vehicle simulation based on multi-body environment has been introduced. Mathematical model of tricycle vehicle was developed. In this research the left and right wheel speed are calculated based on the rear steering angle and velocity. The kinematic model for the three - wheel drive system was completed and the results were analyzed using the actual vehicle drawings. Through simulink vehicle performance on linear and rotation movement were simulated. Using the mathematical model the control system can be applied directly to the tricycle vehicle. The simulation result shows that the proposed vehicle model is successfully represent the movement characteristics of the real vehicle. This model assists the vehicle developer to create the controller and understand the vehicle during the development process.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.325-329
• /
• 2001

This paper deals with a newly developed direction indicator system of a car which displays left turn and U- turn signal differently, so that the following driver can identify the Intent of the next car ahead easily. In general, when a car want to change its direction, the driver move the blinker lever below the steering wheel up or down. However, as the left turn and U-turn signal are the same, there always be the risk of rear-end collision by misinterpreting U-turn signal as left turn signal. In this paper, a new direction indicator system which differentiates left turn and U-turn signal is developed. The left turn signal is the same as before, but when a driver want to U-turn, an additional U-turn signal blinks at the rear of the car. By identifying the direction signals clearly, the developed system is expected to alleviate the risk of car accident.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.181-188
• /
• 2001

This paper deals with a newly developed direction indicator system of a car which displays left turn and U-turn signal differently, so that the following driver can identify the intent of the next car ahead easily. In general, when a car want to change its direction, the driver move the blinker lever below the steering wheel up or down. However, as the left turn and U-turn signal are the same, there always be the risk of rear-end collision by misinterpreting U-turn signal as left turn signal. In this paper, a new direction indicator system which differentiates left turn and U-turn signal is developed. The left turn signal is the same as before, but when a driver want to U-turn, an additional U-turn signal blinks at the rear of the car. By identifying the direction signals clearly, the developed system is expected to alleviate the risk of car accident.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.392-397
• /
• 2006

This paper proposed yaw moment control scheme using braking and active rear wheel steering for improving driving stability especially in high speed driving. Its characteristics the unified chassis control system of two equipment that 4WS(4 Wheel Steering) and ESP(Electronic Stability Program). in this study the performance of the vehicle was compared each equipment. And conventional ABS and TCS can only possible to control the longitudinal movement of braking equipment and drive which can only available to control of longitudinal direction. There after new braking system ESP was developed, which controls both of longitudinal and lateral, with adding of the function of controlling Active Yaw Moment. On this paper, we show about not only designing of improved braking and steering system through establishing of the integrated control system design of 4WS and ESP but also designing of the system contribute to precautious for advanced vehicle stability problem.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3060-3070
• /
• 2015

Recently, novice driver or weak drivers was difficult to understand the movement characteristics of the car and are immature sense of width and length of the car according to various each driver's sex and age, model. To complement this problem, the use of rear sensor and the camera is increased. And the parking assistance system that improves the convenience of parking the driver is being developed. Accordingly, parking guide system is needed to reflect the difference in the steering angle and correct the error distance. In this study, it is proposed that the turning radius during backward by complementing the existing Ackerman Jentaud type. And it develops more accurate parking guideline to be able to generat algorithm by applying the formula to propose a steering wheel angle sensor value derived through the handle.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.2
• /
• pp.153-159
• /
• 2016

In this paper, a mechanism of an omni-directional personal mobility which can drive diagonally is proposed. Mobility is a prerequisite involved in basic human life and activities. Personal mobility vehicle is a new mobility method which overcome the limits of automobiles. However, personal mobilities with four wheeled structure still have limitations. The proposed personal mobility vehicle can overcome the limitations of mobility because its rear wheels can be steered omni-directionally. In addition, the handicapped can drive it through a narrow road such as an alleyway or corridor and avoid obstacles on the traveling route. The proposed mechanism of personal mobility and the steering performance are tested by experiments, and the feasibility of diagonal driving is verified.

• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2007

This paper proposes a traction control system (TCS) that uses a sliding mode wheel slip controller and a PID throttle valve controller. In addition, a yaw motion controller (YMC) is also developed to improve lateral stability using a PID rear wheel steering angle controller. The dynamics of a vehicle and characteristics of the controllers are validated using a proposed full-car model. A driver model is also designed to steer the vehicle during maneuvers on a split ${\mu}$ road and double lane change maneuver. The simulation results show that the proposed full-car model is sufficient to predict vehicle responses accurately. The developed TCS provides improved acceleration performances on uniform slippery roads and split ${\mu}$ roads. When the vehicle is cornering and accelerating with the brake or engine TCS, understeer occurs. An integrated TCS eliminates these problems. The YMC with the integrated TCS improved the lateral stability and controllability of the vehicle.