• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.352-357
• /
• 2016

More recently, workers and passengers of casualties has increased by rear-end collisions of unexpected while working on the road. Recently attracted air chamber TMA mounting car accidents which occurred in 3 years, and analyzed the effect of reducing the shock absorption and protection performance and casualties. There is a risk of the vehicle AIS4 more injury of high five accidents of casualties risk, also, was the analysis that there is risk of death was avoided by the air chamber TMA and SGT. Therefore, by mounting the TMA in the rear-end accident, so you can reduce the death and casualties, it must be increased this of attach rate for road construction vehicle.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2011

Recent advancement in traffic surveillance systems has allowed the researchers to obtain more detailed vehicular movement such as individual vehicle trajectory data. Understanding the characteristics of interactions between leading and following vehicles in the traffic flow stream is a backbone for designing and evaluating more sophisticated traffic and vehicle control strategies. This study proposes a methodology for estimating rear-end crash potential, as a probabilistic measure, in real-time based on the analysis of vehicular movements. The methodology presented in this study consists of three components. The first predicts vehicle position and speed every second using a Kalman filtering technique. The second estimates the probability for the vehicle's trajectory to belong to either 'changing lane' or 'going straight'. A binary logistic regression (BLR) is used to model the lane-changing decision of the subject vehicle. The other component calculates crash probability by employing an exponential decay function that uses time-to-collision (TTC) between the subject vehicle and the front vehicle. The result of this study is expected to be adapted in developing traffic control and information systems, in particular, for crash prevention.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.152-167
• /
• 2018

The high-speed weigh-in-motion system can collect the traveling speed and load information of individual vehicles, which can be used in a variety of ways for the traffic surveillance. However, it has a limit to apply the high-speed weigh-in-motion data directly to a safety analysis because high-speed weigh-in-motion's raw data are point measured data. In order to overcome this problem, this paper proposes a method to calculate the conflict rate and the Impulse severity based on surrogate safety measures derived from the detection time, detection speed, vehicle length, vehicle type, vehicle weight. It will be possible to analyze and evaluate the risk of rear-end collision on freeway traffic. In addition, this study is expected to be used as a fundamental for identifying crash risks and developing policies to enhance traffic safety on freeways.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1247-1254
• /
• 2009

The purpose of the present study was to compare and analyze the differential effects of in-vehicle electronic device usage types(searching for targeted destinations in navigational purpose, watching TV in entertain purpose, and dialing a cellular-phone in phone-usage purpose) on driver's front-to-rear-end collision avoidance behavior, and to find effective collision warning format for this behavior. The result indicated that (1) the drivers showed more impaired collision avoidance performances when they were asked to search the name of targeted destination than the other task requirements, and (2) auditory warning appeared to be most effective among the other types of warning. In particular, it was suggested that the "Visual-Only" collision warning could induce most undesirable result when the drivers were engaged in both visual and auditory information processing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.251-258
• /
• 2018

Recently, due to the increase in the traffic volume of vehicle, the collision of the vehicle collision has been increased so that the neck injuries of the passengers has been increased. In order to prevent this, vehicle collision analysis research using computer simulation has been actively carried out in consideration of the design point of car seat. In this study, I used the MADYMO program for analyzing the passenger behavior using a BioRID II dummy, and predicted the neck injuries of passengers according to the change of the backset at the rearward collision of the driving speed of 16km/h. As a result, it was found that the shorter the backset, the shorter the contact start time but the contact completion time was almost the same and the T1 acceleration showed that the acceleration increased with the backset. In addition, the tensile strength increases as the backset increases, and NIC (Neck Injury Criterion) increases as the head speed reaches the headrest.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.54-61
• /
• 2013

Although typically classified as AIS 1, whiplash injuries continue to represent a substantial social problem with associated costs estimated at over $1 billion annually. The primary objective of this study was to determine the effects of seat positions(seatback angle, headrest height) on risk for whiplash injury in very low speed(${\Delta}V$=4~10km/h) rear-end impact. To accomplish this, rear impact seat carriage tests and simulations were conducted using the BioRID-II dummy seated in a mass production seat, which allowed for the adjustment of seatback angle and headrest height. Neck injury criteria(NIC, Nkm) were then compared for different ${\Delta}V$ and seat positions.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.849-854
• /
• 2007

This paper describes design and tuning of a full-range Adaptive Cruise Control (ACC) with collision avoidance. The control scheme is designed to control the vehicle so that it would feel natural to the human driver and passengers during normal safe driving situations and to avoid rear-end collision in vehicle following situations. In this study, driving situations are determined using a non-dimensional warning index and time-to-collision (TTC). A confusion matrix method based on natural driving data sets was used to tune control parameters in the proposed ACC System. An ECU-Brake Hardware-in-the-loop Simulation (HiLS) was developed and used for an evaluation of ACC System. The ECU-Brake HiLS results for alternative driving situation are compared to manual driving data measured on actual traffic way. The ACC/CA control logic implemented in an ECU was tested using the ECU-Brake HiLS in a real vehicle environment.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.797-807
• /
• 2009

In a case of an automobile rear-end collision, scale of the collision which are the extent of vehicle damage and the injury of the passenger is affected by the speed change. Based on the photographic interpretation of the actual accident cases in the Seoul and the Incheon area, this study measured the depth of crush and calculated the speed change from the statement data of the accident and speed, and also injury data such as diagnosis, hospitalization days are collected. The period of hospitalization and diagnostics claimed proves to have no statistical correlation with the depth of vehicle crush and speed change. Based on the statistical analysis from this study and previous foreign studies, we found that there have been 78.1% of personal accidents didn't reach the injury threshold. There should be objective information on the scale of accident accepting the claims-to-be-injured in the future, and application of injury threshold level suggested are considered to be very useful.

• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.314-320
• /
• 2016

Purpose: This study compared the effectiveness of sling exercise and McKenzie exercise in patients with acute cervical whiplash associated disorder (WAD) caused by rear-end collision. Methods: Thirty WAD patients were randomly assigned to one of three groups; a sling exercise (SE) group, a McKenzie exercise (McE) group, and a control group. Members of the SE and McE exercised three times a week for four weeks under the researcher's guidance. Three groups performed TENS treatment three times a week for four weeks. Diagnostic radiological equipment was used to measure whiplash injury. Visual analog scale (VAS), neck disability index (NDI), and range of motion (ROM) were used in this study. Results: The three groups showed a significant pre-post treatment difference in measures of VAS and NDI (p<0.05). The SE group showed a significant pre-post treatment difference in measures of flexion and extension changes compared to the McE and control group (p<0.05). The SE group also showed significantly greater improvement in the VAS, NDI, and ROM changes than the control group (p<0.05). Conclusion: These findings indicate that sling exercise is a stronger and more aggressive intervention for treatment of acute WAD patients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.139-143
• /
• 2010

Whiplash injuries often occur in motor vehicle collision accidents. This injury frequently occurs in the cervical region. However, the reason for this has not yet been clarified. In this study, a multi-body neck model with muscles was designed. Some muscles in the model were preloaded; these were previously determined using the concept of the follower load. Cervical spinal vertebrae, discs, and muscles were designed in accordance with the human cervical spine. The purpose of this study was to investigate the effect of preloads on muscles. The results imply that the whiplash model with preloaded muscles simulates practical situations more closely than models without preloads.