• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.211-215
• /
• 2015

It comes into the spotlight as the new Blue Ocean in which the connected car industry in which the car and mobile communication technology is convergence. All sorts of infortainments services connecting with the portable electronic device(Smart phone, tablet PC, and MP3 player) and car are rapidly grown. The Connected car emphasizes the vehicle connectivity with the concept that the car has communication with the around on a real time basis and it provides the safety and expedience to the operator and using the thing of Internet (IoT) in the car and supports the application, presently, the entertainment service including the real-time Navigation, parking assistant function, not only the remote vehicle control and management service but also Email, multimedia streaming service, SNS and with the platform. Intelligent vehicle network is studied as the kind according to MANET(Mobile Ad Hoc Network) for the safety operation of the cars of the road and improving the efficiency of the driving. The intelligent vehicle network is comprised for the driving information offering changing rapidly of the communication(V2V: Vehicle to Vehicle) between the car and the car, communication(V2I : Vehicle to Infrastructure) between the infrastructure and the car, and V2X (Vehicle to Nomadic).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.393-401
• /
• 2003

Automatic control technologies for the marine pile driving provides accurate and rapid intruding into the planned positions of the pile with planned slope and direction, so that the construction maintenance and management are more efficient and the quality of the construction is more promising. Therefore, in this study, the application scheme of RTK GPS to the automatic control of the pile driving presented. It is expected that the presented scheme using the precise RTK GPS technique assures the efficient and economic 3D positioning accuracy for the precise marine construction management like the precise foundation of marine structures made of piles and the dredging work. It is found that the suggested scheme decrease 60% of the construction error compared with specifications reference because marine position accuracy is measured within 4cm in real time. In addition, the automatic position control system using GPS reduced the construction period and cost compared with existing methods about 30% and 35%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.739-744
• /
• 2017

Elastic deformation and fatigue damage can cause the permanent deformation of a kart's frame during turning, affecting the kart's driving performance. A kart's frame does not contain any suspension or differential devices and, therefore, the dynamic behavior caused by torsional deformation when driving along a curve can strongly affect these two kinds of deformations. To analyze the dynamic behavior of a kart along a curved section, the GPS trajectory of the kart is obtained and the torsional stress acting on the kart-frame is measured in real time. The mechanical properties of leisure and racing karts are investigated by analyzing their material properties and conducting a tensile test. The torsional stress concentration and frame distortion are investigated through a stress analysis of the frame on the basis of the obtained results. Leisure and racing karts are tested in each driving condition using driving analysis equipment. The behavior of a kart when being driven along a curved section is investigated through this test. Because load movement occurs owing to centrifugal force when driving along a curve, torsional stress acts on the kart's steel frame. In the case of a leisure kart, the maximum torsional stress derived from the torsional fatigue limit was found to be 230 MPa, and the torsional fatigue limit coefficient was 0.65 when driving at a speed of 40 km/h. Furthermore, the driving elements during the cornering of a kart were measured based on an actual auto-test after installing a driving measurement system, and the driving behavior of the kart was analyzed by measuring its vertical displacement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.485-492
• /
• 2023

Among the methods to improve traffic congestion by providing real-time traffic information and solving problems like traffic congestion and traffic crashes, private enterprise is implementing policies to lower insurance premiums like compensation for drivers' driving safety scores. Despite the emergence of various incentive policies, a study on the level of incentive payment for safe/eco-friendly driving is insufficient. The research analyzed the satisfactory factors that affect the scale of incentives through questionnaires and the applicable scale of incentives that enable safe/eco-friendly driving using a binary logistic regression model. As a result of analyzing the incentive scale of the appropriate payment amount for each driving score increase, 0.4% of the toll fee was derived when the driving score increased by 20 points, and 0.5% of the toll fee was derived when the driving score increased by 30 points. This study on calculating the appropriate incentive payment scale for driver information sharing and driving score increase will help optimize incentives and prepare system implementation plans.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.67-74
• /
• 2019

The automotive market has recently been investing much time and costs in improving existing technologies such as ABS (Anti-lock Braking System) and TCS (Traction Control System) and developing new technologies. Additionally, various methods have been applied and developed to reduce this. Among them, the development method using the simulation has been mainly used and developed. In this paper, we have studied a method to develop SILS (Software In the Loop Simulation) for TCS which can test various environment variables under the same conditions. We modeled hardware (vehicle engine and ABS module) and software (control logic) of TCS using MATLAB/Simulink and Carsim. Simulation was performed on the climate, road surface, driving course, etc. to verify the TCS logic. By using SILS to develop TCS control logic and controller, it is possible to verify before production and reduce the development period, manpower and investment costs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.1
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.9
• /
• pp.7-14
• /
• 2018

Purpose - Social welfare is a social insurance system that provides funds and services for all citizens to maximize their life quality. Its ultimate goal is to alleviate social contradictions. Therefore, this paper explores the determinants of social welfare in terms of macroeconomics. Research design, data, and methodology - Based on the vector error correction model, the annual time series from 1990 to 2017 will be used to conduct an empirical analysis. The real GDP, the real income, the inflation and the degree of openness will be treated as independent variables. The input of social welfare will be treated as a dependent variable. These variables will be used to perform the cointegration test and the vector error correction model to explore how the macroeconomic variables affect social welfare both in long run and short run. Result - Via the empirical analysis, it can be summarized that the real GDP, the real income and the degree of openness are the driving determinants to enlarge the social welfare. Conversely, the inflation is the obstructive determinant to reduce the social welfare. Conclusion - The positive and negative determinants of social welfare exist simultaneously, China's government should take macroeconomic regulation and control to balance them to enlarge social welfare.

• Korean Journal of Artificial Intelligence
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2018

Recently, the rapid development of artificial intelligence industry has resulted in a great change in our modern society. Due to this background, this paper takes the United Kingdom as an example to explore the determinants of artificial intelligence industry in terms of United Kingdom's macroeconomics. The quarterly time series from the first quarter of 2010 to the fourth quarter of 2017 will be employed to conduct an empirical analysis under the vector error correction model. In this paper, the real GDP, the employment figure, the real income, the foreign direct investment, the government budget and the inflation will be regarded as independent variables. The input of artificial intelligence industry will be regarded as a dependent variable. These macroeconomic variables will be applied to perform an empirical analysis so as to explore how the macroeconomic variables affect the artificial intelligence industry. The findings show that the real GDP, the real income, the foreign direct investment and the government budget are the driving determinants to promote the development of artificial intelligence industry. Conversely, the employment figure and the inflation is the obstructive determinants to hamper the development of artificial intelligence industry.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.185-190
• /
• 2019

For future autonomous cars, it is necessary to recognize various surrounding environments such as lanes, traffic lights, and vehicles. This paper presents a method of speed sign recognition from a single image in automatic driving assistance systems. The detection step with the proposed method emphasizes the color attributes in modified YUV color space because speed sign area is affected by color. The proposed method is further improved by extracting the digits from the highlighted circle region. A sequential cascade AdaBoost classifier is then used in the recognition step for real-time processing. Experimental results show the performance of the proposed algorithm is superior to that of conventional algorithms for various speed signs and real-world conditions.

• Journal of Mechanical Science and Technology
• /
• v.17 no.2
• /
• pp.221-229
• /
• 2003

In the virtual environment, reality can be enhanced by offering the motion based on a motion simulator in harmony with visual and auditory modalities. In this research the Stewart-Gough-platform-based motion simulator has been developed. Implementation of vehicle dynamics is necessary in the motion simulator for realistic sense of motion, so bicycle dynamics is adopted in this research. In order to compensate for the limited range of the motion simulator compared with the real vehicle motion, washout algorithm composed of high-pass filter, low-pass filter and tilt coordination is usually employed. Generally, the washout algorithm is used with fixed parameters. In this research a new approach is proposed to tune the filter parameters based on fuzzy logic in real-time. The cutoff frequencies of the filters are adjusted according to the workspace margins and driving conditions. It is shown that the washout filter with the fuzzy-based parameters presents better performance than that with the fixed ones.