• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.405-410
• /
• 2008

This paper presents a data acquisition and monitoring system for a gas turbine. The proposed system entitled C-Tune DAS plays an important role to make an analysis of the real-time operation of the gas turbine under maintenance. The designed LabVIEW based software is divided into three parts according to their original functions, i.e., data acquisition, data analysis with display, and data storage. The data acquisition part receives data from a PMS (Plant Management System) server and two cFPs (Compact-Field Point). To verify the validity of the developed system, it is applied to gas turbines in the combined cycle power plant in Korea.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.851-858
• /
• 2012

In this paper, we design a seismic data acquisition system(SDAS) and implement it. This system is essential for development of a noble local earthquake disaster preventing system in population center. In the system, we choose a proper MEMS-type triaxial accelerometer as a sensor, and FPGA and ARM processor are used for implementing the system. In the SDAS, each module is realized by Verilog HDL and C Language. We carry out the ModelSim simulation to verify the performances of important modules. The simulation results show that the FPGA-based data acquisition module can guarantee an accurate time-synchronization for the measured data from each axis sensor. Moreover, the FPGA-ARM based embedded technology in system hardware design can reduce the system cost by the integration of data logger, communication sever, and facility control system. To evaluate the data acquisition performance of the SDAS, we perform experiments for real seismic signals with the exciter. Performances comparison between the acquired data of the SDAS and the reference sensor shows that the data acquisition performance of the SDAS is valid.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1675-1682
• /
• 2014

In this paper, we propose a precise time management and time synchronization based on real-time data storage and transmission scheme in design of seismic data acquisition system for urban earthquake disaster preventing system (UEDPS). It is possible to improve the performance of the existing research results through the proposed methods. To evaluate the performances of the proposed methods, we implemented a prototype system(H/W & S/W) and performed some experiments with real seismic data and test equipment generated data as the input.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2322-2327
• /
• 2009

Uncertainty of power system operation increases due to complexity and facilities diversification in the power system. Therefore the importance of SCADA(Supervisory Control and Data Acquisition) system which obtain and manage the actual data in real-time is very important. Accordingly in the studies of power system analysis, the efforts to include real-time power system analysis in simulation and applications are made in many ways. The real-time communication characteristics of SCADA system is considered so as to develop the power system analysis program that matches actual system conditions. The observation and management of SCADA system is realized by Intouch which is mainly used for factory automation and PSS/E(Power System Simulator for Engineers) provides real time system data. SQL DB and Python language is used for real-time communication between the softwares. It is very comfortable to use the various functions in Intouch WindowMaker.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.303-305
• /
• 2022

우리나라는 지형학적, 수문학적 특성상 연중편차가 심한 물순환 특성을 보이고 있고, 최근에는 지구온난화와 기상이변 등으로 인해 수문현상의 변동성이 더욱 커지고 있다. 따라서 홍수, 가뭄 등 수문현상을 신속하게 파악하고 대비하기 위해서는 최신 ICT 기술을 융합한 과학적인 물관리의 필요성이 커지고 있다. 이에 K-water는 인공위성을 통해 실시간으로 수집하고 있는 수문자료와 GIS, CCTV를 연계하여 현장의 상황을 보다 직관적으로 확인할 수 있는 실시간 수문정보시스템(HDAPS : Hydrological Data Acquisition and Processing System)을 운영하여 홍수와 가뭄에 대비하고 있다. 본 논문에서는 K-water의 실시간 수문정보시스템을 소개하고 국민의 생명과 재산을 보호하기 위한 활용방안을 고찰해 보고자 한다.

• 한국통신학회논문지
• /
• 제7권2호
• /
• pp.66-70
• /
• 1982

多數의 마이크로프로세서와 이를 연결해 주는 미니컴퓨터로 構成된 實時間 온라인制御시스템에서의 데이터通信의 제반양식 및 그 접속단의 한 방안이 제시되고 설계되었다. 접속단은 DMA 方式으로 함으로써 방대한 制御프로그램을 단순화 할 수 있었다. 이 方式은 실제로 서울市의 交通管制시스템에서 活用되어 成功的으로 실험되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2956-2958
• /
• 2000

This paper describes the design of a real time traffic data acquisition system using loop detector and piezzo sensor. Loop detector is the cheapest method to measure the speed and piezzo is used to detect the vehicle axle information. A ISA slot based I/O board is designed for data acquisition and PC process the raw traffic data and transfer the data to the host system. Simulation kit is designed with toy car kits. simulated loop detector and piezzo sensor. The data acquisition system collects up to 10 lane highway traffic data such as vehicle count. speed. length axle count. distance between the axles. The data is processed to generate traffic count, vehicle classification, which are to be used for ITS. The system architecture and simulation data is included and the system will be tested for field operation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권6호
• /
• pp.286-295
• /
• 2006

This paper presents a design of a real-time software GPS receiver which runs on a PC. The software GPS receiver has advantages over conventional hardware based receivers in terms of flexibility and efficiency in application oriented system design and modification. In odor to reduce the processing time of the software operations in the receiver, a shared memory structure is used with a dynamic data control, and the byte-type IF data is processed through an Open Multi-Processing technique in the mixer and integrator which requires the most computational load. A high speed data acquisition device is used to capture the incoming high-rate IF signals. The FFT-IFFT correlation technique is used for initial acquisition and FLL assisted PLL is used for carrier tracking. All software modules are operated in sequence and are synchronized with pre-defined time scheduling. The performance of the designed software GPS receiver is evaluated by running it in real-time using the real GPS signals.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.781-788
• /
• 2003

It is an essential process to predict behaviors of ground and structure to seek economical efficiency and stability on the given environment. Predictions are conducted through analysis process of ground and structure. For these analyses, exact and quick acquisition of measuring data is required. But we face many difficulties in data acquisition stages due to the conditions of construction site. Therefore development of a powerful and effective monitoring system that can manage the integration of database and the implementation of measuring process in real time is strongly desired. This article shows an actual example of application of internet based monitoring system compared with the conventional monitoring system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.