• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.423-428
• /
• 2023

In the missile actuator system, the time and position of the wings of the drive device are very important factors in the initial maneuver of the missile, and therefore, the missile actuator device must be inspected while ensuring the accuracy and real-time of motion collection data of the actuator. In this study, the difference between the design and implementation method for checking the existing actuator device and the design implementation method of the actuator device through the DAQ(Data Acquisition) device is compared, and the difference in data collection amount and real-time data collection performance is compared and tested, and the data shown through actual tests are compared. is converted into a graph, the actuator waveform is compared and analyzed, and based on the analyzed data, DAQ device inspection configuration that guarantees real-time response speed and stability during inspection of existing actuators and DAQ devices is proposed.

• Korean Journal of Remote Sensing
• /
• v.26 no.6
• /
• pp.629-644
• /
• 2010

A real-time image georeferencing system requires all inputs to be determined in real-time. The intrinsic camera parameters can be identified in advance from a camera calibration process while other control information can be derived instantaneously from real-time GPS/INS data. The bottleneck process is tie point acquisition since manual operations will be definitely obstacles for real-time system while the existing extraction methods are not fast enough. In this paper, we present a fast-and-automated image matching technique based on the KLT tracker to obtain a set of tie-points in real-time. The proposed work accelerates the KLT tracker by supplying the initial guessed tie-points computed using the GPS/INS data. Originally, the KLT only works effectively when the displacement between tie-points is small. To drive an automated solution, this paper suggests an appropriate number of depth levels for multi-resolution tracking under large displacement using the knowledge of uncertainties the GPS/INS data measurements. The experimental results show that our suggested depth levels is promising and the proposed work can obtain tie-points faster than the ordinary KLT by 13% with no less accuracy. This promising result suggests that our proposed algorithm can be effectively integrated into the real-time image georeferencing for further developing a real-time surveillance application.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1177-1188
• /
• 2002

To classify real time Lead pin images in this paper, The image acquisition system was composed to C.C.D, image frame grabber(DT3153), P.C(PentiumIII). I proposed image processing algorithms. This algorithms were composed to real time monitoring, Lead Pin image acquisition, image noise deletion, object area detection, point detection and pattern classification algorithm. The raw images were acquired from Lead pin images using the system. The result images were obtained from raw images by image processing algorithms. In implemental result, The right recognition was 97 of 100 acceptable products, 95 of 100 defective products. The recognition rate was 96% for total 200 Lead Pins.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• Journal of Information Management
• /
• v.29 no.2
• /
• pp.1-17
• /
• 1998

The Inno-NET, which is based on the Internet and up-to-date information technology, is a consolidated system to provide business-related information and to solve the difficulties in business activities. In particular, the Inno-NET is an information system to integrate such business information for enterprise as start-up, financing, technology development, recruiting, site acquisition, marketing, trade and investment and so on, in order to help companies solve their problems and make up for their weak points. Accordingly, the Inno-NET will systematically connect supporting agencies and innovative enterprises, thus guaranteeing the exchange of information among them and coordinating the business. The supporting agencies will be included government offices, public organizations, research institutes, universities, and industrial associations all over the ministries. In short, Inno-NET forms a real-time decision making system among government, industries, universities and research institutes. by elt:ictronic networking on the Internet.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.781-788
• /
• 2003

It is an essential process to predict behaviors of ground and structure to seek economical efficiency and stability on the given environment. Predictions are conducted through analysis process of ground and structure. For these analyses, exact and quick acquisition of measuring data is required. But we face many difficulties in data acquisition stages due to the conditions of construction site. Therefore development of a powerful and effective monitoring system that can manage the integration of database and the implementation of measuring process in real time is strongly desired. This article shows an actual example of application of internet based monitoring system compared with the conventional monitoring system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.80-85
• /
• 2013

Recently it is becoming more common to apply vehicle electronics(Vetronics) based on information technology to improve the operability of the combat vehicles. Although the vehicle electronics system has been gradually developed, it is hard not only to design the reliable system which is a built-in multi-function but also to analyze the fault failure in the state of on-vehicle when failures occur. Therefore, It is required the data logging system like a aircraft's black box for the combat vehicles to enhance the reliability. In this paper, we developed the multi data acquisition and analysis device which is acquiring real-time data such as communication data, video data and voice data available for checking operational status of system and managing history. The performance of device has been proved on the vehicle.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.229-234
• /
• 2006

Acquisition is to detect the presence of the GPS signal. Once the signal is detected, the estimated frequency and code phase are passed to a tracking loop to demodulate the navigation data. In order to detect the weak signal, multiple length of data integration is always needed. In this paper, we present five different acquisition approaches based on circular correlation and Fast Fourier Transform (FFT), using coherent as well as non-coherent integration techniques for the multiple length of collected GPS satellite signal. Moreover a general approach of determining the acquisition threshold is introduced based on noise distribution which has been proved effective, and independent of the hardware. In the end of this paper, the processing speed and acquisition gain of each method are illustrated, compared, and analyzed. The results show that coherent approach is much more time consuming compared to noncoherent approaches, and in the case of multiple length of data integration from 2ms to 8ms, the processing times consumed by the fastest non-coherent acquisition method are only 25.87% to 1.52% in a single search, and 34.76% to 1.06% in a global search of those in the coherent acquisition. However, coherent acquisition also demonstrates its better performance in the acquisition gain, and in the case of 8ms of data integration it is 4.23 to 4.41 dB higher than that in the non-coherent approaches. Finally, an applicable scheme of combining coherent and non-coherent acquisition approaches in the development of a real-time Software GPS receiver in the University of Tokyo is provided.