• 한국항해항만학회지
• /
• 제34권8호
• /
• pp.623-628
• /
• 2010

현재 모형선을 이용한 선형성능 검증설비는 예인수조와 회류수조 두설비가 주로 이용된다. 이들 설비는 주로 저속 대형선박을 위해 기법들로 소형 고속어선 및 고속레저선박의 저항성능 평가를 수행하기에 전차의 속도와 유속이 목표속도에 미치지 못해 어려움이 존재한다. 따라서 고속 선박의 저항성능 평가를 위해 새로운 기법 정립 연구가 필요하다. 이에 고속선의 저항성능 시험을 위해 실제 해상에서 선박을 이용한 모형시험을 고안하고 측정시스템을 구성하였다. 시스템구성은 총 8개의 파트로 구성되어 있으며, 시스템 검증을 위해 C.W.C에서 저속선의 모형을 이용하여 시험을 수행하여 시스템 적용 가능성을 검증하였다. 또한 실제 해상에서 고속선 모형선을 이용하여 시험을 수행하였으며, 이 결과를 CFD해석 결과와 비교하여 실해상 모형시험 방법의 가능성을 확인 하였다.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.593-600
• /
• 2014

실시간 해수유동 정보를 중심으로 신조선 선박의 실선시운전에서 활용될 수 있는 정보 제공 시스템을 개발하였다. 본 시스템에서는 실선시운전 지원 정보로서 특정시간 해수유동의 공간분포를 예측하여 제공하며, 특정지점 해수유동의 시계열 변동을 예측하여 제공한다. 또한 본 시스템은 실선시운전에 있어 시험선박 운항경로에서의 해수유동 정보 및 선속 손실정보를 제공하기 위하여 GPS와 연결할 수 있는 기능을 가지고 있으며, 이러한 기능을 이용하여 실선시운전시 자동으로 운항경로상의 해수유동 실시간 정보 및 해수유동에 의한 선속손실을 계산하여 제공한다. 실선시운전 중의 정보 제공 이외에, 본 시스템에서는 특정한 시험시간과 시험경로에 대해 선속손실을 예측하여 제공함으로써 최적의 시험시간 및 시험경로를 계획할 수 있도록 지원하는 기능도 가지고 있다. 본 연구에서 개발된 실선시운전을 위한 실시간 해수유동 예측시스템은 효율적인 시험계획과 정확한 해역특성 파악을 지원할 뿐 아니라, 실선에 탑재되어 시험 중에 요구되는 다양한 정보를 제공한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.355-358
• /
• 2006

An underwater mooing target position tracking system using image tracking system of CPMC is developed to use in a test basin. Generally the performance tests of Autonomous Underwater Vehicles(AUVs) are conducted in the sea. Some efforts to perform the test in a test basin are exist, because the real sea tests need much time and manpower. And also the real sea tests are high cost. There is a restriction to acquire the position of AUVs using sonar sensor system in the test tank, because many sound reflecters are exist in a test basin. In this paper a position tracking system for underwater mooing target developed to break though this restriction. A Tank-test is conducted to examine the performance of the position tracking system.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.53-58
• /
• 2009

A scale model test for ship Infra-Red signature measurements at sea is impossible, because it is sensitive to the environment. Since we can't control the meteorological environment of the real sea, it can't be carried out with the desired maritime environments. Therefore, in the sea, we made measurements of the weather, operating conditions of the ship, and ship IR signatures under given conditions, and then analyzed them. Conversely, we compared the results of the test with a prediction for a given scenario condition. This paper describes the test items, procedures, and measuring instruments of the experiments at sea and the results from basic researches for methods of estimation and analysis of the measured data.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.229-236
• /
• 2008

심해저 망간단괴를 채집하기 위한 집광기는 궤도차량 형태로 해저면을 주행하면서 망간단괴를 채집한다. 집광기의 운영은 수상선에서 실시간 원격으로 제어되며, 이를 위해서는 운영 소프트웨어가 중요한 역할을 차지하게 된다. 현재는 실제 심해저 망간단괴 집광기의 개발에 앞서 시험집광기를 개발하여 근해역 성능 실증시험을 준비중에 있다. 이러한 시험집광기는 기계부와 전기 전자부로 구성되는데, 이를 원격으로 제어, 계측하기 위해서 운영 소프트웨어가 필수적이다. 본 논문에서는 시험집광기의 제어와 계측을 위한 실시간 운영 소프트웨어의 설계와 개발에 대하여 소개하였다. 임베디드시스템으로 PXI 컨트롤러가 사용되고, 소프트웨어 개발툴로는 LabVIEW를 사용하였다. 시험집광기의 효과적인 성능 실증시험을 위하여 본 실시간 운영 소프트웨어가 개발되었다. 아울러 시험집광기의 모니터링 데이터를 관리하기 위한 데이터베이스 관리시스템(DBMS)이 MS SQL과 LabVIEW를 사용하여 개발되었다.

• 한국항만경제학회:학술대회논문집
• /
• 한국항만경제학회 2007년도 국제학술대회 및 정기총회
• /
• pp.161-173
• /
• 2007

This paper considers the problem of determining the cargo flow and the transportation mode in each trade route while satisfying the demand. Especially, the problem incorporates short sea shipping in Korea, which is becoming more important in order to improve efficiency of Logistics. The objective is to minimize the sum of shipping and inland transportation costs. To solve optimally the problem, this paper employs a linear programming model, which is an operations research technique for optimization. The problem is formulated by extending the well-known network design problem by considering capacity at seaport and limitation of total number of vehicles. The model is solved using CPLEX, a commercial linear program software. The test results using a real cargo flow data in Korea show that the model represents closely the real situation.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.101-106
• /
• 2007

In this paper, the authors demonstrate a new idea to take the place of the real pressure vessel test, which should be carried out in a high pressure experiment unit before the real sea trial test. The idea is to make a pressure vessel model as a replica of the real pressure vessel test, which can reduce the cost of making a pressure vessel and large pressure experiment unit. The pressure vessel model was designedbased on linear-elastic, buckling equations and Finite Element Analysis. The manufactured pressure vessel model was investigated and monitored while the pressure test was being conducted. After the test, the result and the validity of the pressure vessel model as a replica of the real pressure vessel test was studied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.89-90
• /
• 2008

We present an implementation and it's real-sea test of an underwater acoustic communication system, which allows the system to reduce complexity and increase robustness in time variant underwater environments. For easy adaptation to complicated and time-varying environments of the ocean, all-digital transmitter and receiver systems were implemented. For frame synchronization the CAZAC sequence was used, and QPSK modulation/demodulation method with carrier frequency of 25kHz and a bandwidth of 5kHz were applied to generate 10kbps transmission rate including overhead. To improve transmission quality, we used several techniques and algorithms such as adaptive beamforming, adaptive equalizer, and convolution coding/Viterbi decoding. For the verification of the system performance, measurement of BER has been done in a very shallow water with depth of 20m at JangMok, Geoje. During the experiment, image data were successfully transmitted up to about 9.6km.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.390-395
• /
• 2011

The main purpose of ice model basin is to assess and evaluate the performance of the Arctic ships and offshore structures because the full-scale tests in ice covered sea are usually very expensive and difficult. There are various ice conditions, such as level ice, brash ice, pack ice and ice ridge, in the real sea. To estimate their capacities in ice tank accurately, an appropriate model ice sheet and prepared ice conditions copied from actual sea ice conditions are needed. Pack ice is a floating ice that has been driven together into a single mass and a mixture of ice fragments of varying size and age that are squeezed together and cover the sea surface with little or no open water. So Ice-class vessels and Icebreaker are usually operated in pack ice conditions for the long time of her voyage. The most ice model tests include the pack ice test with the change of pack ice concentration. In this paper, the effect of pack ice size and channel breadth in pack ice model test is conducted and analyzed. Also we presented some techniques for the calculation of pack ice concentration in the model test. Finally, we developed a new model test methodology of pack ice condition in square type ice tank.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.219-224
• /
• 1998

Recently to achieve the anti-corrossive effect in propeller shafts the coating technique with suit-able coating materials is available instead of bronze-sleeved shafts. In this case the coating mate-rials in service must not be delaminated from the shaft and the crack must not be originated. Thus the various performance and security test for coating materials of propeller shaft must be carried out under the real conditions or more severe circumstance. The most important factors effecting on the funtion of coating materials in propeller shaft are the strain and the environment of sea water. In this paper therefore the maximum possible strain which can be occured in real propeller shaft was calculated based on IACA standard classification rule in order to give the proper level of strain to the test samples in performance test of propeller shaft coating materials.