• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.157-170
• /
• 2005

The combination of multiple antennas and multi-carrier code division multiple-access (MC-CDMA) is a strong candidate for the downlink of the next generation mobile communications. The study of such systems in scenarios that model real-life trans-missions is an additional step towards an optimized achievement. We consider a realistic MIMO channel with two or four transmit antennas and up to two receive antennas, and channel state information (CSI) mismatches. Depending on the mobile terminal (MT) class, its number of antennas or complexity allowed, different data-rates are proposed with turbo-coding and asymptotic spectral efficiencies from 1 to 4.5 bit/s/Hz, using three algorithms developed within the European IST-MATRICE project. These algorithms can be classified according to the degree of CSI at base-station (BS): i) Transmit space-frequency prefiltering based on constrained zero-forcing algorithm with complete CSI at BS; ii) transmit beamforming based on spatial correlation matrix estimation from partial CSI at BS; iii) orthogonal space-time block coding based on Alamouti scheme without CSI at BS. All presented schemes require a reasonable complexity at MT, and are compatible with a single-antenna receiver. A choice between these algorithms is proposed in order to significantly improve the performance of MC-CDMA and to cover the different environments considered for the next generation cellular systems. For beyond-3G, we propose prefiltering for indoor and pedestrian microcell environments, beamforming for suburban macrocells including high-speed train, and space-time coding for urban conditions with moderate to high speeds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.382-390
• /
• 2005

Huffman codes are widely used for image and video data transmission. As the increase of real-time data, a lot of studies on effective decoding algorithms and architectures have been done. In this paper, we proposed a balanced binary search tree for Huffman decoding and compared the performance of the proposed architecture with that of previous works. Based on definitions of the comparison of codewords with different lengths, the proposed architecture constructs a balanced binary tree which does not include empty internal nodes, and hence it is very efficient in the memory requirement. Performance evaluation results using actual image data show that the proposed architecture requires small number of table entries, and the decoding time is 1, 5, and 2.41 memory accesses in minimum, maximum, and average, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.163-173
• /
• 2014

Sound propagation algorithm for a sonar simulator is required to run in real-time and should be able to model the range and depth dependence of the Korean ocean environments. Ray model satisfies these requirements and we developed an algorithm for range-dependent ocean environments. In this algorithm, we considered depth-dependence of sound speed through rays based on a rectangular cell method and layer method. Range-dependence of sound speed was implemented based on a split-step method in the range direction. Eigen-ray is calculated through an interpolation of ray bundles and Gaussian interpolation function was used. The received time signal of sonar was simulated by Fourier transform of eigen-ray solution in the frequency domain. Finally, for the verification of proposed algorithm, we compared the results of transmission loss with other validated models such as BELLHOP, SNUPE, KRAKEN and OASES, for the Pekeris waveguide, wedge, and deep ocean environments. As a result, we obtained satisfactory agreements among them.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.372-375
• /
• 2004

The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.94-117
• /
• 1998

This paper investigates the performance characteristics of the data link layer of the 1996 version of IEC/ISA fieldbus which is developed as internatioal standard of fieldbus. A discrete-event simulation model of the data link layer of IEC/ISA fieldbus is developed. Using the simulation model, this paper identifies the network parameters that influence the performance of prioritys scheme and real-time data transmission, and analyzes the delay performance of IEC/ISA fieldbus with respect to the change of network parameters. The simulation model also integrates continuous-time simulation model of a control system as application process. Using the integrated simulation model, this study investigates the effect of network-induced delay on the performance of control system. Since the simulation model developed in this study can predict the network performance, it will be effectively utilized in the design phase of control and automation systems that adopt the IEC/ISA fieldbus.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.121-132
• /
• 2005

In the formation of images in a camera, the exposure time is appropriately adjusted to obtain a good image. Hence for a successful alignment of a sequence of images to the same scene, it is required to compensate the different exposure times. If we have no knowledge regarding the exposure time, then we should develop an algorithm that can compensate an image with respect to a reference image without using any camera formation models. In this paper, an exposure compensation is performed by designing predictors based on the conditional expectation between the reference and input images. Further, an adaptive predictor design is conducted to manage the irregular exposure or histogram problem. In order to alleviate the blocking artifact and the overfitting problems in the adaptive scheme, a smoothing technique, which uses the pixels of the adjacent blocks, is proposed. We successfully conducted the exposure compensation using real images obtained from digital cameras and the transmission electron microscopy.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.5
• /
• pp.81-88
• /
• 2007

To support the movement of a mobile network consisting of several mobile nodes, the IETF NEMO working group proposed NEMO basic support protocol using bi-directional tunneling between the home agent and the mobile router. Since NEMO basic support protocol is based on bi-directional tunneling, all communications to and from mobile nodes are suffer from inefficient routing all the cases. To solve the routing inefficiency problem, several proposals are proposed. However, those proposals results in new problems, such as binding update storm and changes in existing protocol. Especially, binding update storm problem may cause the delay in binding update, this subsequently causes the difficulty for a real time service and the handoff delay on the movement of mobile network. In this paper, we propose a new binding update scheme which reduces binding update latency and the handoff delay through the distribution of the transmission time of binding update messages. The performance of the proposed scheme is also evaluated to demonstrate its efficiency. Simulation results show that the proposed scheme can efficiently reduce the binding update latency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.459-462
• /
• 2005

In this paper, we investigate the high precision location estimation algorithm in 2.45GHz band RTLS with multiple tags. The location is estimated in LOS environments, 300m ${\times}$ 300m area, and 2D coordinates adopting a TDOA scheme which is not necessitate the transmission time of tags. We evaluate the average estimation error in distance assuming that tags are randomly distributed and the readers(3${\sim}$8) are uniformly(equal space) placed in test area. In results, average estimation error is 3.12m and 1.47m at reader numbers of 4 and 8, respectively. Minimum estimation error is obtained when the accumulated receiving signal from a tag is 3 or 4 regardless of available reader numbers. The error is less than 3m, satisfies the specification of RTLS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.55-61
• /
• 2002

Real-time Internet multi-media services requires fast data transmission, QoS and IP multicast. MARS is proposed to support IP multicast in the ATM Networks based on Internet, and RSVP is proposed to guarantee QoS in the Internet which is originally based on only best-effort service. In this paper, we propose two mechanisms to support IP multicast service involving QoS support over the ATM networks with MARS architecture based on multiple MCSs. In the first mechanism, when an ATM host requests joining into a specific multicast group, the MARS selects a proper MCS among the multiple MCSs to minimize the average time of transfer delay between the sender and the group members. In the second mechanism, when the RSVP reservation message from group member arrive at the MARS, the MARS which can process the RSVP reservation message select again the MCS with using the MCS management table. Finally, we recommend the mechanism to keep the QoS of Internet service and to reduce the processing-overhead between MARS and MCS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.331-335
• /
• 2020

In this study, through the accumulated technologies such as real-time monitoring of power consumption using power line communication (PLC) method, power control, and automatic blocking of standby power, to commercialize them, we developed the hardware design, algorithm, protocol and module along with data transmission using PLC. We conducted the study to develop advanced products. We also proposed cloud-based smart outlet products with a novel type of outlet. These products can measure the internal power consumption through the H/W modules and the modules that control the power of household appliances connected to the smart outlets and smart plugs. Subsequently, they transmit the measurements to the energy saving system server via a communication module. This system can control the terminal device connected to the Gateway (G/W) server through a mobile phone. This will allow the customer to check the power consumption of the building at any given time, to turn the terminal on/off, and to maximize the energy efficiency during the construction of new apartments or multi-family housing in an area.